diff options
Diffstat (limited to 'include')
36 files changed, 661 insertions, 534 deletions
diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 43077cf851..f9ee40fa7e 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -9,109 +9,19 @@ #ifndef __CONFIG_ARNDALE_H #define __CONFIG_ARNDALE_H -/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* S5P Family */ -#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ -#define CONFIG_EXYNOS5250 - -#include <asm/arch/cpu.h> /* get chip and board defs */ - -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - - -/* Allow tracing to be enabled */ -#define CONFIG_TRACE -#define CONFIG_CMD_TRACE -#define CONFIG_TRACE_BUFFER_SIZE (16 << 20) -#define CONFIG_TRACE_EARLY_SIZE (8 << 20) -#define CONFIG_TRACE_EARLY -#define CONFIG_TRACE_EARLY_ADDR 0x50000000 - -/* Keep L2 Cache Disabled */ -#define CONFIG_SYS_DCACHE_OFF - -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_TEXT_BASE 0x43E00000 - -/* input clock of PLL: SMDK5250 has 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING - -/* Power Down Modes */ -#define S5P_CHECK_SLEEP 0x00000BAD -#define S5P_CHECK_DIDLE 0xBAD00000 -#define S5P_CHECK_LPA 0xABAD0000 - -/* Offset for inform registers */ -#define INFORM0_OFFSET 0x800 -#define INFORM1_OFFSET 0x804 - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) - -/* select serial console configuration */ -#define CONFIG_BAUDRATE 115200 -#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 -#define CONFIG_SILENT_CONSOLE - -/* Console configuration */ -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define EXYNOS_DEVICE_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - EXYNOS_DEVICE_SETTINGS +#include "exynos5250-common.h" /* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_S5P_SDHCI -#define CONFIG_DWMMC -#define CONFIG_EXYNOS_DWMMC #define CONFIG_SUPPORT_EMMC_BOOT -#define CONFIG_BOUNCE_BUFFER - - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* PWM */ -#define CONFIG_PWM /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -/* Command definition*/ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_MMC #define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_NET -#define CONFIG_CMD_HASH - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS -#define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_USB_HOST_ETHER @@ -119,106 +29,23 @@ /* MMC SPL */ #define CONFIG_EXYNOS_SPL -#define COPY_BL2_FNPTR_ADDR 0x02020030 - -#define CONFIG_SPL_LIBCOMMON_SUPPORT - -/* specific .lds file */ -#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" -#define CONFIG_SPL_TEXT_BASE 0x02023400 -#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) - -#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "ARNDALE # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - -#define CONFIG_RD_LVL #define CONFIG_NR_DRAM_BANKS 8 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE -#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) -#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE -#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) -#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for ARNDALE" -#define CONFIG_SYS_MMC_ENV_DEV 0 - #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SECURE_BL1_ONLY - -/* Secure FW size configuration */ -#ifdef CONFIG_SECURE_BL1_ONLY -#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ -#else -#define CONFIG_SEC_FW_SIZE 0 -#endif - -/* Configuration of BL1, BL2, ENV Blocks on mmc */ -#define CONFIG_RES_BLOCK_SIZE (512) -#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ -#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ - -#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) -#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) #define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) -/* U-boot copy size from boot Media to DRAM.*/ -#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) -#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) - -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_PART -#define CONFIG_PARTITION_UUIDS - - #define CONFIG_IRAM_STACK 0x02050000 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK -/* I2C */ -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_I2C -#define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ -#define CONFIG_SYS_I2C_S3C24X0 -#define CONFIG_MAX_I2C_NUM 8 -#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 -#define CONFIG_I2C_EDID - /* PMIC */ #define CONFIG_PMIC #define CONFIG_POWER_I2C @@ -227,26 +54,6 @@ #define CONFIG_PREBOOT -/* Ethernet Controllor Driver */ -#ifdef CONFIG_CMD_NET -#define CONFIG_SMC911X -#define CONFIG_SMC911X_BASE 0x5000000 -#define CONFIG_SMC911X_16_BIT -#define CONFIG_ENV_SROM_BANK 1 -#endif /*CONFIG_CMD_NET*/ - -/* Enable PXE Support */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PXE -#define CONFIG_MENU -#endif - -/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT - -/* Enable Time Command */ -#define CONFIG_CMD_TIME - #define CONFIG_S5P_PA_SYSRAM 0x02020000 #define CONFIG_SMP_PEN_ADDR CONFIG_S5P_PA_SYSRAM diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 48c12ea880..b666d9494d 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -48,6 +48,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + /* * Hardware drivers */ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 10d02b4e18..7cf241e31d 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -222,7 +222,6 @@ #define CONFIG_MII #define CONFIG_ETHPRIME "FEC0" #define CONFIG_ARP_TIMEOUT 200UL -#define CONFIG_NETMASK 255.255.255.0 #define CONFIG_NET_RETRY_COUNT 5 /* USB */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 6171060e9c..eb1584d3cc 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -18,6 +18,8 @@ #define MACH_TYPE_CORVUS 2066 +#define CONFIG_SYS_GENERIC_BOARD + /* * Warning: changing CONFIG_SYS_TEXT_BASE requires * adapting the initial boot program. diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos-common.h index 99472acd0c..371f32d840 100644 --- a/include/configs/exynos4-dt.h +++ b/include/configs/exynos-common.h @@ -1,109 +1,78 @@ /* - * Copyright (C) 2014 Samsung Electronics + * Copyright (C) 2013 Samsung Electronics * - * Configuration settings for the SAMSUNG EXYNOS5 board. + * Common configuration settings for the SAMSUNG EXYNOS boards. * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __EXYNOS_COMMON_H +#define __EXYNOS_COMMON_H /* High Level Configuration Options */ #define CONFIG_SAMSUNG /* in a SAMSUNG core */ #define CONFIG_S5P /* S5P Family */ -#define CONFIG_EXYNOS4 /* which is in a Exynos4 Family */ #include <asm/arch/cpu.h> /* get chip and board defs */ +#include <linux/sizes.h> +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOARD_COMMON -#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F + +/* Enable fdt support */ +#define CONFIG_OF_LIBFDT -#define CONFIG_SYS_CACHELINE_SIZE 32 +/* Keep L2 Cache Disabled */ +#define CONFIG_CMD_CACHE -/* input clock of PLL: EXYNOS4 boards have 24MHz input clock */ +/* input clock of PLL: 24MHz input clock */ #define CONFIG_SYS_CLK_FREQ 24000000 #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING +#define CONFIG_ENV_OVERWRITE -#include <linux/sizes.h> +/* Size of malloc() pool before and after relocation */ +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) + +/* select serial console configuration */ +#define CONFIG_BAUDRATE 115200 /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC #define CONFIG_MMC #define CONFIG_S5P_SDHCI #define CONFIG_SDHCI -#define CONFIG_MMC_SDMA #define CONFIG_DWMMC #define CONFIG_EXYNOS_DWMMC #define CONFIG_BOUNCE_BUFFER -#define CONFIG_MMC_DEFAULT_DEV 0 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* PWM */ #define CONFIG_PWM -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - /* Command definition*/ #include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_ONENAND -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_CACHE #define CONFIG_CMD_MMC -#define CONFIG_CMD_DFU -#define CONFIG_CMD_GPT -#define CONFIG_CMD_PMIC -#define CONFIG_CMD_SETEXPR - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -/* FAT */ -#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE - -/* EXT4 */ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE -/* USB Composite download gadget - g_dnl */ -#define CONFIG_USBDOWNLOAD_GADGET - -/* TIZEN THOR downloader support */ -#define CONFIG_CMD_THOR_DOWNLOAD -#define CONFIG_THOR_FUNCTION - -#define CONFIG_DFU_FUNCTION -#define CONFIG_DFU_MMC -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M -#define DFU_DEFAULT_POLL_TIMEOUT 300 - -/* USB Samsung's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 -#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 -#define CONFIG_G_DNL_MANUFACTURER "Samsung" +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -111,6 +80,7 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE @@ -118,22 +88,4 @@ #define CONFIG_SYS_NO_FLASH #undef CONFIG_CMD_IMLS -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_PART -#define CONFIG_PARTITION_UUIDS - -#define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 - -#define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE - -/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT - #endif /* __CONFIG_H */ diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h new file mode 100644 index 0000000000..89ba14e05d --- /dev/null +++ b/include/configs/exynos4-common.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * + * Configuration settings for the SAMSUNG EXYNOS5 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_EXYNOS4_COMMON_H +#define __CONFIG_EXYNOS4_COMMON_H + +#define CONFIG_EXYNOS4 /* Exynos4 Family */ + +#include "exynos-common.h" + +#define CONFIG_BOARD_COMMON + +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_REVISION_TAG + +/* SD/MMC configuration */ +#define CONFIG_MMC_SDMA +#define CONFIG_MMC_DEFAULT_DEV 0 + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG +#undef CONFIG_CMD_ONENAND +#undef CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_DFU +#define CONFIG_CMD_GPT +#define CONFIG_CMD_PMIC +#define CONFIG_CMD_SETEXPR + +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET + +/* TIZEN THOR downloader support */ +#define CONFIG_CMD_THOR_DOWNLOAD +#define CONFIG_THOR_FUNCTION + +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +/* USB Samsung's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D +#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 +#define CONFIG_G_DNL_MANUFACTURER "Samsung" + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE + +#endif /* __CONFIG_EXYNOS4_COMMON_H */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-common.h index 1dc3002523..ba591e7c1e 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-common.h @@ -6,22 +6,14 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* S5P Family */ -#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ - -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOARD_COMMON -#define CONFIG_ARCH_EARLY_INIT_R +#ifndef __CONFIG_EXYNOS5_COMMON_H +#define __CONFIG_EXYNOS5_COMMON_H + +#define CONFIG_EXYNOS5 /* Exynos5 Family */ + +#include "exynos-common.h" + +#define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_EXYNOS_SPL /* Allow tracing to be enabled */ @@ -32,22 +24,11 @@ #define CONFIG_TRACE_EARLY #define CONFIG_TRACE_EARLY_ADDR 0x50000000 -/* Keep L2 Cache Disabled */ -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_SYS_CACHELINE_SIZE 64 /* Enable ACE acceleration for SHA1 and SHA256 */ #define CONFIG_EXYNOS_ACE_SHA #define CONFIG_SHA_HW_ACCEL -/* input clock of PLL: SMDK5250 has 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING - /* Power Down Modes */ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 @@ -59,66 +40,26 @@ #define INFORM2_OFFSET 0x808 #define INFORM3_OFFSET 0x80c -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) - /* select serial console configuration */ #define CONFIG_BAUDRATE 115200 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 #define CONFIG_SILENT_CONSOLE - -/* Enable keyboard */ -#define CONFIG_CROS_EC /* CROS_EC protocol */ -#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ -#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */ -#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */ -#define CONFIG_CMD_CROS_EC -#define CONFIG_KEYBOARD - -/* Console configuration */ -#define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_CONSOLE_MUX + #define EXYNOS_DEVICE_SETTINGS \ - "stdin=serial,cros-ec-keyb\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" #define CONFIG_EXTRA_ENV_SETTINGS \ EXYNOS_DEVICE_SETTINGS -/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_S5P_SDHCI -#define CONFIG_DWMMC -#define CONFIG_EXYNOS_DWMMC -#define CONFIG_SUPPORT_EMMC_BOOT -#define CONFIG_BOUNCE_BUFFER - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* PWM */ -#define CONFIG_PWM - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command definition*/ -#include <config_cmd_default.h> - #define CONFIG_CMD_PING #define CONFIG_CMD_ELF -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_NET #define CONFIG_CMD_HASH -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - /* Thermal Management Unit */ #define CONFIG_EXYNOS_TMU #define CONFIG_CMD_DTT @@ -133,6 +74,7 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 +#define CONFIG_SUPPORT_EMMC_BOOT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT @@ -140,15 +82,7 @@ /* specific .lds file */ #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) @@ -175,10 +109,6 @@ #define CONFIG_SYS_MONITOR_BASE 0x00000000 -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS - #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SECURE_BL1_ONLY @@ -199,23 +129,13 @@ #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) -/* Store environment at the end of a 4 MB SPI flash */ -#define FLASH_SIZE (0x4 << 20) -#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) - /* U-boot copy size from boot Media to DRAM.*/ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) -#define CONFIG_SPI_BOOTING #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_PART -#define CONFIG_PARTITION_UUIDS - /* I2C */ #define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_I2C @@ -227,10 +147,6 @@ #define CONFIG_I2C_EDID /* SPI */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_SPI_FLASH -#define CONFIG_ENV_SPI_BASE 0x12D30000 - #ifdef CONFIG_SPI_FLASH #define CONFIG_EXYNOS_SPI #define CONFIG_CMD_SF @@ -250,11 +166,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 50000000 #endif -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_TPS65090 - /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_SMC911X @@ -269,9 +180,6 @@ #define CONFIG_MENU #endif -/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT - /* SHA hashing */ #define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY @@ -291,4 +199,8 @@ #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 -#endif /* __CONFIG_H */ +/* Enable FIT support and comparison */ +#define CONFIG_FIT +#define CONFIG_FIT_BEST_MATCH + +#endif /* __CONFIG_EXYNOS5_COMMON_H */ diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h new file mode 100644 index 0000000000..66547fa34e --- /dev/null +++ b/include/configs/exynos5-dt-common.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * Configuration settings for generic Exynos 5 board + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_EXYNOS5_DT_COMMON_H +#define __CONFIG_EXYNOS5_DT_COMMON_H + +#include "exynos5-common.h" + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_TPS65090 + +/* Enable keyboard */ +#define CONFIG_CROS_EC /* CROS_EC protocol */ +#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */ +#define CONFIG_CMD_CROS_EC +#define CONFIG_KEYBOARD + +/* Console configuration */ +#undef EXYNOS_DEVICE_SETTINGS +#define EXYNOS_DEVICE_SETTINGS \ + "stdin=serial,cros-ec-keyb\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + EXYNOS_DEVICE_SETTINGS + +#endif diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-common.h index c24984bd2b..713614f3ad 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-common.h @@ -10,7 +10,7 @@ #ifndef __CONFIG_5250_H #define __CONFIG_5250_H -#include <configs/exynos5-dt.h> +#include <configs/exynos5-common.h> #define CONFIG_EXYNOS5250 #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -24,8 +24,6 @@ /* USB */ #define CONFIG_CMD_USB -#define CONFIG_USB_XHCI -#define CONFIG_USB_XHCI_EXYNOS #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE @@ -33,9 +31,6 @@ #define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" -#define CONFIG_SYS_PROMPT "SMDK5250 # " -#define CONFIG_IDENT_STRING " for SMDK5250" - #define CONFIG_IRAM_STACK 0x02050000 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK diff --git a/include/configs/exynos5420.h b/include/configs/exynos5420-common.h index d2a95567a8..b0f940cd16 100644 --- a/include/configs/exynos5420.h +++ b/include/configs/exynos5420-common.h @@ -9,7 +9,18 @@ #ifndef __CONFIG_EXYNOS5420_H #define __CONFIG_EXYNOS5420_H -#define CONFIG_EXYNOS5420 /* which is in a Exynos5 Family */ +#define CONFIG_EXYNOS5420 + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH +#define CONFIG_ENV_SPI_BASE 0x12D30000 +#define FLASH_SIZE (0x4 << 20) +#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) +#define CONFIG_SPI_BOOTING + +#include <configs/exynos5-common.h> + +#define CONFIG_ARCH_EARLY_INIT_R #define MACH_TYPE_SMDK5420 8002 #define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420 @@ -31,14 +42,12 @@ #define CONFIG_MAX_I2C_NUM 11 -/* Enable FIT support and comparison */ -#define CONFIG_FIT -#define CONFIG_FIT_BEST_MATCH - #define CONFIG_BOARD_REV_GPIO_COUNT 2 #define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000" +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 + /* * Put the initial stack pointer 1KB below this to allow room for the * SPL marker. This value is arbitrary, but gd_t is placed starting here. @@ -49,4 +58,7 @@ #define CONFIG_NR_DRAM_BANKS 7 #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ +/* Miscellaneous configurable options */ +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" + #endif /* __CONFIG_EXYNOS5420_H */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 21667d1f78..e015e9091b 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -89,6 +89,7 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF0 +#define CONFIG_SCIF_USE_EXT_CLK #undef CONFIG_SYS_CONSOLE_INFO_QUIET #undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE diff --git a/include/configs/lager.h b/include/configs/lager.h index 6e9d67d690..699135fc0e 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -90,6 +90,7 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF0 +#define CONFIG_SCIF_USE_EXT_CLK #undef CONFIG_SYS_CONSOLE_INFO_QUIET #undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE @@ -167,7 +168,7 @@ #define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) #define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) #define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_MP_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */ #define CONFIG_SYS_TMU_CLK_DIV 4 diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index fccd29dc26..efe770b81b 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -32,6 +32,7 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GPIO #define CONFIG_CMD_GREPENV #define CONFIG_CMD_I2C @@ -236,7 +237,7 @@ "addargs=run addcons addmtd addmisc\0" \ "mmcload=" \ "mmc rescan ; " \ - "ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \ + "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \ "ubiload=" \ "ubi part UBI ; ubifsmount ubi0:rootfs ; " \ "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \ @@ -279,10 +280,12 @@ "bootm ${kernel_addr_r}\0" \ "try_bootscript=" \ "mmc rescan;" \ - "if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ - "then;" \ - "\techo Running bootscript...;" \ - "\tsource ${kernel_addr_r};" \ + "if test -e mmc 0:2 ${bootscript} ; then " \ + "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ + "then ; " \ + "echo Running bootscript... ; " \ + "source ${kernel_addr_r} ; " \ + "fi ; " \ "fi\0" /* The rest of the configuration is shared */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index df6a226109..c133ba9d03 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -38,6 +38,7 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GREPENV #define CONFIG_CMD_I2C #define CONFIG_CMD_MII @@ -305,7 +306,7 @@ "addargs=run addcons addmtd addmisc\0" \ "mmcload=" \ "mmc rescan ; " \ - "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ + "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ "ubiload=" \ "ubi part UBI ; ubifsmount ubi0:rootfs ; " \ "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \ @@ -348,10 +349,12 @@ "bootm ${kernel_addr_r}\0" \ "try_bootscript=" \ "mmc rescan;" \ - "if ext4load mmc 0:1 ${kernel_addr_r} ${bootscript};" \ - "then;" \ - "\techo Running bootscript...;" \ - "\tsource ${kernel_addr_r};" \ + "if test -e mmc 0:1 ${bootscript} ; then " \ + "if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \ + "then ; " \ + "echo Running bootscript... ; " \ + "source ${kernel_addr_r} ; " \ + "fi ; " \ "fi\0" #endif /* __M53EVK_CONFIG_H__ */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index d464ad964b..c02e29be9a 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -14,6 +14,7 @@ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0x81200000 #define CONFIG_MXC_GPIO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TIMER_RATE 32768 #define CONFIG_SYS_TIMER_COUNTER \ @@ -100,7 +101,7 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR IMX_MMC_SDHC1_BASE #define CONFIG_SYS_FSL_ESDHC_NUM 1 /* PMIC Configs */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index b389475ebe..d6e8ec4e13 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -26,6 +26,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_OF_LIBFDT @@ -69,7 +70,7 @@ * MMC Configs * */ #define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_NUM 2 #define CONFIG_MMC diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 35c0a85080..6e01fa0435 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -10,7 +10,6 @@ #define __CONFIG_H #define CONFIG_MX6 -#define CONFIG_MX6Q #include "mx6_common.h" @@ -37,7 +36,7 @@ /* MMC Configs */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_MMC @@ -69,18 +68,22 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc3\0" \ + "fdt_file=imx6q-arm2.dtb\0" \ + "fdt_addr=0x18000000\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=1\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ @@ -88,15 +91,46 @@ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootz\0" \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${image}; bootz\0" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ @@ -134,7 +168,6 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 4208ba1563..fddedf1a8e 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -40,7 +40,7 @@ /* MMC Configs */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR #define CONFIG_MMC #define CONFIG_CMD_MMC diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index b92d9443d4..e02ea18a64 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -159,7 +159,7 @@ /* MMC Configuration */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR #define CONFIG_MMC #define CONFIG_CMD_MMC @@ -204,8 +204,8 @@ #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 1) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 0) +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) +#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif /* FLASH and environment organization */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 39d5bb34bb..6d379ed7ad 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -32,6 +32,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_CMD_GPIO #define CONFIG_CI_UDC #define CONFIG_USBD_HS #define CONFIG_USB_GADGET_DUALSPEED @@ -63,6 +64,7 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_I2C_EDID /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -75,6 +77,8 @@ #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -122,6 +126,8 @@ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP /* Miscellaneous commands */ #define CONFIG_CMD_BMODE @@ -137,7 +143,6 @@ #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_CMD_HDMIDETECT #define CONFIG_CONSOLE_MUX @@ -173,7 +178,14 @@ #define CONFIG_DRIVE_MMC #endif -#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC +#ifdef CONFIG_USB_STORAGE +#define CONFIG_DRIVE_USB "usb " +#else +#define CONFIG_DRIVE_USB +#endif + +#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB +#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC #if defined(CONFIG_SABRELITE) #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -186,7 +198,7 @@ "fdt_addr=0x18000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ + "mmcdevs=0 1\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -238,47 +250,71 @@ "fi;\0" #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" + "for mmcdev in ${mmcdevs}; do " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "done; " \ + "run netboot; " #else #define CONFIG_EXTRA_ENV_SETTINGS \ + "bootdevs=" CONFIG_DRIVE_TYPES "\0" \ + "umsdevs=" CONFIG_UMSDEVS "\0" \ "console=ttymxc1\0" \ "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ "sf erase 0xc0000 0x2000 && " \ "echo restored environment to factory default ; fi\0" \ - "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \ + "bootcmd=for dtype in ${bootdevs}" \ "; do " \ + "if itest.s \"xusb\" == \"x${dtype}\" ; then " \ + "usb start ;" \ + "fi; " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ - "for fs in fat ext2 ; do " \ - "${fs}load " \ - "${dtype} ${disk}:1 " \ - "10008000 " \ - "/6x_bootscript" \ - "&& source 10008000 ; " \ - "done ; " \ + "load " \ + "${dtype} ${disk}:1 " \ + "10008000 " \ + "/6x_bootscript" \ + "&& source 10008000 ; " \ "done ; " \ "done; " \ "setenv stdout serial,vga ; " \ "echo ; echo 6x_bootscript not found ; " \ "echo ; echo serial console at 115200, 8N1 ; echo ; " \ "echo details at http://boundarydevices.com/6q_bootscript ; " \ - "setenv stdout serial\0" \ - "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \ + "setenv stdout serial;" \ + "setenv stdin serial,usbkbd;" \ + "for dtype in ${umsdevs} ; do " \ + "if itest.s sata == ${dtype}; then " \ + "initcmd='sata init' ;" \ + "else " \ + "initcmd='mmc rescan' ;" \ + "fi; " \ + "for disk in 0 1 ; do " \ + "if $initcmd && $dtype dev $disk ; then " \ + "setenv stdout serial,vga; " \ + "echo expose ${dtype} ${disk} " \ + "over USB; " \ + "ums 0 $dtype $disk ;" \ + "fi; " \ + " done; " \ + "done ;" \ + "setenv stdout serial,vga; " \ + "echo no block devices found;" \ + "\0" \ + "initrd_high=0xffffffff\0" \ + "upgradeu=for dtype in ${bootdevs}" \ "; do " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ - "for fs in fat ext2 ; do " \ - "${fs}load ${dtype} ${disk}:1 10008000 " \ - "/6x_upgrade " \ - "&& source 10008000 ; " \ - "done ; " \ + "load ${dtype} ${disk}:1 10008000 " \ + "/6x_upgrade " \ + "&& source 10008000 ; " \ "done ; " \ "done\0" \ @@ -292,7 +328,7 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_MAXARGS 48 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 @@ -349,6 +385,7 @@ #define CONFIG_CMD_BMP #define CONFIG_CMD_TIME +#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_CMD_BOOTZ @@ -365,4 +402,22 @@ #define CONFIG_PCIE_IMX #endif +#define CONFIG_CMD_ELF + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +/* Netchip IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "Boundary" + +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 + #endif /* __CONFIG_H */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index b616ac2fbd..b928af839e 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -12,7 +12,7 @@ #ifndef __CONFIG_ODROID_U3_H #define __CONFIG_ODROID_U3_H -#include <configs/exynos4-dt.h> +#include <configs/exynos4-common.h> #define CONFIG_SYS_PROMPT "Odroid # " /* Monitor Command Prompt */ @@ -37,8 +37,6 @@ #define CONFIG_SYS_TEXT_BASE 0x43e00000 #include <linux/sizes.h> -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) /* select serial console configuration */ #define CONFIG_SERIAL1 diff --git a/include/configs/origen.h b/include/configs/origen.h index fb1536c62c..da9d6a1ee1 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -9,7 +9,7 @@ #ifndef __CONFIG_ORIGEN_H #define __CONFIG_ORIGEN_H -#include <configs/exynos4-dt.h> +#include <configs/exynos4-common.h> #define CONFIG_SYS_PROMPT "ORIGEN # " @@ -35,9 +35,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) - /* select serial console configuration */ #define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h new file mode 100644 index 0000000000..071880fe75 --- /dev/null +++ b/include/configs/ot1200.h @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2014 Bachmann electronic GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_MXC_GPIO + +/* FUSE Configs */ +#define CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP + +/* UART Configs */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* SF Configs */ +#define CONFIG_CMD_SF +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 2 +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(1, 3)<<8)) +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + +/* IO expander */ +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 +#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* OCOTP Configs */ +#define CONFIG_CMD_IMXOTP +#define CONFIG_IMX_OTP +#define IMX_OTP_BASE OCOTP_BASE_ADDR +#define IMX_OTP_ADDR_MAX 0x7F +#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA +#define IMX_OTPWRITE_ENABLED + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER + +#ifdef CONFIG_MX6Q +#define CONFIG_CMD_SATA +#endif + +/* + * SATA Configs + */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE MII100 +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0x5 +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 2 + +#define CONFIG_PREBOOT "" + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_CBSIZE 1024 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_CMDLINE_EDITING + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (64 * 1024) /* 64 kb */ +#define CONFIG_ENV_OFFSET (1024 * 1024) +/* M25P16 has an erase size of 64 KiB */ +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD + +/* FS Configs */ +#define CONFIG_CMD_EXT3 +#define CONFIG_CMD_EXT4 +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FS_GENERIC + +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_BOOTFILE + +#endif /* __CONFIG_H */ diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 987cef504c..ab8ac60df2 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -9,10 +9,16 @@ #ifndef __CONFIG_PEACH_PIT_H #define __CONFIG_PEACH_PIT_H -#include <configs/exynos5-dt.h> +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH +#define CONFIG_ENV_SPI_BASE 0x12D30000 +#define FLASH_SIZE (0x4 << 20) +#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) -#include <configs/exynos5420.h> +#include <configs/exynos5420-common.h> +#include <configs/exynos5-dt-common.h> +#define CONFIG_BOARD_COMMON /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ @@ -30,4 +36,10 @@ #define LCD_BPP LCD_COLOR16 #endif +#define CONFIG_POWER_TPS65090_EC +#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ + +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_EXYNOS + #endif /* __CONFIG_PEACH_PIT_H */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index a51215d9ae..0c6e9c7878 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -39,8 +39,9 @@ #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING -/* Size of malloc() pool.*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M) +/* Size of malloc() pool before and after relocation */ +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* * select serial console configuration @@ -53,6 +54,7 @@ #define CONFIG_MMC #define CONFIG_SDHCI #define CONFIG_S5P_SDHCI +#define SDHCI_MAX_HOSTS 4 /* PWM */ #define CONFIG_PWM 1 @@ -106,7 +108,6 @@ ",12m(modem)"\ ",60m(qboot)\0" -#define CONFIG_BOOTDELAY 1 #define CONFIG_ZERO_BOOTDELAY_CHECK /* partitions definitions */ @@ -283,4 +284,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_OF_LIBFDT + #endif /* __CONFIG_H */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 082d51c52b..27f3d0af47 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -10,7 +10,7 @@ #ifndef __CONFIG_UNIVERSAL_H #define __CONFIG_UNIVERSAL_H -#include <configs/exynos4-dt.h> +#include <configs/exynos4-common.h> #define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */ @@ -27,9 +27,6 @@ #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) - /* select serial console configuration */ #define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 61170941c1..83953728dd 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -9,11 +9,26 @@ #ifndef __CONFIG_SMDK_H #define __CONFIG_SMDK_H -#include <configs/exynos5250-dt.h> +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH +#define CONFIG_ENV_SPI_BASE 0x12D30000 +#define FLASH_SIZE (0x4 << 20) +#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) +#define CONFIG_SPI_BOOTING +#include <configs/exynos5250-common.h> -/* Enable FIT support and comparison */ -#define CONFIG_FIT -#define CONFIG_FIT_BEST_MATCH + +#define CONFIG_BOARD_COMMON +#define CONFIG_ARCH_EARLY_INIT_R + +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_EXYNOS + +#define CONFIG_SYS_PROMPT "SMDK5250 # " +#define CONFIG_IDENT_STRING " for SMDK5250" + +/* Miscellaneous configurable options */ +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" #endif /* __CONFIG_SMDK_H */ diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 36a156f7a7..fd2d482e4a 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -9,9 +9,9 @@ #ifndef __CONFIG_SMDK5420_H #define __CONFIG_SMDK5420_H -#include <configs/exynos5-dt.h> +#include <configs/exynos5420-common.h> -#include <configs/exynos5420.h> +#define CONFIG_BOARD_COMMON #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ @@ -21,5 +21,6 @@ #define CONFIG_SYS_PROMPT "SMDK5420 # " #define CONFIG_IDENT_STRING " for SMDK5420" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" #endif /* __CONFIG_SMDK5420_H */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index c9a2e1568f..22835ffd64 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -47,6 +47,10 @@ * 1MB = 0x100000, 0x100000 = 1024 * 1024 */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) + +/* Small malloc pool before relocation */ +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) + /* * select serial console configuration */ @@ -217,4 +221,6 @@ #define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/ #endif /* CONFIG_CMD_NET */ +#define CONFIG_OF_LIBFDT + #endif /* __CONFIG_H */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 048c178692..a2469eb60c 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -9,71 +9,42 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include "exynos4-common.h" + +#undef CONFIG_BOARD_COMMON +#undef CONFIG_USB_GADGET +#undef CONFIG_USB_GADGET_S3C_UDC_OTG +#undef CONFIG_CMD_USB_MASS_STORAGE +#undef CONFIG_REVISION_TAG +#undef CONFIG_CMD_THOR_DOWNLOAD +#undef CONFIG_CMD_DFU + /* High Level Configuration Options */ -#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ -#define CONFIG_S5P 1 /* S5P Family */ -#define CONFIG_EXYNOS4 /* EXYNOS4 Family */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ #define CONFIG_SMDKV310 1 /* working with SMDKV310*/ -#include <asm/arch/cpu.h> /* get chip and board defs */ - -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOARD_EARLY_INIT_F - /* Mach Type */ #define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310 #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_TEXT_BASE 0x43E00000 -/* input clock of PLL: SMDKV310 has 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING - /* Handling Sleep Mode*/ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 #define S5P_CHECK_LPA 0xABAD0000 -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) - /* select serial console configuration */ #define CONFIG_SERIAL1 1 /* use SERIAL 1 */ -#define CONFIG_BAUDRATE 115200 #define EXYNOS4_DEFAULT_UART_OFFSET 0x010000 -/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_S5P_SDHCI - -/* PWM */ -#define CONFIG_PWM 1 - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -/* Command definition*/ -#include <config_cmd_default.h> - #define CONFIG_CMD_PING #define CONFIG_CMD_ELF #define CONFIG_CMD_DHCP -#define CONFIG_CMD_MMC #define CONFIG_CMD_NET -#define CONFIG_CMD_FAT - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* MMC SPL */ #define CONFIG_SKIP_LOWLEVEL_INIT @@ -84,15 +55,8 @@ #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "SMDKV310 # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) @@ -111,8 +75,6 @@ #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE /* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH 1 -#undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for SMDKC210/V310" #define CONFIG_CLK_1000_400_200 @@ -126,7 +88,6 @@ #define RESERVE_BLOCK_SIZE (512) #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) -#define CONFIG_DOS_PARTITION 1 #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) @@ -146,6 +107,4 @@ #define CONFIG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/ -/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT #endif /* __CONFIG_H */ diff --git a/include/configs/snow.h b/include/configs/snow.h index fbaaa593cc..7eaa58697e 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -9,11 +9,28 @@ #ifndef __CONFIG_SNOW_H #define __CONFIG_SNOW_H -#include <configs/exynos5250-dt.h> +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH +#define CONFIG_ENV_SPI_BASE 0x12D30000 +#define FLASH_SIZE (0x4 << 20) +#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) +#define CONFIG_SPI_BOOTING +#include <configs/exynos5250-common.h> +#include <configs/exynos5-dt-common.h> -/* Enable FIT support and comparison */ -#define CONFIG_FIT -#define CONFIG_FIT_BEST_MATCH + +#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */ +#define CONFIG_POWER_TPS65090_I2C + +#define CONFIG_BOARD_COMMON +#define CONFIG_ARCH_EARLY_INIT_R + +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_EXYNOS + +#define CONFIG_SYS_PROMPT "snow # " +#define CONFIG_IDENT_STRING " for snow" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" #endif /* __CONFIG_SNOW_H */ diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 20d4cee011..aadf4cd2f8 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -24,6 +24,8 @@ #define MACH_TYPE_TAURUS 2067 #define MACH_TYPE_AXM 2068 +#define CONFIG_SYS_GENERIC_BOARD + /* * Warning: changing CONFIG_SYS_TEXT_BASE requires * adapting the initial boot program. diff --git a/include/configs/trats.h b/include/configs/trats.h index 43751e7938..b21ea2de5f 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -10,7 +10,7 @@ #ifndef __CONFIG_TRATS_H #define __CONFIG_TRATS_H -#include <configs/exynos4-dt.h> +#include <configs/exynos4-common.h> #define CONFIG_SYS_PROMPT "Trats # " /* Monitor Command Prompt */ @@ -39,10 +39,6 @@ #define CONFIG_SYS_TEXT_BASE 0x63300000 -#include <linux/sizes.h> -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) - /* select serial console configuration */ #define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/trats2.h b/include/configs/trats2.h index e9a04f7af3..42481ab6e1 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -11,7 +11,7 @@ #ifndef __CONFIG_TRATS2_H #define __CONFIG_TRATS2_H -#include <configs/exynos4-dt.h> +#include <configs/exynos4-common.h> #define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */ @@ -36,10 +36,6 @@ #define CONFIG_SYS_TEXT_BASE 0x43e00000 -#include <linux/sizes.h> -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) - /* select serial console configuration */ #define CONFIG_SERIAL2 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 0342550412..6fd0b173eb 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -14,6 +14,7 @@ #define CONFIG_VF610 +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -44,6 +45,41 @@ #undef CONFIG_CMD_IMLS +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_VF610_NFC +#define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR + +/* UBI */ +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +/* Dynamic MTD partition support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=fsl_nfc" +#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \ + "128k(vf-bcb)ro," \ + "1408k(u-boot)ro," \ + "512k(u-boot-env)," \ + "4m(kernel)," \ + "512k(fdt)," \ + "-(rootfs)" +#endif + #define CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -218,11 +254,19 @@ /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH +#ifdef CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (12 * 64 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (64 * 2048) +#define CONFIG_ENV_SECT_SIZE (64 * 2048) +#define CONFIG_ENV_RANGE (512 * 1024) +#define CONFIG_ENV_OFFSET 0x180000 +#endif #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 7d96908f0e..9fb501a341 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -110,6 +110,11 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb" #elif defined(CONFIG_MX6Q) |
