diff options
Diffstat (limited to 'include/configs')
30 files changed, 35 insertions, 5 deletions
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index ce7ccc2789..09185b1dbb 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -35,6 +35,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_CPU86 1 /* ...on a CPU86 board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ /* * select serial console configuration diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 0e0876f807..c50870fedc 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -36,6 +36,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_CPU87 1 /* ...on a CPU87 board */ #define CONFIG_PCI +#define CONFIG_CPM2 1 /* Has a CPM2 */ /* * select serial console configuration diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index c4fb01d8a9..729b048691 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -37,6 +37,7 @@ #define CONFIG_MPC8272_FAMILY 1 #define CONFIG_IDS8247 1 #define CPU_ID_STR "MPC8247" +#define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index 6b7079edf6..c1565fc037 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -40,6 +40,8 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_IPHASE4539 1 /* ...on a Interphase 4539 PMC */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ + /*----------------------------------------------------------------------- * select serial console configuration * diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 8aa18caa7e..65056a21ee 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -31,6 +31,7 @@ #define CONFIG_MPC8260 /* This is an MPC8260 CPU */ #define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ /*----------------------------------------------------------------------- * Select serial console configuration diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index ed8fe6b075..bba476a6a0 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -42,6 +42,8 @@ #define CONFIG_MPC8260ADS 1 /* Motorola PQ2 ADS family board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ + /* * Figure out if we are booting low via flash HRCW or high via the BCSR. */ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 89f2d096fd..d8e91a5306 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -51,6 +51,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_MPC8266ADS 1 /* ...on motorola ADS board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 3dd4957bc7..cf15b88390 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -33,6 +33,7 @@ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ +#define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8541 1 /* MPC8541 specific */ #define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 379a12cc69..78b622fdde 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -33,6 +33,7 @@ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ +#define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8555 1 /* MPC8555 specific */ #define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 7271737381..e1a2bba8a0 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -38,7 +38,7 @@ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC8560 1 /* MPC8560 specific */ +#define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ #define CONFIG_PCI diff --git a/include/configs/PM826.h b/include/configs/PM826.h index a4c4fc973d..9ca1e52299 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -37,6 +37,7 @@ #define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #define CONFIG_PM826 1 /* ...on a PM8260 module */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ #undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */ diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 5b71c960fa..7d98df5cac 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -37,6 +37,7 @@ #define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #define CONFIG_PM828 1 /* ...on a PM828 module */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ #undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */ diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index cdf716cb24..6ae9403c46 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -173,6 +173,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_RPXSUPER 1 /* on an Embedded Planet RPX Super Board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index f98a6c60b0..a55297096f 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -33,6 +33,8 @@ #define CPU_ID_STR "MPC8250" #endif /* CONFIG_MPC8248 */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ + #define CONFIG_RATTLER /* Analogue&Micro Rattler board */ #undef DEBUG diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 60561eb22b..5bdabfee9a 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -46,7 +46,7 @@ #define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ -#define CONFIG_MPC8560 1 /* MPC8560 (CPU) specific */ +#define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_SBC8540 1 /* configuration for SBC8560 board */ diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h index 6bd0abe763..ca7e5dd9d9 100644 --- a/include/configs/SBC8560.h +++ b/include/configs/SBC8560.h @@ -46,7 +46,7 @@ #define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ -#define CONFIG_MPC8560 1 /* MPC8560 (CPU) specific */ +#define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_SBC8560 1 /* configuration for SBC8560 board */ #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */ diff --git a/include/configs/SCM.h b/include/configs/SCM.h index e4533b465b..91914e80de 100644 --- a/include/configs/SCM.h +++ b/include/configs/SCM.h @@ -36,6 +36,7 @@ #define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */ #define CONFIG_SCM 1 /* ...on a System Controller Module */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ #if (CONFIG_TQM8260 <= 100) # error "TQM8260 module revison not supported" diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index eaf138acbf..e6266b58d1 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -52,6 +52,8 @@ #define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */ #endif +#define CONFIG_CPM2 1 /* Has a CPM2 */ + #define CONFIG_82xx_CONS_SMC1 1 /* console on SMC1 */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index 685797327e..f71e691b26 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -30,6 +30,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */ #define CPU_ID_STR "MPC8265" +#define CONFIG_CPM2 1 /* Has a CPM2 */ #undef DEBUG diff --git a/include/configs/atc.h b/include/configs/atc.h index 275124830f..881a4caee6 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -35,6 +35,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_ATC 1 /* ...on a ATC board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ /* * select serial console configuration diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index b3ec89b05b..aea2e64365 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -35,6 +35,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_COGENT 1 /* using Cogent Modular Architecture */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index fb335db804..98e1716bf1 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -48,6 +48,8 @@ #define CFG_EP8260_H2 1 /* #undef CFG_EP8260_H2 */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ + /* What is the oscillator's (UX2) frequency in Hz? */ #define CONFIG_8260_CLKIN (66 * 1000 * 1000) diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 3666bdbb7e..6c080437ff 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -330,6 +330,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_GW8260 1 /* on an GW8260 Board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 90d6b25bdb..0d62b9efde 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -35,6 +35,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_HYMOD 1 /* ...on a Hymod board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 2ad2867351..60b0b3713b 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -297,6 +297,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index b1f6cb20ea..6c9e392c36 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -37,6 +37,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_RSD_PROTO 1 /* on a R&S Protocol Board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index cc9774c6a4..031eba597d 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -544,6 +544,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_SBC8260 1 /* on an EST SBC8260 Board */ #define CONFIG_SACSng 1 /* munged for the SACSng */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index dc9cec360c..45e4494ec6 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -481,6 +481,7 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_SBC8260 1 /* on an EST SBC8260 Board */ +#define CONFIG_CPM2 1 /* Has a CPM2 */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 8cf9eeb3d4..72a3091d5f 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -40,7 +40,7 @@ #define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ -#define CONFIG_MPC8560 1 /* MPC8560 specific */ +#define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_SBC8560 1 /* configuration for SBC8560 board */ /* XXX flagging this as something I might want to delete */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index e9261db30a..b5684d334b 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -39,7 +39,7 @@ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC8560 1 /* MPC8560 specific */ +#define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/ #undef CONFIG_PCI /* pci ethernet support */ |
