diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/aristainetos-common.h | 3 | ||||
| -rw-r--r-- | include/configs/cgtqmx6eval.h | 165 | ||||
| -rw-r--r-- | include/configs/cm_fx6.h | 17 | ||||
| -rw-r--r-- | include/configs/embestmx6boards.h | 5 | ||||
| -rw-r--r-- | include/configs/gw_ventana.h | 5 | ||||
| -rw-r--r-- | include/configs/imx6_spl.h | 2 | ||||
| -rw-r--r-- | include/configs/mx53loco.h | 7 | ||||
| -rw-r--r-- | include/configs/mx6_common.h | 10 | ||||
| -rw-r--r-- | include/configs/mx6cuboxi.h | 2 | ||||
| -rw-r--r-- | include/configs/mx6qsabreauto.h | 5 | ||||
| -rw-r--r-- | include/configs/mx6sabre_common.h | 28 | ||||
| -rw-r--r-- | include/configs/mx6sabresd.h | 5 | ||||
| -rw-r--r-- | include/configs/mx6slevk.h | 5 | ||||
| -rw-r--r-- | include/configs/mx6sxsabresd.h | 5 | ||||
| -rw-r--r-- | include/configs/mx6ul_14x14_evk.h | 227 | ||||
| -rw-r--r-- | include/configs/nitrogen6x.h | 5 | ||||
| -rw-r--r-- | include/configs/novena.h | 6 | ||||
| -rw-r--r-- | include/configs/ot1200.h | 4 | ||||
| -rw-r--r-- | include/configs/platinum.h | 4 | ||||
| -rw-r--r-- | include/configs/tbs2910.h | 6 | ||||
| -rw-r--r-- | include/configs/tqma6.h | 6 | ||||
| -rw-r--r-- | include/configs/tqma6_wru4.h | 71 | ||||
| -rw-r--r-- | include/configs/wandboard.h | 5 | ||||
| -rw-r--r-- | include/configs/warp.h | 13 |
24 files changed, 475 insertions, 136 deletions
diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h index dd012f1c3e..4a5d4fb080 100644 --- a/include/configs/aristainetos-common.h +++ b/include/configs/aristainetos-common.h @@ -26,9 +26,6 @@ #define CONFIG_MXC_UART -#define CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP - /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index dd06c05b8e..fb5b82ee33 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -32,36 +32,116 @@ /* Miscellaneous commands */ #define CONFIG_CMD_BMODE -#define CONFIG_DEFAULT_FDT_FILE "imx6q-congatec.dtb" +/* Thermal support */ +#define CONFIG_IMX6_THERMAL + +#define CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) +#define CONFIG_MXC_OCOTP +#endif + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_SPEED 100000 + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */ +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP + +/* Framebuffer */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#ifdef CONFIG_MX6DL +#define CONFIG_IPUV3_CLK 198000000 +#else +#define CONFIG_IPUV3_CLK 264000000 +#endif +#define CONFIG_IMX_HDMI + +/* SATA */ +#define CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA + +/* Command definition */ + +#define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_CONSOLE_DEV "ttymxc1" +#define CONFIG_MMCROOT "/dev/mmcblk0p2" +#define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ - "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "boot_dir=/boot\0" \ - "console=ttymxc1\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_addr=0x18000000\0" \ + "fdtfile=imx6q-qmx6.dtb\0" \ + "fdt_addr_r=0x18000000\0" \ "boot_fdt=try\0" \ - "mmcdev=1\0" \ + "ip_dyn=yes\0" \ + "console=" CONFIG_CONSOLE_DEV "\0" \ + "bootm_size=0x10000000\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ - "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ - "${boot_dir}/${image}\0" \ - "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \ - "${boot_dir}/${fdt_file}\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ + "bootz ${loadaddr} - ${fdt_addr_r}; " \ "else " \ "if test ${boot_fdt} = try; then " \ "bootz; " \ @@ -71,27 +151,44 @@ "fi; " \ "else " \ "bootz; " \ - "fi;\0" + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \ + "bootz ${loadaddr} - ${fdt_addr_r}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else "\ - "echo ERR: Fail to boot from mmc; " \ - "fi; " \ - "fi; " \ - "else echo ERR: Fail to boot from mmc; fi" - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "CGT-QMX6-Quad U-Boot > " - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + "mmc dev ${mmcdev};" \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 231f4ba33d..bbd9f38749 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -50,7 +50,6 @@ sizeof(CONFIG_SYS_PROMPT) + 16) /* SPI flash */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 25000000 @@ -163,14 +162,6 @@ /* SPI */ #define CONFIG_SPI #define CONFIG_MXC_SPI -#define CONFIG_SPI_FLASH_ATMEL -#define CONFIG_SPI_FLASH_EON -#define CONFIG_SPI_FLASH_GIGADEVICE -#define CONFIG_SPI_FLASH_MACRONIX -#define CONFIG_SPI_FLASH_SPANSION -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_WINBOND /* NAND */ #ifndef CONFIG_SPL_BUILD @@ -199,20 +190,13 @@ #define CONFIG_NET_RETRY_COUNT 5 /* USB */ -#define CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 -#define CONFIG_USB_STORAGE #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ -#define CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP #define CONFIG_SYS_STDIO_DEREGISTER /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ @@ -258,7 +242,6 @@ #define CONFIG_VIDEO_IPUV3 #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP #define CONFIG_CFB_CONSOLE #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_SYS_CONSOLE_IS_IN_ENV diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index cba58aa70f..12744a6143 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -29,11 +29,6 @@ #define CONFIG_MXC_UART -#define CONFIG_CMD_FUSE -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif - /* I2C Configs */ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 2cbd5e0aff..7c90812dbf 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -165,11 +165,6 @@ #define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */ #define CONFIG_CMD_UBI #define CONFIG_RBTREE -#define CONFIG_CMD_FUSE /* eFUSE read/write support */ -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif - /* Ethernet support */ #define CONFIG_FEC_MXC diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 21c5dce097..0a585b700b 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -61,7 +61,7 @@ #define CONFIG_SPL_LIBDISK_SUPPORT #endif -#if defined(CONFIG_MX6SX) +#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) #define CONFIG_SPL_BSS_START_ADDR 0x88200000 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ #define CONFIG_SYS_SPL_MALLOC_START 0x88300000 diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 53f725d14e..ad2629da72 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -43,6 +43,7 @@ #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION @@ -113,11 +114,11 @@ "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \ "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 86d7b16777..ef4cb68e8d 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -17,11 +17,11 @@ #ifndef __MX6_COMMON_H #define __MX6_COMMON_H +#ifndef CONFIG_MX6UL #define CONFIG_ARM_ERRATA_743622 #define CONFIG_ARM_ERRATA_751472 #define CONFIG_ARM_ERRATA_794072 #define CONFIG_ARM_ERRATA_761320 -#define CONFIG_BOARD_POSTCLK_INIT #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 @@ -29,6 +29,8 @@ #endif #define CONFIG_MP +#endif +#define CONFIG_BOARD_POSTCLK_INIT #define CONFIG_MXC_GPT_HCLK #define CONFIG_SYS_NO_FLASH @@ -52,7 +54,7 @@ #define CONFIG_REVISION_TAG /* Boot options */ -#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL)) +#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6UL)) #define CONFIG_LOADADDR 0x82000000 #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x87800000 @@ -111,4 +113,8 @@ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC +/* Fuses */ +#define CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP + #endif diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 3d5bba75d3..634a09f349 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -20,8 +20,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_UART -#define CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 22603442d7..11cf538b0a 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -12,11 +12,6 @@ #define CONFIG_MACH_TYPE 3529 #define CONFIG_MXC_UART_BASE UART4_BASE #define CONFIG_CONSOLE_DEV "ttymxc3" -#if defined CONFIG_MX6Q -#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabreauto.dtb" -#elif defined CONFIG_MX6DL -#define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabreauto.dtb" -#endif #define CONFIG_MMCROOT "/dev/mmcblk0p2" #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 47a37f4d3a..6a57841f5f 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -21,11 +21,6 @@ #define CONFIG_MXC_UART -#define CONFIG_CMD_FUSE -#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) -#define CONFIG_MXC_OCOTP -#endif - /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -75,10 +70,12 @@ #define EMMC_ENV "" #endif +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ - "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_file=undefined\0" \ "fdt_addr=0x18000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ @@ -148,9 +145,26 @@ "fi; " \ "else " \ "bootz; " \ - "fi;\0" + "fi;\0" \ + "findfdt="\ + "if test $fdt_file = undefined; then " \ + "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \ + "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \ + "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \ + "setenv fdt_file imx6q-sabreauto.dtb; fi; " \ + "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \ + "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \ + "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \ + "setenv fdt_file imx6q-sabresd.dtb; fi; " \ + "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \ + "setenv fdt_file imx6dl-sabresd.dtb; fi; " \ + "if test $fdt_file = undefined; then " \ + "echo WARNING: Could not determine dtb to use; fi; " \ + "fi;\0" \ + #define CONFIG_BOOTCOMMAND \ + "run findfdt;" \ "mmc dev ${mmcdev};" \ "if mmc rescan; then " \ "if run loadbootscript; then " \ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 41162ca202..5f635ca6c5 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -19,11 +19,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONSOLE_DEV "ttymxc0" #define CONFIG_MMCROOT "/dev/mmcblk1p2" -#if defined(CONFIG_MX6Q) -#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb" -#elif defined(CONFIG_MX6DL) -#define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabresd.dtb" -#endif #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index a7da111ee9..3cecd94039 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -192,9 +192,4 @@ #define CONFIG_IMX6_THERMAL -#define CONFIG_CMD_FUSE -#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) -#define CONFIG_MXC_OCOTP -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 2b278a8ab4..848bdcd674 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -178,11 +178,6 @@ #define CONFIG_IMX6_THERMAL -#define CONFIG_CMD_FUSE -#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) -#define CONFIG_MXC_OCOTP -#endif - #define CONFIG_CMD_TIME #define CONFIG_FSL_QSPI diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h new file mode 100644 index 0000000000..436b0227b9 --- /dev/null +++ b/include/configs/mx6ul_14x14_evk.h @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX6UL 14x14 EVK board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __MX6UL_14X14_EVK_CONFIG_H +#define __MX6UL_14X14_EVK_CONFIG_H + + +#include <asm/arch/imx-regs.h> +#include <linux/sizes.h> +#include "mx6_common.h" +#include <asm/imx-common/gpio.h> + +/* SPL options */ +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#include "imx6_spl.h" + +#define CONFIG_MX6 +#define CONFIG_ROM_UNIFIED_SECTIONS +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + +/* MMC Configs */ +#ifdef CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR + +/* NAND pin conflicts with usdhc2 */ +#ifdef CONFIG_NAND_MXS +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#else +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#endif + +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ +#endif + +#undef CONFIG_BOOTM_NETBSD +#undef CONFIG_BOOTM_PLAN9 +#undef CONFIG_BOOTM_RTEMS + +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV + +/* I2C configs */ +#define CONFIG_CMD_I2C +#ifdef CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +#define PHYS_SDRAM_SIZE SZ_512M + +#undef CONFIG_CMD_IMLS + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=imx6ul-14x14-evk.dtb\0" \ + "fdt_addr=0x83000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_PROMPT "=> " +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (8 * SZ_64K) +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_BMODE + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#define CONFIG_FSL_QSPI +#ifdef CONFIG_FSL_QSPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 40000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define FSL_QSPI_FLASH_NUM 1 +#define FSL_QSPI_FLASH_SIZE SZ_32M +#endif + +/* USB Configs */ +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif + +#define CONFIG_IMX6_THERMAL + +#endif diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 3bb2e8f870..dd4cb0f893 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -26,11 +26,6 @@ #define CONFIG_USB_ETH_CDC #define CONFIG_NETCONSOLE -#define CONFIG_CMD_FUSE -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif - #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE diff --git a/include/configs/novena.h b/include/configs/novena.h index d9b7250cad..0970fd7548 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -25,7 +25,6 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_FAT_WRITE -#define CONFIG_CMD_FUSE #define CONFIG_CMD_MII #define CONFIG_CMD_PCI #define CONFIG_CMD_PING @@ -118,11 +117,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 2 -/* OCOTP Configs */ -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif - /* PCI express */ #ifdef CONFIG_CMD_PCI #define CONFIG_PCI diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index fb58acf508..0d06fce1eb 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -16,10 +16,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R -/* FUSE Configs */ -#define CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP - /* UART Configs */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE diff --git a/include/configs/platinum.h b/include/configs/platinum.h index fd1946160a..d65143240b 100644 --- a/include/configs/platinum.h +++ b/include/configs/platinum.h @@ -23,7 +23,6 @@ #define CONFIG_CMD_BMODE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_FUSE #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_MTDPARTS @@ -103,9 +102,6 @@ #define CONFIG_APBH_DMA_BURST #define CONFIG_APBH_DMA_BURST8 -/* Fuse support */ -#define CONFIG_MXC_OCOTP - /* Environment in NAND */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET (16 << 20) diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 397c95cbab..14985f859d 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -173,12 +173,6 @@ #define CONFIG_I2C_EDID #endif -/* Fuses */ -#define CONFIG_CMD_FUSE -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif - /* Environment organization */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 2 diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index e0c4ada711..f7fade12f1 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -100,10 +100,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ -/* Fuses */ -#define CONFIG_MXC_OCOTP -#define CONFIG_CMD_FUSE - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII @@ -393,6 +389,8 @@ */ #ifdef CONFIG_MBA6 #include "tqma6_mba6.h" +#elif CONFIG_WRU4 +#include "tqma6_wru4.h" #else #error "No baseboard for the TQMa6 defined!" #endif diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h new file mode 100644 index 0000000000..1c86bc0701 --- /dev/null +++ b/include/configs/tqma6_wru4.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2015 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_TQMA6_WRU4_H +#define __CONFIG_TQMA6_WRU4_H + +#define CONFIG_DEFAULT_FDT_FILE "imx6s-wru4.dtb" + +/* DTT sensors */ +#define CONFIG_DTT_SENSORS { 0, 1 } +#define CONFIG_SYS_DTT_BUS_NUM 2 + +/* Ethernet */ +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0x01 +#define CONFIG_PHY_SMSC + +/* UART */ +#define CONFIG_MXC_UART_BASE UART4_BASE +#define CONFIG_CONSOLE_DEV "ttymxc3" + +#define CONFIG_MISC_INIT_R + +/* Watchdog */ +#define CONFIG_HW_WATCHDOG +#define CONFIG_IMX_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000 + +/* Config on-board RTC */ +#define CONFIG_RTC_DS1337 +#define CONFIG_SYS_RTC_BUS_NUM 2 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +/* Turn off RTC square-wave output to save battery */ +#define CONFIG_SYS_RTC_DS1337_NOOSC +#define CONFIG_CMD_DATE + +#define CONFIG_CMD_GPIO + +/* LED */ +#define CONFIG_CMD_LED +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define STATUS_LED_BIT 0 +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT1 1 +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT2 2 +#define STATUS_LED_STATE2 STATUS_LED_ON +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT3 3 +#define STATUS_LED_STATE3 STATUS_LED_ON +#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT4 4 +#define STATUS_LED_STATE4 STATUS_LED_ON +#define STATUS_LED_PERIOD4 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT5 5 +#define STATUS_LED_STATE5 STATUS_LED_ON +#define STATUS_LED_PERIOD5 (CONFIG_SYS_HZ / 2) + +/* Bootcounter */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_BOOTCOUNT_BE + +#endif /* __CONFIG_TQMA6_WRU4_H */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index f05b55a0e2..f4e9cf20c5 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -84,11 +84,6 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_CMD_FUSE -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif - #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ diff --git a/include/configs/warp.h b/include/configs/warp.h index 5a9bb33840..fa102bbae7 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -94,9 +94,16 @@ #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 -/* Fuses */ -#define CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX77696 #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ |
