diff options
Diffstat (limited to 'include/configs')
34 files changed, 194 insertions, 55 deletions
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 4407b454dd..ad4cbd88b8 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -329,6 +329,7 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index d5e6c4b0dc..823cba6ff4 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -32,11 +32,15 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_MULTI_EEPROMS +/* Power */ +#define CONFIG_POWER_TPS65218 + /* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350 #define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* Enabling L2 Cache */ @@ -48,15 +52,24 @@ * Since SPL did pll and ddr initialization for us, * we don't need to do it twice. */ -#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) +#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT) #define CONFIG_SKIP_LOWLEVEL_INIT #endif +/* + * When building U-Boot such that there is no previous loader + * we need to call board_early_init_f. This is taken care of in + * s_init when we have SPL used. + */ +#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) +#define CONFIG_BOARD_EARLY_INIT_F +#endif + /* Now bring in the rest of the common code. */ #include <configs/ti_armv7_common.h> -/* Always 128 KiB env size */ -#define CONFIG_ENV_SIZE (128 << 10) +/* Always 64 KiB env size */ +#define CONFIG_ENV_SIZE (64 << 10) #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -86,6 +99,30 @@ #define CONFIG_OMAP_USB_PHY #define CONFIG_AM437X_USB2PHY2_HOST +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_TEXT_BASE 0x30000000 +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ +#define CONFIG_ENV_OFFSET 0x110000 +#define CONFIG_ENV_OFFSET_REDUND 0x120000 +#ifdef MTDIDS_DEFAULT +#undef MTDIDS_DEFAULT +#endif +#ifdef MTDPARTS_DEFAULT +#undef MTDPARTS_DEFAULT +#endif +#define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \ + "512k(QSPI.u-boot.backup)," \ + "512k(QSPI.u-boot-spl-os)," \ + "64k(QSPI.u-boot-env)," \ + "64k(QSPI.u-boot-env.backup)," \ + "8m(QSPI.kernel)," \ + "-(QSPI.file-system)" +#endif + /* SPI */ #undef CONFIG_OMAP3_SPI #define CONFIG_TI_QSPI @@ -94,6 +131,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_TI_SPI_MMAP +#define CONFIG_SPI_FLASH_BAR #define CONFIG_QSPI_SEL_GPIO 48 #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 @@ -145,6 +183,7 @@ "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=mmc dev ${mmcdev}; " \ "setenv devnum ${mmcdev}; " \ + "setenv devtype mmc; " \ "if mmc rescan; then " \ "echo SD/MMC found on device ${devnum};" \ "if run loadbootenv; then " \ diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 515facfd67..30ecd45584 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -224,8 +224,8 @@ /* PMIC */ #define CONFIG_PMIC -#define CONFIG_PMIC_I2C -#define CONFIG_PMIC_MAX77686 +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX77686 #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 9ff089e67c..ae83112798 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -76,6 +76,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -87,6 +88,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 7adc8c0fd7..5a37536b0a 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -12,6 +12,8 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_AM33XX #define CONFIG_OMAP #define CONFIG_OMAP_COMMON @@ -94,7 +96,7 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP24XX - +#define CONFIG_CMD_I2C /* GPIO */ #define CONFIG_OMAP_GPIO #define CONFIG_CMD_GPIO diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 26b615b8c5..4d1dd28a91 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -141,7 +141,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 #define CONFIG_CMD_NAND -#define GPMC_NAND_ECC_LP_x8_LAYOUT #define MTDIDS_DEFAULT "nand0=nand" #define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl)," \ "1m(u-boot),1m(u-boot-env)," \ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index aae05e0333..8c60e22c1d 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -158,7 +158,6 @@ /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define GPMC_NAND_ECC_LP_x8_LAYOUT /* Environment information */ #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 16a00ebe86..5308790fe6 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -314,6 +314,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/dig297.h b/include/configs/dig297.h index af6f56bb34..ce205e9b3e 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -138,6 +138,7 @@ * Board NAND Info. */ #define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h index cbd2d204cf..44e6ab4ef3 100644 --- a/include/configs/exynos4-dt.h +++ b/include/configs/exynos4-dt.h @@ -20,6 +20,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_BOARD_COMMON +#define CONFIG_SYS_GENERIC_BOARD /* Enable fdt support */ #define CONFIG_OF_CONTROL @@ -44,6 +45,9 @@ #define CONFIG_S5P_SDHCI #define CONFIG_SDHCI #define CONFIG_MMC_SDMA +#define CONFIG_DWMMC +#define CONFIG_EXYNOS_DWMMC +#define CONFIG_BOUNCE_BUFFER #define CONFIG_MMC_DEFAULT_DEV 0 /* PWM */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index 5a9b1b42d3..b8304951d2 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -259,6 +259,7 @@ /* PMIC */ #define CONFIG_POWER #define CONFIG_POWER_I2C +#define CONFIG_POWER_TPS65090 /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index b7ff47236b..9d1d56a53b 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -45,7 +45,7 @@ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK /* PMIC */ -#define CONFIG_PMIC_MAX77686 +#define CONFIG_POWER_MAX77686 /* Sound */ #define CONFIG_CMD_SOUND diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index 6255750c3b..0b9e5b699f 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -63,6 +63,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -74,6 +75,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index dde73298fc..6ba7e62e55 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -71,7 +71,8 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 K2HK_UART0_BASE +#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE #define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6) #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 @@ -130,6 +131,7 @@ /* NAND Configuration */ #define CONFIG_NAND_DAVINCI +#define CONFIG_CMD_NAND_ECCLAYOUT #define CONFIG_SYS_NAND_CS 2 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index aff2419f85..d464ad964b 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -107,7 +107,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC34704 +#define CONFIG_POWER_FSL_MC34704 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54 #define CONFIG_DOS_PARTITION diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 0a46f4c305..ab481441b2 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -52,7 +52,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 #define CONFIG_RTC_MC13XXX diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 5bbae8cf7d..fb2072d2f0 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -47,7 +47,7 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_RTC_MC13XXX /* MMC Configs */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 12d79b4559..a74508c5e8 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -82,7 +82,7 @@ #define CONFIG_POWER_I2C #define CONFIG_DIALOG_POWER #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 0a7df60f28..c02348354a 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -295,6 +295,7 @@ #define CONFIG_SPL_OMAP3_ID_NAND /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 7f3424b4f0..ae4ce63f67 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -120,7 +120,7 @@ /* Max number of NAND devices */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 - +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 /* Timeout values (in ticks) */ #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index d56d5b00cc..79daabd6bb 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -187,6 +187,7 @@ /* NAND boot config */ #ifdef CONFIG_NAND +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 0d03c75ce3..8dcbba3c40 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -141,6 +141,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 7b97be9ace..1a13633949 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -206,6 +206,7 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 7c5540ff66..3efe4cf815 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -98,6 +98,7 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 /* Environment information */ diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index fc25966e0f..85104057a9 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -149,7 +149,6 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define GPMC_NAND_ECC_LP_x8_LAYOUT 1 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ "128k(SPL.backup1)," \ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 799d4fe9d8..fce1716783 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -17,6 +17,7 @@ #define CONFIG_S5PC110 1 /* which is in a S5PC110 */ #define CONFIG_MACH_GONI 1 /* working with Goni */ +#include <linux/sizes.h> #include <asm/arch/cpu.h> /* get chip and board defs */ #define CONFIG_ARCH_CPU_INIT @@ -38,11 +39,9 @@ #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING -/* - * Size of malloc() pool - * 1MB = 0x100000, 0x100000 = 1024 * 1024 - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +/* Size of malloc() pool.*/ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M) + /* * select serial console configuration */ @@ -72,14 +71,19 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ONENAND -#define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_MMC +#define CONFIG_CMD_DFU +#define CONFIG_CMD_GPT -#define CONFIG_BOOTDELAY 1 -#define CONFIG_ZERO_BOOTDELAY_CHECK +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS +/* USB Samsung's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_MANUFACTURER "Samsung" /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ #define MTDIDS_DEFAULT "onenand0=samsung-onenand" @@ -90,30 +94,52 @@ ",7m(kernel)"\ ",1m(log)"\ ",12m(modem)"\ - ",60m(qboot)"\ - ",-(UBI)\0" + ",60m(qboot)\0" -#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_BOOTCOMMAND "run ubifsboot" +/* partitions definitions */ +#define PARTS_CSA "csa-mmc" +#define PARTS_BOOTLOADER "u-boot" +#define PARTS_BOOT "boot" +#define PARTS_ROOT "platform" +#define PARTS_DATA "data" +#define PARTS_CSC "csc" +#define PARTS_UMS "ums" + +#define CONFIG_DFU_ALT \ + "u-boot raw 0x80 0x400;" \ + "uImage ext4 0 2;" \ + "exynos3-goni.dtb ext4 0 2;" \ + ""PARTS_ROOT" part 0 5\0" + +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ + "name="PARTS_BOOTLOADER",size=60MiB," \ + "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \ + "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ + "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ + "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ + "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ + "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ + +#define CONFIG_BOOTCOMMAND "run mmcboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" -#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \ " ${console} ${meminfo}" #define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" -#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \ - " rootfstype=cramfs " CONFIG_COMMON_BOOT +#define CONFIG_BOOTARGS "root=/dev/mtdblock8 rootfstype=ext4 " \ + CONFIG_COMMON_BOOT #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ " onenand write 0x32008000 0x0 0x100000\0" -#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6" - -#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc" - #define CONFIG_MISC_COMMON #define CONFIG_MISC_INIT_R @@ -130,42 +156,44 @@ "onenand erase 0x01560000 0x1eaa0000;" \ "onenand write 0x32000000 0x1260000 0x8C0000\0" \ "bootk=" \ - "onenand read 0x30007FC0 0xc00000 0x600000;" \ + "run loaduimage;" \ "bootm 0x30007FC0\0" \ "flashboot=" \ "set bootargs root=/dev/mtdblock${bootblock} " \ - "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \ + "rootfstype=${rootfstype} ${opts} " \ "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \ "ubifsboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + "${opts} ${lcdinfo} " \ CONFIG_COMMON_BOOT "; run bootk\0" \ "tftpboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ - CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \ - "bootm 0x30007FC0\0" \ + "${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \ + "; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \ "ramboot=" \ "set bootargs " CONFIG_RAMDISK_BOOT \ - " initrd=0x33000000,8M ramdisk=8192\0" \ + "initrd=0x33000000,8M ramdisk=8192\0" \ "mmcboot=" \ - "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \ - CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ + "rootfstype=${rootfstype} ${opts} ${lcdinfo} " \ CONFIG_COMMON_BOOT "; run bootk\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ "verify=n\0" \ - "rootfstype=cramfs\0" \ + "rootfstype=ext4\0" \ "console=" CONFIG_DEFAULT_CONSOLE \ - "mtdparts=" MTDPARTS_DEFAULT \ "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \ - "mmcblk=/dev/mmcblk1p1\0" \ + "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \ + "mmcdev=0\0" \ + "mmcbootpart=2\0" \ + "mmcrootpart=5\0" \ + "partitions=" PARTS_DEFAULT \ "bootblock=9\0" \ "ubiblock=8\0" \ "ubi=enabled\0" \ - "opts=always_resume=1" + "opts=always_resume=1\0" \ + "dfu_alt_info=" CONFIG_DFU_ALT "\0" -/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "Goni # " @@ -202,6 +230,18 @@ #define CONFIG_DOS_PARTITION 1 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE + +/* write support for filesystems */ +#define CONFIG_FAT_WRITE +#define CONFIG_EXT4_WRITE + +/* GPT */ +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS + #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) #define CONFIG_SYS_CACHELINE_SIZE 64 @@ -226,5 +266,8 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE #endif /* __CONFIG_H */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 3522c1a07a..0c2f0f19c8 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -185,6 +185,7 @@ /* Configure the PISMO */ #define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_IS_IN_NAND #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ @@ -249,6 +250,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 #define CONFIG_SYS_NAND_OOBSIZE 64 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 9c04c23ab7..1b0fee9a80 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -137,10 +137,10 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 /* Environment information */ #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/tegra-common-ums.h b/include/configs/tegra-common-ums.h new file mode 100644 index 0000000000..7bd8960a32 --- /dev/null +++ b/include/configs/tegra-common-ums.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _TEGRA_COMMON_UMS_H_ +#define _TEGRA_COMMON_UMS_H + +#ifndef CONFIG_SPL_BUILD +/* USB gadget, and mass storage protocol */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_CI_UDC +#define CONFIG_CI_UDC_HAS_HOSTPC +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_G_DNL_VENDOR_NUM 0x0955 +#define CONFIG_G_DNL_PRODUCT_NUM 0x701A +#define CONFIG_G_DNL_MANUFACTURER "NVIDIA" +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_CMD_USB_MASS_STORAGE +#endif + +#endif /* _TEGRA_COMMON_UMS_H */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 128b66edef..80976e7e3b 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -75,6 +75,15 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif +/* + * When building U-Boot such that there is no previous loader + * we need to call board_early_init_f. This is taken care of in + * s_init when we have SPL used. + */ +#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) +#define CONFIG_BOARD_EARLY_INIT_F +#endif + #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ #endif diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 485427276a..698291852b 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -196,7 +196,8 @@ * under common/spl/. Given our generally common memory map, we set a * number of related defaults and sizes here. */ -#ifndef CONFIG_NOR_BOOT +#if !defined(CONFIG_NOR_BOOT) && \ + !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX)) #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_OS_BOOT diff --git a/include/configs/tseries.h b/include/configs/tseries.h index e550afad4f..1fd6e32baf 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -157,7 +157,6 @@ /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ #define CONFIG_NAND_OMAP_ELM #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 2d75f5013f..c4a1b94b98 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -63,6 +63,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -74,6 +75,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index 695bc230c0..259205e881 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -55,7 +55,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 #define CONFIG_RTC_MC13XXX |
