diff options
Diffstat (limited to 'include/configs/spieval.h')
| -rw-r--r-- | include/configs/spieval.h | 109 |
1 files changed, 55 insertions, 54 deletions
diff --git a/include/configs/spieval.h b/include/configs/spieval.h index fd138a5d17..4b618f36a8 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -44,11 +44,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -88,12 +83,6 @@ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ -#ifdef CONFIG_PCI -#define ADD_PCI_CMD CFG_CMD_PCI -#else -#define ADD_PCI_CMD 0 -#endif - /* * Video console */ @@ -110,12 +99,6 @@ #define CFG_CONSOLE_IS_IN_ENV #endif -#ifdef CONFIG_VIDEO -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -124,10 +107,7 @@ /* USB */ #ifdef CONFIG_STK52XX #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif /* POST support */ @@ -136,43 +116,60 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif -/* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) -#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) -#else -#define ADD_IDE_CMD 0 -#endif /* - * Supported commands + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) + #define CONFIG_CMD_IDE + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_STK52XX + #define CONFIG_CMD_USB + #define CONFIG_CMD_FAT +#endif + +#ifdef CONFIG_VIDEO + #define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_PCI + #define CONFIG_CMD_PCI +#endif + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -226,7 +223,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ @@ -406,7 +403,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -425,9 +422,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW |
