diff options
Diffstat (limited to 'include/configs/omap3_beagle.h')
| -rw-r--r-- | include/configs/omap3_beagle.h | 45 |
1 files changed, 32 insertions, 13 deletions
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 7958ca5445..c1245e7b84 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -19,6 +19,7 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -134,7 +135,7 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_FS_GENERIC /* Generic FS support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nand0=nand" @@ -187,13 +188,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ /* Environment information */ #define CONFIG_BOOTDELAY 3 @@ -201,8 +195,13 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "rdaddr=0x81000000\0" \ + "fdt_high=0xffffffff\0" \ + "fdtaddr=0x80f80000\0" \ "usbtty=cdc_acm\0" \ - "bootfile=uImage.beagle\0" \ + "bootfile=uImage\0" \ + "ramdisk=ramdisk.gz\0" \ + "bootdir=/boot\0" \ + "bootpart=0:2\0" \ "console=ttyO2,115200n8\0" \ "mpurate=auto\0" \ "buddy=none\0" \ @@ -238,6 +237,17 @@ "omapdss.def_disp=${defaultdisplay} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ + "findfdt=" \ + "if test $beaglerev = AxBx; then " \ + "setenv fdtfile omap3-beagle.dtb; fi; " \ + "if test $beaglerev = Cx; then " \ + "setenv fdtfile omap3-beagle.dtb; fi; " \ + "if test $beaglerev = xMAB; then " \ + "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ + "if test $beaglerev = xMC; then " \ + "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ + "if test $fdtfile = undefined; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" \ "bootenv=uEnv.txt\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ @@ -251,12 +261,15 @@ "omapdss.def_disp=${defaultdisplay} " \ "root=${ramroot} " \ "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \ + "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ + "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ + "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ "nand read ${loadaddr} 280000 400000; " \ @@ -270,6 +283,7 @@ "userbutton_nonxm=gpio input 7;\0" /* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */ #define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run userbutton; then " \ "setenv bootenv uEnv.txt;" \ @@ -285,11 +299,16 @@ "echo Running uenvcmd ...;" \ "run uenvcmd;" \ "fi;" \ - "if run loaduimage; then " \ + "if run loadimage; then " \ "run mmcboot;" \ "fi;" \ "fi;" \ "run nandboot;" \ + "setenv bootfile zImage;" \ + "if run loadimage; then " \ + "run loadfdt;" \ + "run mmcbootz; " \ + "fi; " \ #define CONFIG_AUTO_COMPLETE 1 /* |
