diff options
Diffstat (limited to 'include/configs/ls1021atwr.h')
| -rw-r--r-- | include/configs/ls1021atwr.h | 36 |
1 files changed, 24 insertions, 12 deletions
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 784331ff8e..fdbbfc1196 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -11,7 +11,7 @@ #define CONFIG_ARMV7_PSCI -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -109,7 +109,13 @@ #endif #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg +#ifdef CONFIG_SD_BOOT_QSPI +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg +#else +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg +#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT @@ -139,6 +145,9 @@ #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x40010000 +#endif + +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_NO_FLASH #endif @@ -165,7 +174,7 @@ /* * IFC Definitions */ -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -280,7 +289,6 @@ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ /* EEPROM */ -#ifndef CONFIG_SD_BOOT #define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 1 @@ -288,7 +296,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#endif /* * MMC @@ -302,7 +309,7 @@ #define CONFIG_DOS_PARTITION /* SPI */ -#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) /* QSPI */ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 @@ -412,10 +419,14 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#undef CONFIG_CMD_IMLS +#endif + #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN -#define CONFIG_LS102XA_NS_ACCESS +#define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define CONFIG_TIMER_CLK_FREQ 12500000 @@ -429,13 +440,13 @@ #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ - "initrd_high=0xcfffffff\0" \ - "fdt_high=0xcfffffff\0" + "initrd_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" #else #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ - "initrd_high=0xcfffffff\0" \ - "fdt_high=0xcfffffff\0" + "initrd_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" #endif /* @@ -478,7 +489,7 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif -#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 +#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 /* * Environment @@ -504,6 +515,7 @@ #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS #define CONFIG_CMD_BOOTZ #define CONFIG_MISC_INIT_R |
