diff options
Diffstat (limited to 'include/configs/bur_am335x_common.h')
| -rw-r--r-- | include/configs/bur_am335x_common.h | 57 |
1 files changed, 2 insertions, 55 deletions
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 8429cf511a..a94b1e2711 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -3,7 +3,7 @@ * * common parts used by B&R AM335x based boards * - * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> - + * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> - * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com * * SPDX-License-Identifier: GPL-2.0+ @@ -12,24 +12,9 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ -#define BUR_COMMON_ENV \ -"usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \ -"brdefaultip=if test -r ${ipaddr}; then; else" \ -" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \ -" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \ -"netconsole=echo switching to network console ...; " \ -"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \ -"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \ -"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ -"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" - -#define CONFIG_PREBOOT "run brdefaultip" - - #define CONFIG_AM33XX #define CONFIG_OMAP #define CONFIG_OMAP_COMMON -#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ @@ -52,17 +37,11 @@ #define CONFIG_BAUDRATE 115200 /* Network defines */ -#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 2 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ #define CONFIG_PHYLIB #define CONFIG_PHY_NATSEMI -/* Network console */ -#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ + /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and @@ -103,38 +82,6 @@ #define CONFIG_SYS_I2C_OMAP24XX /* GPIO */ #define CONFIG_OMAP_GPIO -/* - * ---------------------------------------------------------------------------- - * The following are general good-enough settings for U-Boot. We set a - * large malloc pool as we generally have a lot of DDR, and we opt for - * function over binary size in the main portion of U-Boot as this is - * generally easily constrained later if needed. We enable the config - * options that give us information in the environment about what board - * we are on so we do not need to rely on the command prompt. We set a - * console baudrate of 115200 and use the default baud rate table. - */ -#define CONFIG_SYS_MALLOC_LEN (5120 << 10) -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE - -/* As stated above, the following choices are optional. */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE - -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* * Our platforms make use of SPL to initalize the hardware (primarily |
