diff options
Diffstat (limited to 'include/configs/CRAYL1.h')
| -rw-r--r-- | include/configs/CRAYL1.h | 228 |
1 files changed, 0 insertions, 228 deletions
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h deleted file mode 100644 index 788fa0f91c..0000000000 --- a/include/configs/CRAYL1.h +++ /dev/null @@ -1,228 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * David Updegraff, Cray, Inc. dave@cray.com: our 405 is walnut-lite.. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_CRAYL1 -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405 CPU */ - -/* - * Note: I make an "image" from U-Boot itself, which prefixes 0x40 - * bytes of header info, hence start address is thus shifted. - */ -#define CONFIG_SYS_TEXT_BASE 0xFFFD0040 - -#define CONFIG_SYS_CLK_FREQ 25000000 -#define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 1 /* PHY address; handling of ENET */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* early setup for 405gp */ -#define CONFIG_MISC_INIT_R 1 /* so that a misc_init_r() is called */ - -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -/* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to - * keep possible initrd ramdisk decompression out. This is in k (1024 bytes) - #define CONFIG_PRAM 16 - */ -#define CONFIG_LOADADDR 0x100000 /* where TFTP images go */ -#undef CONFIG_BOOTARGS - -/* Bootcmd is overridden by the bootscript in board/cray/L1 - */ -#define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_BOOTCOMMAND "dhcp" - -/* - * ..during experiments.. - #define CONFIG_SERVERIP 10.0.0.1 - #define CONFIG_ETHADDR 00:40:a6:80:14:5 - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SDRAM_BANK0 1 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_IDENT_STRING "Cray L1" -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SOURCE 1 - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMI -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SETGETDCR -#define CONFIG_CMD_SOURCE - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_VENDOREX -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * how many time to fail & restart a net-TFTP before giving up & resetting - * the board hoping that a reset of net interface might help.. - */ -#define CONFIG_NET_RESET 5 - -/* - * bauds. Just to make it compile; in our case, I read the base_baud - * from the DCR anyway, so its kinda-tied to the above ref. clock which in turn - * drives the system clock. - */ -#define CONFIG_SYS_BASE_BAUD 403225 -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* where to load what we get from TFTP */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_DRAM_TEST 1 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector */ -#define CONFIG_ENV_OFFSET 0x3c8000 -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment area */ -#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */ - -/* Memory tests: U-BOOT relocates itself to the top of Ram, so its at - * 32meg-(128k+some_malloc_space+copy-of-ENV sector).. - */ -#define CONFIG_SYS_SDRAM_SIZE 32 /* megs of ram */ -#define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */ - /* the exception vector table */ - /* to the end of the DRAM */ - /* less monitor and malloc area */ -#define CONFIG_SYS_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* 128k for malloc space */ -#define CONFIG_SYS_MEM_END_USAGE ( CONFIG_SYS_MONITOR_LEN \ - + CONFIG_SYS_MALLOC_LEN \ - + CONFIG_ENV_SECT_SIZE \ - + CONFIG_SYS_STACK_USAGE ) - -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 - CONFIG_SYS_MEM_END_USAGE) -/* END ENVIRONNEMENT FLASH */ - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ - - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in OnChipMem ) - */ -#if 1 -/* On Chip Memory location */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else -#define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of On Chip SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#endif - -/*----------------------------------------------------------------------- - * Definitions for Serial Presence Detect EEPROM address - */ -#define EEPROM_WRITE_ADDRESS 0xA0 -#define EEPROM_READ_ADDRESS 0xA1 - -#endif /* __CONFIG_H */ |
