diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/serial/Makefile | 5 | ||||
| -rw-r--r-- | drivers/serial/serial_pl01x.c | 300 | ||||
| -rw-r--r-- | drivers/serial/serial_pl01x_internal.h (renamed from drivers/serial/serial_pl01x.h) | 0 |
3 files changed, 165 insertions, 140 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index b4f299bb0e..17c56ea66e 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -7,8 +7,11 @@ ifdef CONFIG_DM_SERIAL obj-y += serial-uclass.o +obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o else obj-y += serial.o +obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o +obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o endif @@ -25,8 +28,6 @@ obj-$(CONFIG_IMX_SERIAL) += serial_imx.o obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o obj-$(CONFIG_MXC_UART) += serial_mxc.o -obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o -obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o obj-$(CONFIG_SA1100_SERIAL) += serial_sa1100.o obj-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index dfb610e1a9..665a0e48b1 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -12,125 +12,86 @@ /* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */ #include <common.h> +#include <errno.h> #include <watchdog.h> #include <asm/io.h> #include <serial.h> +#include <serial_pl01x.h> #include <linux/compiler.h> -#include "serial_pl01x.h" +#include "serial_pl01x_internal.h" -/* - * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 - * Integrator CP has two UARTs, use the first one, at 38400-8-N-1 - * Versatile PB has four UARTs. - */ -#define CONSOLE_PORT CONFIG_CONS_INDEX static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS; +static enum pl01x_type pl01x_type __attribute__ ((section(".data"))); +static struct pl01x_regs *base_regs __attribute__ ((section(".data"))); #define NUM_PORTS (sizeof(port)/sizeof(port[0])) -static void pl01x_putc (int portnum, char c); -static int pl01x_getc (int portnum); -static int pl01x_tstc (int portnum); -unsigned int baudrate = CONFIG_BAUDRATE; DECLARE_GLOBAL_DATA_PTR; -static struct pl01x_regs *pl01x_get_regs(int portnum) +static int pl01x_putc(struct pl01x_regs *regs, char c) { - return (struct pl01x_regs *) port[portnum]; -} - -#ifdef CONFIG_PL010_SERIAL - -static int pl01x_serial_init(void) -{ - struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); - unsigned int divisor; - - /* First, disable everything */ - writel(0, ®s->pl010_cr); + /* Wait until there is space in the FIFO */ + if (readl(®s->fr) & UART_PL01x_FR_TXFF) + return -EAGAIN; - /* Set baud rate */ - switch (baudrate) { - case 9600: - divisor = UART_PL010_BAUD_9600; - break; + /* Send the character */ + writel(c, ®s->dr); - case 19200: - divisor = UART_PL010_BAUD_9600; - break; + return 0; +} - case 38400: - divisor = UART_PL010_BAUD_38400; - break; +static int pl01x_getc(struct pl01x_regs *regs) +{ + unsigned int data; - case 57600: - divisor = UART_PL010_BAUD_57600; - break; + /* Wait until there is data in the FIFO */ + if (readl(®s->fr) & UART_PL01x_FR_RXFE) + return -EAGAIN; - case 115200: - divisor = UART_PL010_BAUD_115200; - break; + data = readl(®s->dr); - default: - divisor = UART_PL010_BAUD_38400; + /* Check for an error flag */ + if (data & 0xFFFFFF00) { + /* Clear the error */ + writel(0xFFFFFFFF, ®s->ecr); + return -1; } - writel((divisor & 0xf00) >> 8, ®s->pl010_lcrm); - writel(divisor & 0xff, ®s->pl010_lcrl); - - /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ - writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, ®s->pl010_lcrh); - - /* Finally, enable the UART */ - writel(UART_PL010_CR_UARTEN, ®s->pl010_cr); - - return 0; + return (int) data; } -#endif /* CONFIG_PL010_SERIAL */ - -#ifdef CONFIG_PL011_SERIAL +static int pl01x_tstc(struct pl01x_regs *regs) +{ + WATCHDOG_RESET(); + return !(readl(®s->fr) & UART_PL01x_FR_RXFE); +} -static int pl01x_serial_init(void) +static int pl01x_generic_serial_init(struct pl01x_regs *regs, + enum pl01x_type type) { - struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); - unsigned int temp; - unsigned int divider; - unsigned int remainder; - unsigned int fraction; unsigned int lcr; #ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT - /* Empty RX fifo if necessary */ - if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) { - while (!(readl(®s->fr) & UART_PL01x_FR_RXFE)) - readl(®s->dr); + if (type == TYPE_PL011) { + /* Empty RX fifo if necessary */ + if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) { + while (!(readl(®s->fr) & UART_PL01x_FR_RXFE)) + readl(®s->dr); + } } #endif /* First, disable everything */ - writel(0, ®s->pl011_cr); - - /* - * Set baud rate - * - * IBRD = UART_CLK / (16 * BAUD_RATE) - * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE)) - */ - temp = 16 * baudrate; - divider = CONFIG_PL011_CLOCK / temp; - remainder = CONFIG_PL011_CLOCK % temp; - temp = (8 * remainder) / baudrate; - fraction = (temp >> 1) + (temp & 1); - - writel(divider, ®s->pl011_ibrd); - writel(fraction, ®s->pl011_fbrd); + writel(0, ®s->pl010_cr); /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; writel(lcr, ®s->pl011_lcrh); + switch (type) { + case TYPE_PL010: + break; + case TYPE_PL011: { #ifdef CONFIG_PL011_SERIAL_RLCR - { int i; /* @@ -144,90 +105,151 @@ static int pl01x_serial_init(void) writel(lcr, ®s->pl011_rlcr); /* lcrh needs to be set again for change to be effective */ writel(lcr, ®s->pl011_lcrh); - } #endif - /* Finally, enable the UART */ - writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE | - UART_PL011_CR_RTS, ®s->pl011_cr); + break; + } + default: + return -EINVAL; + } return 0; } -#endif /* CONFIG_PL011_SERIAL */ - -static void pl01x_serial_putc(const char c) +static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, + int clock, int baudrate) { - if (c == '\n') - pl01x_putc (CONSOLE_PORT, '\r'); + switch (type) { + case TYPE_PL010: { + unsigned int divisor; + + switch (baudrate) { + case 9600: + divisor = UART_PL010_BAUD_9600; + break; + case 19200: + divisor = UART_PL010_BAUD_9600; + break; + case 38400: + divisor = UART_PL010_BAUD_38400; + break; + case 57600: + divisor = UART_PL010_BAUD_57600; + break; + case 115200: + divisor = UART_PL010_BAUD_115200; + break; + default: + divisor = UART_PL010_BAUD_38400; + } + + writel((divisor & 0xf00) >> 8, ®s->pl010_lcrm); + writel(divisor & 0xff, ®s->pl010_lcrl); + + /* Finally, enable the UART */ + writel(UART_PL010_CR_UARTEN, ®s->pl010_cr); + break; + } + case TYPE_PL011: { + unsigned int temp; + unsigned int divider; + unsigned int remainder; + unsigned int fraction; - pl01x_putc (CONSOLE_PORT, c); -} + /* + * Set baud rate + * + * IBRD = UART_CLK / (16 * BAUD_RATE) + * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) + * / (16 * BAUD_RATE)) + */ + temp = 16 * baudrate; + divider = clock / temp; + remainder = clock % temp; + temp = (8 * remainder) / baudrate; + fraction = (temp >> 1) + (temp & 1); + + writel(divider, ®s->pl011_ibrd); + writel(fraction, ®s->pl011_fbrd); + + /* Finally, enable the UART */ + writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | + UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr); + break; + } + default: + return -EINVAL; + } -static int pl01x_serial_getc(void) -{ - return pl01x_getc (CONSOLE_PORT); + return 0; } -static int pl01x_serial_tstc(void) +#ifndef CONFIG_DM_SERIAL +static void pl01x_serial_init_baud(int baudrate) { - return pl01x_tstc (CONSOLE_PORT); + int clock = 0; + +#if defined(CONFIG_PL010_SERIAL) + pl01x_type = TYPE_PL010; +#elif defined(CONFIG_PL011_SERIAL) + pl01x_type = TYPE_PL011; + clock = CONFIG_PL011_CLOCK; +#endif + base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX]; + + pl01x_generic_serial_init(base_regs, pl01x_type); + pl01x_generic_setbrg(base_regs, TYPE_PL010, clock, baudrate); } -static void pl01x_serial_setbrg(void) +/* + * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 + * Integrator CP has two UARTs, use the first one, at 38400-8-N-1 + * Versatile PB has four UARTs. + */ +int pl01x_serial_init(void) { - struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); + pl01x_serial_init_baud(CONFIG_BAUDRATE); - baudrate = gd->baudrate; - /* - * Flush FIFO and wait for non-busy before changing baudrate to avoid - * crap in console - */ - while (!(readl(®s->fr) & UART_PL01x_FR_TXFE)) - WATCHDOG_RESET(); - while (readl(®s->fr) & UART_PL01x_FR_BUSY) - WATCHDOG_RESET(); - serial_init(); + return 0; } -static void pl01x_putc (int portnum, char c) +static void pl01x_serial_putc(const char c) { - struct pl01x_regs *regs = pl01x_get_regs(portnum); - - /* Wait until there is space in the FIFO */ - while (readl(®s->fr) & UART_PL01x_FR_TXFF) - WATCHDOG_RESET(); + if (c == '\n') + while (pl01x_putc(base_regs, '\r') == -EAGAIN); - /* Send the character */ - writel(c, ®s->dr); + while (pl01x_putc(base_regs, c) == -EAGAIN); } -static int pl01x_getc (int portnum) +static int pl01x_serial_getc(void) { - struct pl01x_regs *regs = pl01x_get_regs(portnum); - unsigned int data; + while (1) { + int ch = pl01x_getc(base_regs); - /* Wait until there is data in the FIFO */ - while (readl(®s->fr) & UART_PL01x_FR_RXFE) - WATCHDOG_RESET(); + if (ch == -EAGAIN) { + WATCHDOG_RESET(); + continue; + } - data = readl(®s->dr); - - /* Check for an error flag */ - if (data & 0xFFFFFF00) { - /* Clear the error */ - writel(0xFFFFFFFF, ®s->ecr); - return -1; + return ch; } - - return (int) data; } -static int pl01x_tstc (int portnum) +static int pl01x_serial_tstc(void) { - struct pl01x_regs *regs = pl01x_get_regs(portnum); + return pl01x_tstc(base_regs); +} - WATCHDOG_RESET(); - return !(readl(®s->fr) & UART_PL01x_FR_RXFE); +static void pl01x_serial_setbrg(void) +{ + /* + * Flush FIFO and wait for non-busy before changing baudrate to avoid + * crap in console + */ + while (!(readl(&base_regs->fr) & UART_PL01x_FR_TXFE)) + WATCHDOG_RESET(); + while (readl(&base_regs->fr) & UART_PL01x_FR_BUSY) + WATCHDOG_RESET(); + pl01x_serial_init_baud(gd->baudrate); } static struct serial_device pl01x_serial_drv = { @@ -250,3 +272,5 @@ __weak struct serial_device *default_serial_console(void) { return &pl01x_serial_drv; } + +#endif /* nCONFIG_DM_SERIAL */ diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x_internal.h index 288a4f19f5..288a4f19f5 100644 --- a/drivers/serial/serial_pl01x.h +++ b/drivers/serial/serial_pl01x_internal.h |
