summaryrefslogtreecommitdiffstats
path: root/drivers/video/sunxi_display.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/sunxi_display.c')
-rw-r--r--drivers/video/sunxi_display.c27
1 files changed, 4 insertions, 23 deletions
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index 5a14785666..ced5ce5d6c 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -501,6 +501,9 @@ static void sunxi_hdmi_mode_set(const struct ctfb_res_modes *mode,
if (hdmi_mode)
sunxi_hdmi_setup_info_frames(mode);
+ /* Set input sync enable */
+ writel(SUNXI_HDMI_UNKNOWN_INPUT_SYNC, &hdmi->unknown);
+
/* Init various registers, select pll3 as clock source */
writel(SUNXI_HDMI_VIDEO_POL_TX_CLK, &hdmi->video_polarity);
writel(SUNXI_HDMI_PAD_CTRL0_RUN, &hdmi->pad_ctrl0);
@@ -556,41 +559,19 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode, char *monitor,
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
int clk_div, clk_double;
- int retries = 3;
bool hdmi_mode = strcmp(monitor, "hdmi") == 0;
-retry:
- clrbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE);
- clrbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE);
- clrbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
-
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_mode_set(mode, &clk_div, &clk_double);
sunxi_hdmi_mode_set(mode, hdmi_mode, clk_div, clk_double);
setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS);
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
-
- udelay(1000000 / mode->refresh + 500);
-
setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE);
- udelay(1000000 / mode->refresh + 500);
+ udelay(100);
setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE);
-
- udelay(1000000 / mode->refresh + 500);
-
- /*
- * Sometimes the display pipeline does not sync up properly, if
- * this happens the hdmi fifo underrun or overrun bits are set.
- */
- if (readl(&hdmi->irq) &
- (SUNXI_HDMI_IRQ_STATUS_FIFO_UF | SUNXI_HDMI_IRQ_STATUS_FIFO_OF)) {
- if (retries--)
- goto retry;
- printf("HDMI fifo under or overrun\n");
- }
}
void *video_hw_init(void)
OpenPOWER on IntegriCloud