diff options
Diffstat (limited to 'drivers/qe/uec_phy.h')
| -rw-r--r-- | drivers/qe/uec_phy.h | 307 |
1 files changed, 155 insertions, 152 deletions
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h index a82f1f5893..9bd926ddd5 100644 --- a/drivers/qe/uec_phy.h +++ b/drivers/qe/uec_phy.h @@ -4,11 +4,11 @@ * Author: Shlomi Gridish <gridish@freescale.com> * * Description: UCC ethernet driver -- PHY handling - * Driver for UEC on QE - * Based on 8260_io/fcc_enet.c + * Driver for UEC on QE + * Based on 8260_io/fcc_enet.c * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -19,37 +19,37 @@ #define MII_end ((u32)-2) #define MII_read ((u32)-1) -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 -#define UGETH_AN_TIMEOUT 2000 +#define UGETH_AN_TIMEOUT 2000 /* 1000BT control (Marvell & BCM54xx at least) */ -#define MII_1000BASETCONTROL 0x09 +#define MII_1000BASETCONTROL 0x09 #define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 #define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 /* Cicada Extended Control Register 1 */ -#define MII_CIS8201_EXT_CON1 0x17 +#define MII_CIS8201_EXT_CON1 0x17 #define MII_CIS8201_EXTCON1_INIT 0x0000 /* Cicada Interrupt Mask Register */ -#define MII_CIS8201_IMASK 0x19 -#define MII_CIS8201_IMASK_IEN 0x8000 -#define MII_CIS8201_IMASK_SPEED 0x4000 -#define MII_CIS8201_IMASK_LINK 0x2000 +#define MII_CIS8201_IMASK 0x19 +#define MII_CIS8201_IMASK_IEN 0x8000 +#define MII_CIS8201_IMASK_SPEED 0x4000 +#define MII_CIS8201_IMASK_LINK 0x2000 #define MII_CIS8201_IMASK_DUPLEX 0x1000 -#define MII_CIS8201_IMASK_MASK 0xf000 +#define MII_CIS8201_IMASK_MASK 0xf000 /* Cicada Interrupt Status Register */ -#define MII_CIS8201_ISTAT 0x1a +#define MII_CIS8201_ISTAT 0x1a #define MII_CIS8201_ISTAT_STATUS 0x8000 -#define MII_CIS8201_ISTAT_SPEED 0x4000 -#define MII_CIS8201_ISTAT_LINK 0x2000 +#define MII_CIS8201_ISTAT_SPEED 0x4000 +#define MII_CIS8201_ISTAT_LINK 0x2000 #define MII_CIS8201_ISTAT_DUPLEX 0x1000 /* Cicada Auxiliary Control/Status Register */ -#define MII_CIS8201_AUX_CONSTAT 0x1c +#define MII_CIS8201_AUX_CONSTAT 0x1c #define MII_CIS8201_AUXCONSTAT_INIT 0x0004 #define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 #define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 @@ -57,155 +57,156 @@ #define MII_CIS8201_AUXCONSTAT_100 0x0008 /* 88E1011 PHY Status Register */ -#define MII_M1011_PHY_SPEC_STATUS 0x11 -#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 -#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 -#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 -#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 -#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 -#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 - -#define MII_M1011_IEVENT 0x13 -#define MII_M1011_IEVENT_CLEAR 0x0000 - -#define MII_M1011_IMASK 0x12 -#define MII_M1011_IMASK_INIT 0x6400 -#define MII_M1011_IMASK_CLEAR 0x0000 - -#define MII_DM9161_SCR 0x10 -#define MII_DM9161_SCR_INIT 0x0610 +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 + +#define MII_M1011_IEVENT 0x13 +#define MII_M1011_IEVENT_CLEAR 0x0000 + +#define MII_M1011_IMASK 0x12 +#define MII_M1011_IMASK_INIT 0x6400 +#define MII_M1011_IMASK_CLEAR 0x0000 + +#define MII_DM9161_SCR 0x10 +#define MII_DM9161_SCR_INIT 0x0610 #define MII_DM9161_SCR_RMII_INIT 0x0710 /* DM9161 Specified Configuration and Status Register */ -#define MII_DM9161_SCSR 0x11 -#define MII_DM9161_SCSR_100F 0x8000 -#define MII_DM9161_SCSR_100H 0x4000 -#define MII_DM9161_SCSR_10F 0x2000 -#define MII_DM9161_SCSR_10H 0x1000 +#define MII_DM9161_SCSR 0x11 +#define MII_DM9161_SCSR_100F 0x8000 +#define MII_DM9161_SCSR_100H 0x4000 +#define MII_DM9161_SCSR_10F 0x2000 +#define MII_DM9161_SCSR_10H 0x1000 /* DM9161 Interrupt Register */ -#define MII_DM9161_INTR 0x15 -#define MII_DM9161_INTR_PEND 0x8000 -#define MII_DM9161_INTR_DPLX_MASK 0x0800 -#define MII_DM9161_INTR_SPD_MASK 0x0400 -#define MII_DM9161_INTR_LINK_MASK 0x0200 -#define MII_DM9161_INTR_MASK 0x0100 -#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 -#define MII_DM9161_INTR_SPD_CHANGE 0x0008 -#define MII_DM9161_INTR_LINK_CHANGE 0x0004 -#define MII_DM9161_INTR_INIT 0x0000 -#define MII_DM9161_INTR_STOP \ +#define MII_DM9161_INTR 0x15 +#define MII_DM9161_INTR_PEND 0x8000 +#define MII_DM9161_INTR_DPLX_MASK 0x0800 +#define MII_DM9161_INTR_SPD_MASK 0x0400 +#define MII_DM9161_INTR_LINK_MASK 0x0200 +#define MII_DM9161_INTR_MASK 0x0100 +#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 +#define MII_DM9161_INTR_SPD_CHANGE 0x0008 +#define MII_DM9161_INTR_LINK_CHANGE 0x0004 +#define MII_DM9161_INTR_INIT 0x0000 +#define MII_DM9161_INTR_STOP \ (MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) /* DM9161 10BT Configuration/Status */ -#define MII_DM9161_10BTCSR 0x12 -#define MII_DM9161_10BTCSR_INIT 0x7800 +#define MII_DM9161_10BTCSR 0x12 +#define MII_DM9161_10BTCSR_INIT 0x7800 #define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ - SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | \ - SUPPORTED_100baseT_Full | \ - SUPPORTED_Autoneg | \ - SUPPORTED_TP | \ - SUPPORTED_MII) + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) #define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ - SUPPORTED_1000baseT_Half | \ - SUPPORTED_1000baseT_Full) + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) -#define MII_READ_COMMAND 0x00000001 +#define MII_READ_COMMAND 0x00000001 -#define MII_INTERRUPT_DISABLED 0x0 -#define MII_INTERRUPT_ENABLED 0x1 +#define MII_INTERRUPT_DISABLED 0x0 +#define MII_INTERRUPT_ENABLED 0x1 #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 /* Duplex, half or full. */ -#define DUPLEX_HALF 0x00 -#define DUPLEX_FULL 0x01 +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 /* Indicates what features are supported by the interface. */ -#define SUPPORTED_10baseT_Half (1 << 0) -#define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) -#define SUPPORTED_1000baseT_Half (1 << 4) -#define SUPPORTED_1000baseT_Full (1 << 5) -#define SUPPORTED_Autoneg (1 << 6) -#define SUPPORTED_TP (1 << 7) -#define SUPPORTED_AUI (1 << 8) -#define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) -#define SUPPORTED_BNC (1 << 11) -#define SUPPORTED_10000baseT_Full (1 << 12) - -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) -#define ADVERTISED_100baseT_Half (1 << 2) -#define ADVERTISED_100baseT_Full (1 << 3) -#define ADVERTISED_1000baseT_Half (1 << 4) -#define ADVERTISED_1000baseT_Full (1 << 5) -#define ADVERTISED_Autoneg (1 << 6) -#define ADVERTISED_TP (1 << 7) -#define ADVERTISED_AUI (1 << 8) -#define ADVERTISED_MII (1 << 9) -#define ADVERTISED_FIBRE (1 << 10) -#define ADVERTISED_BNC (1 << 11) -#define ADVERTISED_10000baseT_Full (1 << 12) +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) + +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) /* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_RESV 0x1c00 /* Unused... */ -#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ -#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_RESV 0x1c00 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ #define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ - ADVERTISE_CSMA) + ADVERTISE_CSMA) #define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) + ADVERTISE_100HALF | ADVERTISE_100FULL) /* Taken from mii_if_info and sungem_phy.h */ struct uec_mii_info { - /* Information about the PHY type */ - /* And management functions */ - struct phy_info *phyinfo; + /* Information about the PHY type */ + /* And management functions */ + struct phy_info *phyinfo; - struct eth_device *dev; + struct eth_device *dev; - /* forced speed & duplex (no autoneg) - * partner speed & duplex & pause (autoneg) - */ - int speed; - int duplex; - int pause; + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; - /* The most recently read link state */ - int link; + /* The most recently read link state */ + int link; - /* Enabled Interrupts */ - u32 interrupts; + /* Enabled Interrupts */ + u32 interrupts; - u32 advertising; - int autoneg; - int mii_id; + u32 advertising; + int autoneg; + int mii_id; - /* private data pointer */ - /* For use by PHYs to maintain extra state */ - void *priv; + /* private data pointer */ + /* For use by PHYs to maintain extra state */ + void *priv; - /* Provided by ethernet driver */ - int (*mdio_read) (struct eth_device *dev, int mii_id, int reg); - void (*mdio_write) (struct eth_device *dev, int mii_id, int reg, int val); + /* Provided by ethernet driver */ + int (*mdio_read) (struct eth_device * dev, int mii_id, int reg); + void (*mdio_write) (struct eth_device * dev, int mii_id, int reg, + int val); }; /* struct phy_info: a structure which defines attributes for a PHY @@ -221,36 +222,38 @@ struct uec_mii_info { * Each PHY must declare config_aneg, and read_status. */ struct phy_info { - u32 phy_id; - char *name; - unsigned int phy_id_mask; - u32 features; + u32 phy_id; + char *name; + unsigned int phy_id_mask; + u32 features; - /* Called to initialize the PHY */ - int (*init)(struct uec_mii_info *mii_info); + /* Called to initialize the PHY */ + int (*init) (struct uec_mii_info * mii_info); - /* Called to suspend the PHY for power */ - int (*suspend)(struct uec_mii_info *mii_info); + /* Called to suspend the PHY for power */ + int (*suspend) (struct uec_mii_info * mii_info); - /* Reconfigures autonegotiation (or disables it) */ - int (*config_aneg)(struct uec_mii_info *mii_info); + /* Reconfigures autonegotiation (or disables it) */ + int (*config_aneg) (struct uec_mii_info * mii_info); - /* Determines the negotiated speed and duplex */ - int (*read_status)(struct uec_mii_info *mii_info); + /* Determines the negotiated speed and duplex */ + int (*read_status) (struct uec_mii_info * mii_info); - /* Clears any pending interrupts */ - int (*ack_interrupt)(struct uec_mii_info *mii_info); + /* Clears any pending interrupts */ + int (*ack_interrupt) (struct uec_mii_info * mii_info); - /* Enables or disables interrupts */ - int (*config_intr)(struct uec_mii_info *mii_info); + /* Enables or disables interrupts */ + int (*config_intr) (struct uec_mii_info * mii_info); - /* Clears up any memory if needed */ - void (*close)(struct uec_mii_info *mii_info); + /* Clears up any memory if needed */ + void (*close) (struct uec_mii_info * mii_info); }; -struct phy_info *get_phy_info(struct uec_mii_info *mii_info); -void write_phy_reg(struct eth_device *dev, int mii_id, int regnum, int value); -int read_phy_reg(struct eth_device *dev, int mii_id, int regnum); -void mii_clear_phy_interrupt(struct uec_mii_info *mii_info); -void mii_configure_phy_interrupt(struct uec_mii_info *mii_info, u32 interrupts); +struct phy_info *get_phy_info (struct uec_mii_info *mii_info); +void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, + int value); +int read_phy_reg (struct eth_device *dev, int mii_id, int regnum); +void mii_clear_phy_interrupt (struct uec_mii_info *mii_info); +void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, + u32 interrupts); #endif /* __UEC_PHY_H__ */ |
