diff options
Diffstat (limited to 'drivers/net/fec_mxc.c')
| -rw-r--r-- | drivers/net/fec_mxc.c | 49 |
1 files changed, 33 insertions, 16 deletions
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index fbfc842aca..3e232c7cbc 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -31,9 +31,16 @@ #include <asm/arch/imx-regs.h> #include <asm/io.h> #include <asm/errno.h> +#include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; +/* + * Timeout the transfer after 5 mS. This is usually a bit more, since + * the code in the tightloops this timeout is used in adds some overhead. + */ +#define FEC_XFER_TIMEOUT 5000 + #ifndef CONFIG_MII #error "CONFIG_MII has to be defined!" #endif @@ -249,7 +256,7 @@ static int miiphy_wait_aneg(struct eth_device *dev) static int fec_rx_task_enable(struct fec_priv *fec) { - writel(1 << 24, &fec->eth->r_des_active); + writel(FEC_R_DES_ACTIVE_RDAR, &fec->eth->r_des_active); return 0; } @@ -260,7 +267,7 @@ static int fec_rx_task_disable(struct fec_priv *fec) static int fec_tx_task_enable(struct fec_priv *fec) { - writel(1 << 24, &fec->eth->x_des_active); + writel(FEC_X_DES_ACTIVE_TDAR, &fec->eth->x_des_active); return 0; } @@ -694,8 +701,10 @@ static void fec_halt(struct eth_device *dev) static int fec_send(struct eth_device *dev, void *packet, int length) { unsigned int status; - uint32_t size; + uint32_t size, end; uint32_t addr; + int timeout = FEC_XFER_TIMEOUT; + int ret = 0; /* * This routine transmits one frame. This routine only accepts @@ -721,8 +730,9 @@ static int fec_send(struct eth_device *dev, void *packet, int length) #endif addr = (uint32_t)packet; - size = roundup(length, ARCH_DMA_MINALIGN); - flush_dcache_range(addr, addr + size); + end = roundup(addr + length, ARCH_DMA_MINALIGN); + addr &= ~(ARCH_DMA_MINALIGN - 1); + flush_dcache_range(addr, end); writew(length, &fec->tbd_base[fec->tbd_index].data_length); writel(addr, &fec->tbd_base[fec->tbd_index].data_pointer); @@ -758,22 +768,28 @@ static int fec_send(struct eth_device *dev, void *packet, int length) * invalidate data cache to see what's really in RAM. Also, we need * barrier here. */ - invalidate_dcache_range(addr, addr + size); - while (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) { - udelay(1); - invalidate_dcache_range(addr, addr + size); + while (--timeout) { + if (!(readl(&fec->eth->x_des_active) & FEC_X_DES_ACTIVE_TDAR)) + break; } - debug("fec_send: status 0x%x index %d\n", + if (!timeout) + ret = -EINVAL; + + invalidate_dcache_range(addr, addr + size); + if (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) + ret = -EINVAL; + + debug("fec_send: status 0x%x index %d ret %i\n", readw(&fec->tbd_base[fec->tbd_index].status), - fec->tbd_index); + fec->tbd_index, ret); /* for next transmission use the other buffer */ if (fec->tbd_index) fec->tbd_index = 0; else fec->tbd_index = 1; - return 0; + return ret; } /** @@ -789,9 +805,9 @@ static int fec_recv(struct eth_device *dev) int frame_length, len = 0; struct nbuf *frame; uint16_t bd_status; - uint32_t addr, size; + uint32_t addr, size, end; int i; - uchar buff[FEC_MAX_PKT_SIZE]; + uchar buff[FEC_MAX_PKT_SIZE] __aligned(ARCH_DMA_MINALIGN); /* * Check if any critical events have happened @@ -853,8 +869,9 @@ static int fec_recv(struct eth_device *dev) * Invalidate data cache over the buffer */ addr = (uint32_t)frame; - size = roundup(frame_length, ARCH_DMA_MINALIGN); - invalidate_dcache_range(addr, addr + size); + end = roundup(addr + frame_length, ARCH_DMA_MINALIGN); + addr &= ~(ARCH_DMA_MINALIGN - 1); + invalidate_dcache_range(addr, end); /* * Fill the buffer and pass it to upper layers |
