summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000.c')
-rw-r--r--drivers/net/e1000.c17
1 files changed, 9 insertions, 8 deletions
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 777783a91b..b8dd9f2fe4 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -46,8 +46,7 @@ tested on both gig copper and gig fiber boards
#define TOUT_LOOP 100000
-#undef virt_to_bus
-#define virt_to_bus(x) ((unsigned long)x)
+#define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v))
#define bus_to_phys(devno, a) pci_mem_to_phys(devno, a)
#define mdelay(n) udelay((n)*1000)
@@ -357,7 +356,7 @@ e1000_acquire_eeprom(struct e1000_hw *hw)
struct e1000_eeprom_info *eeprom = &hw->eeprom;
uint32_t eecd, i = 0;
- DEBUGOUT();
+ DEBUGFUNC();
if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
return -E1000_ERR_SWFW_SYNC;
@@ -418,7 +417,7 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
int32_t ret_val = E1000_SUCCESS;
uint16_t eeprom_size;
- DEBUGOUT();
+ DEBUGFUNC();
switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -2355,7 +2354,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
int32_t ret_val;
uint16_t phy_data;
- DEBUGOUT();
+ DEBUGFUNC();
if (hw->phy_reset_disable)
return E1000_SUCCESS;
@@ -5017,7 +5016,7 @@ e1000_transmit(struct eth_device *nic, volatile void *packet, int length)
txp = tx_base + tx_tail;
tx_tail = (tx_tail + 1) % 8;
- txp->buffer_addr = cpu_to_le64(virt_to_bus(packet));
+ txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, packet));
txp->lower.data = cpu_to_le32(hw->txd_cmd | length);
txp->upper.data = 0;
E1000_WRITE_REG(hw, TDT, tx_tail);
@@ -5145,6 +5144,8 @@ e1000_initialize(bd_t * bis)
int idx = 0;
u32 PciCommandWord;
+ DEBUGFUNC();
+
while (1) { /* Find PCI device(s) */
if ((devno = pci_find_devices(supported, idx++)) < 0) {
break;
@@ -5170,7 +5171,6 @@ e1000_initialize(bd_t * bis)
hw = (struct e1000_hw *) malloc(sizeof (*hw));
hw->pdev = devno;
nic->priv = hw;
- nic->iobase = bus_to_phys(devno, iobase);
sprintf(nic->name, "e1000#%d", card_number);
@@ -5180,7 +5180,8 @@ e1000_initialize(bd_t * bis)
hw->autoneg_failed = 0;
hw->autoneg = 1;
hw->get_link_status = TRUE;
- hw->hw_addr = (typeof(hw->hw_addr)) iobase;
+ hw->hw_addr =
+ pci_map_bar(devno, PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
hw->mac_type = e1000_undefined;
/* MAC and Phy settings */
OpenPOWER on IntegriCloud