diff options
Diffstat (limited to 'drivers/ddr/fsl/mpc85xx_ddr_gen2.c')
| -rw-r--r-- | drivers/ddr/fsl/mpc85xx_ddr_gen2.c | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen2.c b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c new file mode 100644 index 0000000000..c22dea5c24 --- /dev/null +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c @@ -0,0 +1,95 @@ +/* + * Copyright 2008-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <fsl_ddr_sdram.h> + +#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) +#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL +#endif + +void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num, int step) +{ + unsigned int i; + ccsr_ddr_t *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + +#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx) + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + uint svr; +#endif + + if (ctrl_num) { + printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); + return; + } + +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 + /* + * Set the DDR IO receiver to an acceptable bias point. + * Fixed in Rev 2.1. + */ + svr = get_svr(); + if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) { + if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) == + SDRAM_CFG_SDRAM_TYPE_DDR2) + out_be32(&gur->ddrioovcr, 0x90000000); + else + out_be32(&gur->ddrioovcr, 0xA8000000); + } +#endif + + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i == 0) { + out_be32(&ddr->cs0_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs0_config, regs->cs[i].config); + + } else if (i == 1) { + out_be32(&ddr->cs1_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs1_config, regs->cs[i].config); + + } else if (i == 2) { + out_be32(&ddr->cs2_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs2_config, regs->cs[i].config); + + } else if (i == 3) { + out_be32(&ddr->cs3_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs3_config, regs->cs[i].config); + } + } + + out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3); + out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0); + out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1); + out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2); + out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); + out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); + out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); + out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); + out_be32(&ddr->sdram_data_init, regs->ddr_data_init); + out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); + out_be32(&ddr->init_addr, regs->ddr_init_addr); + out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); + + /* + * 200 painful micro-seconds must elapse between + * the DDR clock setup and the DDR config enable. + */ + udelay(200); + asm volatile("sync;isync"); + + out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg); + + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ + while (in_be32(&ddr->sdram_cfg_2) & 0x10) { + udelay(10000); /* throttle polling rate */ + } +} |
