diff options
Diffstat (limited to 'doc/device-tree-bindings/mtd/altera_qspi.txt')
| -rw-r--r-- | doc/device-tree-bindings/mtd/altera_qspi.txt | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/mtd/altera_qspi.txt b/doc/device-tree-bindings/mtd/altera_qspi.txt new file mode 100644 index 0000000000..3361ac92a3 --- /dev/null +++ b/doc/device-tree-bindings/mtd/altera_qspi.txt @@ -0,0 +1,35 @@ +Altera QUADSPI driver + +Required properties: +- compatible: Should be "altr,quadspi-1.0" +- reg: Address and length of the register set for the device. It contains + the information of registers in the same order as described by reg-names +- reg-names: Should contain the reg names + "avl_csr": Should contain the register configuration base address + "avl_mem": Should contain the data base address +- #address-cells: Must be <1>. +- #size-cells: Must be <0>. +- flash device tree subnode, there must be a node with the following fields: + - compatible: Should contain the flash name: + 1. EPCS: epcs16, epcs64, epcs128 + 2. EPCQ: epcq16, epcq32, epcq64, epcq128, epcq256, epcq512, epcq1024 + 3. EPCQ-L: epcql256, epcql512, epcql1024 + - #address-cells: please refer to /mtd/partition.txt + - #size-cells: please refer to /mtd/partition.txt + For partitions inside each flash, please refer to /mtd/partition.txt + +Example: + + quadspi_controller_0: quadspi@0x180014a0 { + compatible = "altr,quadspi-1.0"; + reg = <0x180014a0 0x00000020>, + <0x14000000 0x04000000>; + reg-names = "avl_csr", "avl_mem"; + #address-cells = <1>; + #size-cells = <0>; + flash0: epcq512@0 { + compatible = "altr,epcq512"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; |
