summaryrefslogtreecommitdiffstats
path: root/cpu/ppc4xx/44x_spd_ddr.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx/44x_spd_ddr.c')
-rw-r--r--cpu/ppc4xx/44x_spd_ddr.c15
1 files changed, 6 insertions, 9 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 4a4c6f29ed..b9cf5cbfcc 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -251,10 +251,10 @@ void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))
* memory.
*
* If at some time this restriction doesn't apply anymore, just define
- * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
* everything correctly.
*/
-#ifdef CFG_ENABLE_SDRAM_CACHE
+#ifdef CONFIG_4xx_DCACHE
#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
#else
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
@@ -345,7 +345,7 @@ long int spd_sdram(void) {
*/
check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
/*
* Soft-reset SDRAM controller.
*/
@@ -645,7 +645,7 @@ static void program_rtr(unsigned long *dimm_populated,
unsigned char refresh_rate_type;
unsigned long refresh_interval;
unsigned long sdram_rtr;
- PPC440_SYS_INFO sys_info;
+ PPC4xx_SYS_INFO sys_info;
/*
* get the board info
@@ -721,7 +721,7 @@ static void program_tr0(unsigned long *dimm_populated,
unsigned long tcyc_2_0_ns_x_10;
unsigned long tcyc_reg;
unsigned long bus_period_x_10;
- PPC440_SYS_INFO sys_info;
+ PPC4xx_SYS_INFO sys_info;
unsigned long residue;
/*
@@ -1065,7 +1065,7 @@ static void program_tr1(void)
unsigned char window_found;
unsigned char fail_found;
unsigned char pass_found;
- PPC440_SYS_INFO sys_info;
+ PPC4xx_SYS_INFO sys_info;
/*
* get the board info
@@ -1197,9 +1197,6 @@ static void program_tr1(void)
}
rdclt_average = ((max_start + max_end) >> 1);
- if (rdclt_average >= 0x60)
- while (1)
- ;
if (rdclt_average < 0) {
rdclt_average = 0;
OpenPOWER on IntegriCloud