diff options
Diffstat (limited to 'cpu/mpc86xx/interrupts.c')
| -rw-r--r-- | cpu/mpc86xx/interrupts.c | 51 |
1 files changed, 29 insertions, 22 deletions
diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c index 08e0675fee..d9f634fdab 100644 --- a/cpu/mpc86xx/interrupts.c +++ b/cpu/mpc86xx/interrupts.c @@ -8,7 +8,7 @@ * (C) Copyright 2003 Motorola Inc. (MPC85xx port) * Xianghua Xiao (X.Xiao@motorola.com) * - * (C) Copyright 2004 Freescale Semiconductor. (MPC86xx Port) + * (C) Copyright 2004, 2007 Freescale Semiconductor. (MPC86xx Port) * Jeff Brown * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * @@ -80,25 +80,10 @@ int interrupt_init(void) { int ret; - /* - * The IRQ0 on Rev 2 is pulled high (low in Rev 1.x) to - * implement PEX10 errata. As INT is active high, it - * will cause core to take 0x500 interrupt. - * - * Due to the PIC's default pass through mode, as soon - * as interrupts are enabled (MSR[EE] = 1), an interrupt - * will be taken and u-boot will hang. This is due to a - * hardware change (per an errata fix) on new revisions - * of the board with Rev 2.x parts. - * - * Setting the PIC to mixed mode prevents the hang. - */ - if ((get_svr() & 0xf0) == 0x20) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - immr->im_pic.gcr = MPC86xx_PICGCR_RST; - while (immr->im_pic.gcr & MPC86xx_PICGCR_RST); - immr->im_pic.gcr = MPC86xx_PICGCR_MODE; - } + volatile immap_t *immr = (immap_t *)CFG_IMMR; + immr->im_pic.gcr = MPC86xx_PICGCR_RST; + while (immr->im_pic.gcr & MPC86xx_PICGCR_RST); + immr->im_pic.gcr = MPC86xx_PICGCR_MODE; /* call cpu specific function from $(CPU)/interrupts.c */ ret = interrupt_init_cpu(&decrementer_count); @@ -119,6 +104,30 @@ int interrupt_init(void) get_msr(), get_dec()); +#ifdef CONFIG_INTERRUPTS + volatile ccsr_pic_t *pic = &immr->im_pic; + + pic->iivpr1 = 0x810001; /* 50220 enable mcm interrupts */ + debug("iivpr1@%x = %x\n", &pic->iivpr1, pic->iivpr1); + + pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */ + debug("iivpr2@%x = %x\n", &pic->iivpr2, pic->iivpr2); + + pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */ + debug("iivpr3@%x = %x\n", &pic->iivpr3, pic->iivpr3); + +#if defined(CONFIG_PCI1) || defined(CONFIG_PCIE1) + pic->iivpr8 = 0x810008; /* enable pcie1 interrupts */ + debug("iivpr8@%x = %x\n", &pic->iivpr8, pic->iivpr8); +#endif +#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2) + pic->iivpr9 = 0x810009; /* enable pcie2 interrupts */ + debug("iivpr9@%x = %x\n", &pic->iivpr9, pic->iivpr9); +#endif + + pic->ctpr = 0; /* 40080 clear current task priority register */ +#endif + return 0; } @@ -158,8 +167,6 @@ void timer_interrupt(struct pt_regs *regs) timestamp++; - ppcDcbf((unsigned long)×tamp); - /* Restore Decrementer Count */ set_dec(decrementer_count); |
