diff options
Diffstat (limited to 'cpu/i386/sc520/sc520.c')
| -rw-r--r-- | cpu/i386/sc520/sc520.c | 198 |
1 files changed, 0 insertions, 198 deletions
diff --git a/cpu/i386/sc520/sc520.c b/cpu/i386/sc520/sc520.c deleted file mode 100644 index 4b566a75cc..0000000000 --- a/cpu/i386/sc520/sc520.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* stuff specific for the sc520, - * but idependent of implementation */ - -#include <common.h> -#include <asm/io.h> -#include <asm/ic/sc520.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * utility functions for boards based on the AMD sc520 - * - * void init_sc520(void) - * unsigned long init_sc520_dram(void) - */ - -volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000; - -void init_sc520(void) -{ - /* Set the UARTxCTL register at it's slower, - * baud clock giving us a 1.8432 MHz reference - */ - sc520_mmcr->uart1ctl = 0x07; - sc520_mmcr->uart2ctl = 0x07; - - /* first set the timer pin mapping */ - sc520_mmcr->clksel = 0x72; /* no clock frequency selected, use 1.1892MHz */ - - /* enable PCI bus arbitrer */ - sc520_mmcr->sysarbctl = 0x02; /* enable concurrent mode */ - - sc520_mmcr->sysarbmenb = 0x1f; /* enable external grants */ - sc520_mmcr->hbctl = 0x04; /* enable posted-writes */ - - if (CONFIG_SYS_SC520_HIGH_SPEED) { - sc520_mmcr->cpuctl = 0x02; /* set it to 133 MHz and write back */ - gd->cpu_clk = 133000000; - printf("## CPU Speed set to 133MHz\n"); - } else { - sc520_mmcr->cpuctl = 0x01; /* set it to 100 MHz and write back */ - printf("## CPU Speed set to 100MHz\n"); - gd->cpu_clk = 100000000; - } - - - /* wait at least one millisecond */ - asm("movl $0x2000,%%ecx\n" - "0: pushl %%ecx\n" - "popl %%ecx\n" - "loop 0b\n": : : "ecx"); - - /* turn on the SDRAM write buffer */ - sc520_mmcr->dbctl = 0x11; - - /* turn on the cache and disable write through */ - asm("movl %%cr0, %%eax\n" - "andl $0x9fffffff, %%eax\n" - "movl %%eax, %%cr0\n" : : : "eax"); -} - -unsigned long init_sc520_dram(void) -{ - bd_t *bd = gd->bd; - - u32 dram_present=0; - u32 dram_ctrl; -#ifdef CONFIG_SYS_SDRAM_DRCTMCTL - /* these memory control registers are set up in the assember part, - * in sc520_asm.S, during 'mem_init'. If we muck with them here, - * after we are running a stack in RAM, we have troubles. Besides, - * these refresh and delay values are better ? simply specified - * outright in the include/configs/{cfg} file since the HW designer - * simply dictates it. - */ -#else - int val; - - int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY; - int refresh_rate = CONFIG_SYS_SDRAM_REFRESH_RATE; - int ras_cas_delay = CONFIG_SYS_SDRAM_RAS_CAS_DELAY; - - /* set SDRAM speed here */ - - refresh_rate/=78; - if (refresh_rate<=1) { - val = 0; /* 7.8us */ - } else if (refresh_rate==2) { - val = 1; /* 15.6us */ - } else if (refresh_rate==3 || refresh_rate==4) { - val = 2; /* 31.2us */ - } else { - val = 3; /* 62.4us */ - } - - sc520_mmcr->drcctl = (sc520_mmcr->drcctl & 0xcf) | (val<<4); - - val = sc520_mmcr->drctmctl & 0xf0; - - if (cas_precharge_delay==3) { - val |= 0x04; /* 3T */ - } else if (cas_precharge_delay==4) { - val |= 0x08; /* 4T */ - } else if (cas_precharge_delay>4) { - val |= 0x0c; - } - - if (ras_cas_delay > 3) { - val |= 2; - } else { - val |= 1; - } - sc520_mmcr->drctmctl = val; -#endif - - /* We read-back the configuration of the dram - * controller that the assembly code wrote */ - dram_ctrl = sc520_mmcr->drcbendadr; - - bd->bi_dram[0].start = 0; - if (dram_ctrl & 0x80) { - /* bank 0 enabled */ - dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22; - bd->bi_dram[0].size = bd->bi_dram[1].start; - - } else { - bd->bi_dram[0].size = 0; - bd->bi_dram[1].start = bd->bi_dram[0].start; - } - - if (dram_ctrl & 0x8000) { - /* bank 1 enabled */ - dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14; - bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start; - } else { - bd->bi_dram[1].size = 0; - bd->bi_dram[2].start = bd->bi_dram[1].start; - } - - if (dram_ctrl & 0x800000) { - /* bank 2 enabled */ - dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6; - bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start; - } else { - bd->bi_dram[2].size = 0; - bd->bi_dram[3].start = bd->bi_dram[2].start; - } - - if (dram_ctrl & 0x80000000) { - /* bank 3 enabled */ - dram_present = (dram_ctrl & 0x7f000000) >> 2; - bd->bi_dram[3].size = dram_present - bd->bi_dram[3].start; - } else { - bd->bi_dram[3].size = 0; - } - - -#if 0 - printf("Configured %d bytes of dram\n", dram_present); -#endif - gd->ram_size = dram_present; - - return dram_present; -} - -#ifdef CONFIG_SYS_SC520_RESET -void reset_cpu(ulong addr) -{ - printf("Resetting using SC520 MMCR\n"); - /* Write a '1' to the SYS_RST of the RESCFG MMCR */ - sc520_mmcr->rescfg = 0x01; - - /* NOTREACHED */ -} -#endif |
