diff options
Diffstat (limited to 'cpu/at32ap/hsdramc.c')
| -rw-r--r-- | cpu/at32ap/hsdramc.c | 43 |
1 files changed, 14 insertions, 29 deletions
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c index f36da35452..a936e03166 100644 --- a/cpu/at32ap/hsdramc.c +++ b/cpu/at32ap/hsdramc.c @@ -25,17 +25,11 @@ #include <asm/io.h> #include <asm/sdram.h> -#include <asm/arch/platform.h> +#include <asm/arch/clk.h> +#include <asm/arch/memory-map.h> #include "hsdramc1.h" -struct hsdramc { - const struct device *hebi; - void *regs; -}; - -static struct hsdramc hsdramc; - unsigned long sdram_init(const struct sdram_info *info) { unsigned long *sdram = (unsigned long *)uncached(info->phys_addr); @@ -44,16 +38,6 @@ unsigned long sdram_init(const struct sdram_info *info) unsigned long bus_hz; unsigned int i; - hsdramc.hebi = get_device(DEVICE_HEBI); - if (!hsdramc.hebi) - return 0; - - /* FIXME: Both of these lines are complete hacks */ - hsdramc.regs = hsdramc.hebi->regs + 0x400; - bus_hz = pm_get_clock_freq(hsdramc.hebi->resource[0].u.clock.id); - - cpu_enable_sdram(); - tmp = (HSDRAMC1_BF(NC, info->col_bits - 8) | HSDRAMC1_BF(NR, info->row_bits - 11) | HSDRAMC1_BF(NB, info->bank_bits - 1) @@ -74,7 +58,7 @@ unsigned long sdram_init(const struct sdram_info *info) + info->bank_bits + 2); #endif - hsdramc1_writel(&hsdramc, CR, tmp); + hsdramc1_writel(CR, tmp); /* * Initialization sequence for SDRAM, from the data sheet: @@ -87,15 +71,15 @@ unsigned long sdram_init(const struct sdram_info *info) /* * 2. A Precharge All command is issued to the SDRAM */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_BANKS_PRECHARGE); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE); + hsdramc1_readl(MR); writel(0, sdram); /* * 3. Eight auto-refresh (CBR) cycles are provided */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_AUTO_REFRESH); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH); + hsdramc1_readl(MR); for (i = 0; i < 8; i++) writel(0, sdram); @@ -106,8 +90,8 @@ unsigned long sdram_init(const struct sdram_info *info) * * CAS from info struct, burst length 1, serial burst type */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_LOAD_MODE); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE); + hsdramc1_readl(MR); writel(0, sdram + (info->cas << 4)); /* @@ -117,9 +101,9 @@ unsigned long sdram_init(const struct sdram_info *info) * From the timing diagram, it looks like tMRD is 3 * cycles...try a dummy read from the peripheral bus. */ - hsdramc1_readl(&hsdramc, MR); - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_NORMAL); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_readl(MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL); + hsdramc1_readl(MR); writel(0, sdram); /* @@ -128,7 +112,8 @@ unsigned long sdram_init(const struct sdram_info *info) * * 15.6 us is a typical value for a burst of length one */ - hsdramc1_writel(&hsdramc, TR, (156 * (bus_hz / 1000)) / 10000); + bus_hz = get_sdram_clk_rate(); + hsdramc1_writel(TR, (156 * (bus_hz / 1000)) / 10000); printf("SDRAM: %u MB at address 0x%08lx\n", sdram_size >> 20, info->phys_addr); |
