summaryrefslogtreecommitdiffstats
path: root/common/cyclon2.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/cyclon2.c')
-rw-r--r--common/cyclon2.c301
1 files changed, 0 insertions, 301 deletions
diff --git a/common/cyclon2.c b/common/cyclon2.c
deleted file mode 100644
index 3ed64b2793..0000000000
--- a/common/cyclon2.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * (C) Copyright 2006
- * Heiko Schocher, hs@denx.de
- * Based on ACE1XK.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h> /* core U-Boot definitions */
-#include <altera.h>
-#include <ACEX1K.h> /* ACEX device family */
-
-/* Define FPGA_DEBUG to get debug printf's */
-#ifdef FPGA_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-/* Note: The assumption is that we cannot possibly run fast enough to
- * overrun the device (the Slave Parallel mode can free run at 50MHz).
- * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
- * the board config file to slow things down.
- */
-#ifndef CONFIG_FPGA_DELAY
-#define CONFIG_FPGA_DELAY()
-#endif
-
-#ifndef CONFIG_SYS_FPGA_WAIT
-#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10 /* 100 ms */
-#endif
-
-static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
-static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
-/* static int CYC2_ps_info( Altera_desc *desc ); */
-static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
-
-/* ------------------------------------------------------------------------- */
-/* CYCLON2 Generic Implementation */
-int CYC2_load (Altera_desc * desc, void *buf, size_t bsize)
-{
- int ret_val = FPGA_FAIL;
-
- switch (desc->iface) {
- case passive_serial:
- PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
- ret_val = CYC2_ps_load (desc, buf, bsize);
- break;
-
- /* Add new interface types here */
-
- default:
- printf ("%s: Unsupported interface type, %d\n",
- __FUNCTION__, desc->iface);
- }
-
- return ret_val;
-}
-
-int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize)
-{
- int ret_val = FPGA_FAIL;
-
- switch (desc->iface) {
- case passive_serial:
- PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
- ret_val = CYC2_ps_dump (desc, buf, bsize);
- break;
-
- /* Add new interface types here */
-
- default:
- printf ("%s: Unsupported interface type, %d\n",
- __FUNCTION__, desc->iface);
- }
-
- return ret_val;
-}
-
-int CYC2_info( Altera_desc *desc )
-{
- return FPGA_SUCCESS;
-}
-
-int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
-{
- int ret_val = FPGA_FAIL; /* assume a failure */
-
- if (desc->family != Altera_CYC2) {
- printf ("%s: Unsupported family type, %d\n",
- __FUNCTION__, desc->family);
- return FPGA_FAIL;
- } else
- switch (desc->iface) {
- case passive_serial:
- ret_val = CYC2_ps_reloc (desc, reloc_offset);
- break;
-
- /* Add new interface types here */
-
- default:
- printf ("%s: Unsupported interface type, %d\n",
- __FUNCTION__, desc->iface);
- }
-
- return ret_val;
-}
-
-/* ------------------------------------------------------------------------- */
-/* CYCLON2 Passive Serial Generic Implementation */
-static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
-{
- int ret_val = FPGA_FAIL; /* assume the worst */
- Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
- int ret = 0;
-
- PRINTF ("%s: start with interface functions @ 0x%p\n",
- __FUNCTION__, fn);
-
- if (fn) {
- int cookie = desc->cookie; /* make a local copy */
- unsigned long ts; /* timestamp */
-
- PRINTF ("%s: Function Table:\n"
- "ptr:\t0x%p\n"
- "struct: 0x%p\n"
- "config:\t0x%p\n"
- "status:\t0x%p\n"
- "write:\t0x%p\n"
- "done:\t0x%p\n\n",
- __FUNCTION__, &fn, fn, fn->config, fn->status,
- fn->write, fn->done);
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
- printf ("Loading FPGA Device %d...", cookie);
-#endif
-
- /*
- * Run the pre configuration function if there is one.
- */
- if (*fn->pre) {
- (*fn->pre) (cookie);
- }
-
- /* Establish the initial state */
- (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
-
- udelay(2); /* T_cfg > 2us */
-
- /* Wait for nSTATUS to be asserted */
- ts = get_timer (0); /* get current time */
- do {
- CONFIG_FPGA_DELAY ();
- if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
- puts ("** Timeout waiting for STATUS to go high.\n");
- (*fn->abort) (cookie);
- return FPGA_FAIL;
- }
- } while (!(*fn->status) (cookie));
-
- /* Get ready for the burn */
- CONFIG_FPGA_DELAY ();
-
- ret = (*fn->write) (buf, bsize, TRUE, cookie);
- if (ret) {
- puts ("** Write failed.\n");
- (*fn->abort) (cookie);
- return FPGA_FAIL;
- }
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
- puts(" OK? ...");
-#endif
-
- CONFIG_FPGA_DELAY ();
-
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
- putc (' '); /* terminate the dotted line */
-#endif
-
- /*
- * Checking FPGA's CONF_DONE signal - correctly booted ?
- */
-
- if ( ! (*fn->done) (cookie) ) {
- puts ("** Booting failed! CONF_DONE is still deasserted.\n");
- (*fn->abort) (cookie);
- return (FPGA_FAIL);
- }
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
- puts(" OK\n");
-#endif
-
- ret_val = FPGA_SUCCESS;
-
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
- if (ret_val == FPGA_SUCCESS) {
- puts ("Done.\n");
- }
- else {
- puts ("Fail.\n");
- }
-#endif
- (*fn->post) (cookie);
-
- } else {
- printf ("%s: NULL Interface function table!\n", __FUNCTION__);
- }
-
- return ret_val;
-}
-
-static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
-{
- /* Readback is only available through the Slave Parallel and */
- /* boundary-scan interfaces. */
- printf ("%s: Passive Serial Dumping is unavailable\n",
- __FUNCTION__);
- return FPGA_FAIL;
-}
-
-static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
-{
- int ret_val = FPGA_FAIL; /* assume the worst */
- Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
- (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
-
- if (fn) {
- ulong addr;
-
- /* Get the relocated table address */
- addr = (ulong) fn + reloc_offset;
- fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
-
- if (!fn_r->relocated) {
-
- if (memcmp (fn_r, fn,
- sizeof (Altera_CYC2_Passive_Serial_fns))
- == 0) {
- /* good copy of the table, fix the descriptor pointer */
- desc->iface_fns = fn_r;
- } else {
- PRINTF ("%s: Invalid function table at 0x%p\n",
- __FUNCTION__, fn_r);
- return FPGA_FAIL;
- }
-
- PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
- desc);
-
- addr = (ulong) (fn->pre) + reloc_offset;
- fn_r->pre = (Altera_pre_fn) addr;
-
- addr = (ulong) (fn->config) + reloc_offset;
- fn_r->config = (Altera_config_fn) addr;
-
- addr = (ulong) (fn->status) + reloc_offset;
- fn_r->status = (Altera_status_fn) addr;
-
- addr = (ulong) (fn->done) + reloc_offset;
- fn_r->done = (Altera_done_fn) addr;
-
- addr = (ulong) (fn->write) + reloc_offset;
- fn_r->write = (Altera_write_fn) addr;
-
- addr = (ulong) (fn->abort) + reloc_offset;
- fn_r->abort = (Altera_abort_fn) addr;
-
- addr = (ulong) (fn->post) + reloc_offset;
- fn_r->post = (Altera_post_fn) addr;
-
- fn_r->relocated = TRUE;
-
- } else {
- /* this table has already been moved */
- /* XXX - should check to see if the descriptor is correct */
- desc->iface_fns = fn_r;
- }
-
- ret_val = FPGA_SUCCESS;
- } else {
- printf ("%s: NULL Interface function table!\n", __FUNCTION__);
- }
-
- return ret_val;
-}
OpenPOWER on IntegriCloud