12 files changed, 119 insertions, 45 deletions

diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index c41f11d60c..a3079dbca3 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -28,11 +28,12 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <nand.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <asm/gpio.h>
 #include "qong_fpga.h"
 #include <watchdog.h>
+#include <errno.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -172,10 +173,15 @@ int board_late_init(void)
 {
 	u32 val;
 	struct pmic *p;
+	int ret;
 
-	pmic_init();
-	p = get_pmic();
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return ret;
 
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -ENODEV;
 	/* Enable RTC battery */
 	pmic_reg_read(p, REG_POWER_CTL0, &val);
 	pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 9f8bc53e71..bc60632aa0 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -30,8 +30,9 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 #include <watchdog.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
+#include <errno.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -83,10 +84,15 @@ int board_late_init(void)
 {
 	u32 val;
 	struct pmic *p;
+	int ret;
 
-	pmic_init();
-	p = get_pmic();
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return ret;
 
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -ENODEV;
 	/* Enable RTC battery */
 	pmic_reg_read(p, REG_POWER_CTL0, &val);
 	pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index a12531fb89..c835b0edeb 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -31,7 +31,7 @@
 #include <asm/arch/mx35_pins.h>
 #include <asm/arch/iomux.h>
 #include <i2c.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -207,7 +207,9 @@ int board_init(void)
 static inline int pmic_detect(void)
 {
 	unsigned int id;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	pmic_reg_read(p, REG_IDENTIFICATION, &id);
 
@@ -231,10 +233,14 @@ int board_late_init(void)
 	u8 val;
 	u32 pmic_val;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return ret;
 
-	pmic_init();
 	if (pmic_detect()) {
-		p = get_pmic();
+		p = pmic_get("FSL_PMIC");
 		mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
 					MUX_CONFIG_ALT1);
 
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 421d8c2244..5504636ddf 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -33,7 +33,7 @@
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
 #include <usb/ehci-fsl.h>
@@ -252,9 +252,15 @@ static void power_init(void)
 	unsigned int val;
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return;
 
-	pmic_init();
-	p = get_pmic();
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return;
 
 	/* Write needed to Power Gate 2 register */
 	pmic_reg_read(p, REG_POWER_MISC, &val);
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index bb4621d62e..1273501476 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -34,7 +34,7 @@
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <asm/gpio.h>
 #include <mc13892.h>
@@ -123,9 +123,15 @@ void power_init(void)
 {
 	unsigned int val;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return;
 
-	pmic_init();
-	p = get_pmic();
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return;
 
 	/* Set VDDA to 1.25V */
 	pmic_reg_read(p, REG_SW_2, &val);
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index a11e883186..f4a9b08420 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -36,7 +36,7 @@
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <asm/gpio.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <dialog_pmic.h>
 #include <fsl_pmic.h>
 #include <linux/fb.h>
@@ -344,10 +344,16 @@ static int power_init(void)
 	unsigned int val;
 	int ret = -1;
 	struct pmic *p;
+	int retval;
 
 	if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
-		pmic_dialog_init();
-		p = get_pmic();
+		retval = pmic_dialog_init(I2C_PMIC);
+		if (retval)
+			return retval;
+
+		p = pmic_get("DIALOG_PMIC");
+		if (!p)
+			return -ENODEV;
 
 		/* Set VDDA to 1.25V */
 		val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
@@ -363,8 +369,13 @@ static int power_init(void)
 	}
 
 	if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
-		pmic_init();
-		p = get_pmic();
+		retval = pmic_init(I2C_PMIC);
+		if (retval)
+			return retval;
+
+		p = pmic_get("DIALOG_PMIC");
+		if (!p)
+			return -ENODEV;
 
 		/* Set VDDGP to 1.25V for 1GHz on SW1 */
 		pmic_reg_read(p, REG_SW_0, &val);
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index c2b2823ef9..69d41db530 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -33,7 +33,7 @@
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
 
@@ -173,9 +173,15 @@ static void power_init(void)
 	unsigned int val;
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return;
 
-	pmic_init();
-	p = get_pmic();
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return;
 
 	/* Write needed to Power Gate 2 register */
 	pmic_reg_read(p, REG_POWER_MISC, &val);
diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c
index 143fcefedf..0c2cb795dd 100644
--- a/board/hale/tt01/tt01.c
+++ b/board/hale/tt01/tt01.c
@@ -25,12 +25,13 @@
 #include <common.h>
 #include <netdev.h>
 #include <command.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc13783.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
+#include <errno.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -195,14 +196,21 @@ int board_mmc_init(bd_t *bis)
 {
 	u32 val;
 	struct pmic *p;
+	int ret;
 
 	/*
 	* this is the first driver to use the pmic, so call
 	* pmic_init() here. board_late_init() is too late for
 	* the MMC driver.
 	*/
-	pmic_init();
-	p = get_pmic();
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	/* configure pins for SDHC1 only */
 	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC));
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index e8fb1ea413..71ed618c6f 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -25,10 +25,10 @@
 #include <common.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <usb/s3c_udc.h>
 #include <asm/arch/cpu.h>
-#include <max8998_pmic.h>
+#include <power/max8998_pmic.h>
 DECLARE_GLOBAL_DATA_PTR;
 
 static struct s5pc110_gpio *s5pc110_gpio;
@@ -42,8 +42,9 @@ int board_init(void)
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
 #if defined(CONFIG_PMIC)
-	pmic_init();
+	pmic_init(I2C_5);
 #endif
+
 	return 0;
 }
 
@@ -108,7 +109,9 @@ static int s5pc1xx_phy_control(int on)
 {
 	int ret;
 	static int status;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8998_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return -1;
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index e11a8922fc..e0a98901f7 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -34,9 +34,9 @@
 #include <asm/arch/mipi_dsim.h>
 #include <asm/arch/watchdog.h>
 #include <asm/arch/power.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <usb/s3c_udc.h>
-#include <max8997_pmic.h>
+#include <power/max8997_pmic.h>
 #include <libtizen.h>
 
 #include "setup.h"
@@ -69,7 +69,7 @@ int board_init(void)
 	printf("HW Revision:\t0x%x\n", board_rev);
 
 #if defined(CONFIG_PMIC)
-	pmic_init();
+	pmic_init(I2C_5);
 #endif
 
 	return 0;
@@ -238,7 +238,9 @@ static int s5pc210_phy_control(int on)
 {
 	int ret = 0;
 	u32 val = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8997_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return -1;
@@ -413,7 +415,9 @@ static void lcd_reset(void)
 static int lcd_power(void)
 {
 	int ret = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8997_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return 0;
@@ -473,7 +477,9 @@ static struct mipi_dsim_lcd_device mipi_lcd_device = {
 static int mipi_power(void)
 {
 	int ret = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8997_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return 0;
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index 90fff5cf5e..c4950ddc26 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -27,10 +27,10 @@
 #include <asm/arch/adc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <usb/s3c_udc.h>
 #include <asm/arch/cpu.h>
-#include <max8998_pmic.h>
+#include <power/max8998_pmic.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -59,7 +59,7 @@ int board_init(void)
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
 #if defined(CONFIG_PMIC)
-	pmic_init();
+	pmic_init(I2C_5);
 #endif
 
 	check_hw_revision();
@@ -112,7 +112,9 @@ static unsigned short get_adc_value(int channel)
 static int adc_power_control(int on)
 {
 	int ret;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8998_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return -1;
@@ -280,7 +282,9 @@ int board_mmc_init(bd_t *bis)
 static int s5pc210_phy_control(int on)
 {
 	int ret = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8998_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return -1;
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index abdd1aac2b..a471fec23d 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -34,7 +34,7 @@
 #include <asm/arch/sys_proto.h>
 #include <i2c.h>
 #include <mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_esdhc.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
@@ -306,9 +306,15 @@ static void power_init_mx51(void)
 {
 	unsigned int val;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return;
 
-	pmic_init();
-	p = get_pmic();
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return;
 
 	/* Write needed to Power Gate 2 register */
 	pmic_reg_read(p, REG_POWER_MISC, &val);