diff options
Diffstat (limited to 'board/syteco/zmx25/zmx25.c')
| -rw-r--r-- | board/syteco/zmx25/zmx25.c | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c new file mode 100644 index 0000000000..f0550389eb --- /dev/null +++ b/board/syteco/zmx25/zmx25.c @@ -0,0 +1,203 @@ +/* + * (c) 2011 Graf-Syteco, Matthias Weisser + * <weisserm@arcor.de> + * + * Based on tx25.c: + * (C) Copyright 2009 DENX Software Engineering + * Author: John Rigby <jrigby@gmail.com> + * + * Based on imx27lite.c: + * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net> + * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> + * And: + * RedBoot tx25_misc.c Copyright (C) 2009 Red Hat + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <mxc_gpio.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/imx25-pinmux.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init() +{ + struct iomuxc_mux_ctl *muxctl; + struct iomuxc_pad_ctl *padctl; + struct iomuxc_pad_input_select *inputselect; + u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; + u32 gpio_mux_mode1 = MX25_PIN_MUX_MODE(1); + u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); + u32 gpio_mux_mode6 = MX25_PIN_MUX_MODE(6); + u32 input_select1 = MX25_PAD_INPUT_SELECT_DAISY(1); + u32 input_select2 = MX25_PAD_INPUT_SELECT_DAISY(2); + + icache_enable(); + + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; + inputselect = (struct iomuxc_pad_input_select *)IMX_IOPADINPUTSEL_BASE; + + /* Setup of core volatage selection pin to run at 1.4V */ + writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 15), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 15), 1); + + /* Setup of input daisy chains for SD card pins*/ + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_clk); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data0); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data1); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data2); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data3); + + /* Setup of digital output for USB power and OC */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 28), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 28), 1); + + writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 18), MXC_GPIO_DIRECTION_IN); + + /* Setup of digital output control pins */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d7); /* Ouput 2 Ctrl GPIO1[6] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d6); /* Ouput 1 Stat GPIO1[31]*/ + writel(gpio_mux_mode5, &muxctl->pad_csi_d5); /* Ouput 2 Stat GPIO1[30]*/ + + writel(0, &padctl->pad_csi_d6); /* Ouput 1 Stat pull up off */ + writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ + + /* Switch both output drivers off */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 7), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 7), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 6), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 6), MXC_GPIO_DIRECTION_OUT); + + /* Setup of key input pin GPIO2[29]*/ + writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); + writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(2, 29), MXC_GPIO_DIRECTION_IN); + + /* Setup of status LED outputs */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ + + /* Switch both LEDs off */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(4, 21), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 29), MXC_GPIO_DIRECTION_OUT); + + /* Setup of CAN1 and CAN2 signals */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_b); /* CAN1 RX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_c); /* CAN2 TX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_d); /* CAN2 RX */ + + /* Setup of input daisy chains for CAN signals*/ + writel(input_select1, &inputselect->can1_ipp_ind_canrx); /* CAN1 RX */ + writel(input_select1, &inputselect->can2_ipp_ind_canrx); /* CAN2 RX */ + + /* Setup of I2C3 signals */ + writel(gpio_mux_mode1, &muxctl->pad_cspi1_ss1); /* I2C3 SDA */ + writel(gpio_mux_mode1, &muxctl->pad_gpio_e); /* I2C3 SCL */ + + /* Setup of input daisy chains for I2C3 signals*/ + writel(input_select1, &inputselect->i2c3_ipp_sda_in); /* I2C3 SDA */ + writel(input_select2, &inputselect->i2c3_ipp_scl_in); /* I2C3 SCL */ + + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_ZMX25; + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int board_late_init(void) +{ + const char *e; + +#ifdef CONFIG_FEC_MXC + struct iomuxc_mux_ctl *muxctl; + struct iomuxc_pad_ctl *padctl; + u32 gpio_mux_mode2 = MX25_PIN_MUX_MODE(2); + u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); + + /* + * fec pin init is generic + */ + mx25_fec_init_pins(); + + /* + * Set up LAN-RESET and FEC_RX_ERR + * + * LAN-RESET: GPIO3[16] is ALT 5 mode of pin U20 + * FEC_RX_ERR: FEC_RX_ERR is ALT 2 mode of pin R2 + */ + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; + + writel(gpio_mux_mode5, &muxctl->pad_upll_bypclk); + writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); + + /* assert PHY reset (low) */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 16), MXC_GPIO_DIRECTION_OUT); + + udelay(5000); + + /* deassert PHY reset */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 1); + + udelay(5000); +#endif + + e = getenv("gs_base_board"); + if (e != NULL) { + if (strcmp(e, "G283") == 0) { + int key = mxc_gpio_get(MXC_GPIO_PORT_TO_NUM(2, 29)); + + if (key) { + /* Switch on both LEDs to inidcate boot mode */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + + setenv("preboot", "run gs_slow_boot"); + } else + setenv("preboot", "run gs_fast_boot"); + } + } + + return 0; +} + +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, + PHYS_SDRAM_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = gd->ram_size; +} |
