diff options
Diffstat (limited to 'board/samsung/smdkc100/mem_setup.S')
| -rw-r--r-- | board/samsung/smdkc100/mem_setup.S | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/board/samsung/smdkc100/mem_setup.S b/board/samsung/smdkc100/mem_setup.S new file mode 100644 index 0000000000..94a701d428 --- /dev/null +++ b/board/samsung/smdkc100/mem_setup.S @@ -0,0 +1,197 @@ +/* + * Originates from Samsung's u-boot 1.1.6 port to S5PC1xx + * + * Copyright (C) 2009 Samsung Electrnoics + * Inki Dae <inki.dae@samsung.com> + * Heungjun Kim <riverful.kim@samsung.com> + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + ldr r6, =S5PC100_DMC_BASE @ 0xE6000000 + + /* DLL parameter setting */ + ldr r1, =0x50101000 + str r1, [r6, #0x018] @ PHYCONTROL0 + ldr r1, =0xf4 + str r1, [r6, #0x01C] @ PHYCONTROL1 + ldr r1, =0x0 + str r1, [r6, #0x020] @ PHYCONTROL2 + + /* DLL on */ + ldr r1, =0x50101002 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL start */ + ldr r1, =0x50101003 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* Force value locking for DLL off */ + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL off */ + ldr r1, =0x50101001 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* auto refresh off */ + ldr r1, =0xff001010 + str r1, [r6, #0x000] @ CONCONTROL + + /* + * Burst Length 4, 2 chips, 32-bit, LPDDR + * OFF: dynamic self refresh, force precharge, dynamic power down off + */ + ldr r1, =0x00212100 + str r1, [r6, #0x004] @ MEMCONTROL + + /* + * Note: + * If Bank0 has OneDRAM we place it at 0x2800'0000 + * So finally Bank1 should address start at at 0x2000'0000 + */ + mov r4, #0x0 + +swap_memory: + /* + * Bank0 + * 0x30 -> 0x30000000 + * 0xf8 -> 0x37FFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r1, =0x30f80222 + /* if r4 is 1, swap the bank */ + cmp r4, #0x1 + orreq r1, r1, #0x08000000 + str r1, [r6, #0x008] @ MEMCONFIG0 + + /* + * Bank1 + * 0x38 -> 0x38000000 + * 0xf8 -> 0x3fFFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r1, =0x38f80222 + /* if r4 is 1, swap the bank */ + cmp r4, #0x1 + biceq r1, r1, #0x08000000 + str r1, [r6, #0x00c] @ MEMCONFIG1 + + ldr r1, =0x20000000 + str r1, [r6, #0x014] @ PRECHCONFIG + + /* + * FIXME: Please verify these values + * 7.8us * 166MHz %LE %LONG1294(0x50E) + * 7.8us * 133MHz %LE %LONG1038(0x40E), + * 7.8us * 100MHz %LE %LONG780(0x30C), + * 7.8us * 20MHz %LE %LONG156(0x9C), + * 7.8us * 10MHz %LE %LONG78(0x4E) + */ + ldr r1, =0x0000050e + str r1, [r6, #0x030] @ TIMINGAREF + + /* 166 MHz */ + ldr r1, =0x0c233287 + str r1, [r6, #0x034] @ TIMINGROW + + /* twtr=3 twr=2 trtp=3 cl=3 wl=3 rl=3 */ + ldr r1, =0x32330303 + str r1, [r6, #0x038] @ TIMINGDATA + + /* tfaw=4 sxsr=0x14 txp=0x14 tcke=3 tmrd=3 */ + ldr r1, =0x04141433 + str r1, [r6, #0x03C] @ TIMINGPOWER + + /* chip0 Deselect */ + ldr r1, =0x07000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 PALL */ + ldr r1, =0x01000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 REFA */ + ldr r1, =0x05000000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip0 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00000032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 Deselect */ + ldr r1, =0x07100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 PALL */ + ldr r1, =0x01100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 REFA */ + ldr r1, =0x05100000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip1 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00100032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* auto refresh on */ + ldr r1, =0xff002030 + str r1, [r6, #0x000] @ CONCONTROL + + /* PwrdnConfig */ + ldr r1, =0x00100002 + str r1, [r6, #0x028] @ PWRDNCONFIG + + /* BL%LE %LONG */ + ldr r1, =0xff212100 + str r1, [r6, #0x004] @ MEMCONTROL + + + /* Try to test memory area */ + cmp r4, #0x1 + beq 1f + + mov r4, #0x1 + ldr r1, =0x37ffff00 + str r4, [r1] + str r4, [r1, #0x4] @ dummy write + ldr r0, [r1] + cmp r0, r4 + bne swap_memory + +1: + mov pc, lr + + .ltorg |
