1 files changed, 0 insertions, 104 deletions
diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c
deleted file mode 100644
index d9752096c1..0000000000
--- a/board/qi/qi_lb60/qi_lb60.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Authors: Xiangfu Liu <xiangfu@sharism.cc>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 3 of the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/jz4740.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void gpio_init(void)
-{
-	unsigned int i;
-
-	/* Initialize NAND Flash Pins */
-	__gpio_as_nand();
-
-	/* Initialize SDRAM pins */
-	__gpio_as_sdram_16bit_4720();
-
-	/* Initialize LCD pins */
-	__gpio_as_lcd_18bit();
-
-	/* Initialize MSC pins */
-	__gpio_as_msc();
-
-	/* Initialize Other pins */
-	for (i = 0; i < 7; i++) {
-		__gpio_as_input(GPIO_KEYIN_BASE + i);
-		__gpio_enable_pull(GPIO_KEYIN_BASE + i);
-	}
-
-	for (i = 0; i < 8; i++) {
-		__gpio_as_output(GPIO_KEYOUT_BASE + i);
-		__gpio_clear_pin(GPIO_KEYOUT_BASE + i);
-	}
-
-	__gpio_as_input(GPIO_KEYIN_8);
-	__gpio_enable_pull(GPIO_KEYIN_8);
-
-	/* enable the TP4, TP5 as UART0 */
-	__gpio_jtag_to_uart0();
-
-	__gpio_as_output(GPIO_AUDIO_POP);
-	__gpio_set_pin(GPIO_AUDIO_POP);
-
-	__gpio_as_output(GPIO_LCD_CS);
-	__gpio_clear_pin(GPIO_LCD_CS);
-
-	__gpio_as_output(GPIO_AMP_EN);
-	__gpio_clear_pin(GPIO_AMP_EN);
-
-	__gpio_as_output(GPIO_SDPW_EN);
-	__gpio_disable_pull(GPIO_SDPW_EN);
-	__gpio_clear_pin(GPIO_SDPW_EN);
-
-	__gpio_as_input(GPIO_SD_DETECT);
-	__gpio_disable_pull(GPIO_SD_DETECT);
-
-	__gpio_as_input(GPIO_USB_DETECT);
-	__gpio_enable_pull(GPIO_USB_DETECT);
-}
-
-static void cpm_init(void)
-{
-	struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE;
-	uint32_t reg = readl(&cpm->clkgr);
-
-	reg |=	CPM_CLKGR_IPU |
-		CPM_CLKGR_CIM |
-		CPM_CLKGR_I2C |
-		CPM_CLKGR_SSI |
-		CPM_CLKGR_UART1 |
-		CPM_CLKGR_SADC |
-		CPM_CLKGR_UHC |
-		CPM_CLKGR_UDC |
-		CPM_CLKGR_AIC1;
-
-	writel(reg, &cpm->clkgr);
-}
-
-int board_early_init_f(void)
-{
-	gpio_init();
-	cpm_init();
-	calc_clocks();	/* calc the clocks */
-	rtc_init();	/* init rtc on any reset */
-
-	return 0;
-}
-
-/* U-Boot common routines */
-int checkboard(void)
-{
-	printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %ld MHz)\n",
-	       gd->cpu_clk / 1000000);
-
-	return 0;
-}