1 files changed, 0 insertions, 140 deletions
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
deleted file mode 100644
index 197ff3ef31..0000000000
--- a/board/pxa255_idp/pxa_idp.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2004
- * BEC Systems <http://bec-systems.com>
- * Cliff Brake <cliff.brake@gmail.com>
- * Support for Accelent/Vibren PXA255 IDP
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	/* arch number of Lubbock-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_PXA_IDP;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	/* turn on serial ports */
-	*(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C0002c) = 0x13;
-
-	/* set PWM for LCD */
-	/* a value that works is 60Hz, 77% duty cycle */
-	writel(readl(CKEN) | CKEN0_PWM0, CKEN);
-	writel(0x3f, PWM_CTRL0);
-	writel(0x3ff, PWM_PERVAL0);
-	writel(792, PWM_PWDUTY0);
-
-	/* clear reset to AC97 codec */
-	writel(readl(CKEN) | CKEN2_AC97, CKEN);
-	writel(GCR_COLD_RST, GCR);
-
-	/* enable LCD backlight */
-	/* *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C00030) = 0x7; */
-
-	/* test display */
-	/* lcd_puts("This is a test\nTest #2\n"); */
-
-	return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-	pxa_mmc_register(0);
-	return 0;
-}
-#endif
-
-int board_late_init(void)
-{
-	setenv("stdout", "serial");
-	setenv("stderr", "serial");
-	return 0;
-}
-
-int dram_init(void)
-{
-	pxa2xx_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef DEBUG_BLINKC_ENABLE
-
-void delay_c(void)
-{
-	/* reset OSCR to 0 */
-	writel(0, OSCR);
-	while (readl(OSCR) > 0x10000)
-		;
-
-	while (readl(OSCR) < 0xd4000)
-		;
-}
-
-void blink_c(void)
-{
-	int led_bit = (1<<10);
-
-	writel(led_bit, GPDR0);
-	writel(led_bit, GPCR0);
-	delay_c();
-	writel(led_bit, GPSR0);
-	delay_c();
-	writel(led_bit, GPCR0);
-}
-
-int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	printf("IDPCMD started\n");
-	return 0;
-}
-
-U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
-	   "custom IDP command",
-	   "no args at this time"
-);
-
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif