summaryrefslogtreecommitdiffstats
path: root/board/mx1ads/syncflash.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/mx1ads/syncflash.c')
-rw-r--r--board/mx1ads/syncflash.c307
1 files changed, 0 insertions, 307 deletions
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
deleted file mode 100644
index 5d685338fb..0000000000
--- a/board/mx1ads/syncflash.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * board/mx1ads/syncflash.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-/*#include <mc9328.h>*/
-#include <asm/arch/imx-regs.h>
-
-typedef unsigned long * p_u32;
-
-/* 4Mx16x2 IAM=0 CSD1 */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Following Setting is for CSD1 */
-#define SFCTL 0x00221004
-#define reg_SFCTL __REG(SFCTL)
-
-#define SYNCFLASH_A10 (0x00100000)
-
-#define CMD_NORMAL (0x81020300) /* Normal Mode */
-#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */
-#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */
-#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */
-#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */
-#define CMD_PROGRAM (CMD_NORMAL + 0x70000000)
-
-#define MODE_REG_VAL (CONFIG_SYS_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */
-
-/* LCR Command */
-#define LCR_READSTATUS (0x0001C000) /* 0x70 */
-#define LCR_ERASE_CONFIRM (0x00008000) /* 0x20 */
-#define LCR_ERASE_NVMODE (0x0000C000) /* 0x30 */
-#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */
-#define LCR_SR_CLEAR (0x00014000) /* 0x50 */
-
-/* Get Status register */
-u32 SF_SR(void) {
- u32 tmp;
-
- reg_SFCTL = CMD_PROGRAM;
- tmp = __REG(CONFIG_SYS_FLASH_BASE);
-
- reg_SFCTL = CMD_NORMAL;
-
- reg_SFCTL = CMD_LCR; /* Activate LCR Mode */
- __REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR);
-
- return tmp;
-}
-
-/* check if SyncFlash is ready */
-u8 SF_Ready(void) {
- u32 tmp;
-
- tmp = SF_SR();
-
- if ((tmp & 0x00800000) && (tmp & 0x001C0000)) {
- printf ("SyncFlash Error code %08x\n",tmp);
- };
-
- if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
- printf ("SyncFlash Error code %08x\n",tmp);
- };
-
- if (tmp == 0x00800080) /* Test Bit 7 of SR */
- return 1;
- else
- return 0;
-}
-
-/* Issue the precharge all command */
-void SF_PrechargeAll(void) {
-
- /* Set Precharge Command */
- reg_SFCTL = CMD_PREC;
- /* Issue Precharge All Command */
- __REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10);
-}
-
-/* set SyncFlash to normal mode */
-void SF_Normal(void) {
-
- SF_PrechargeAll();
-
- reg_SFCTL = CMD_NORMAL;
-}
-
-/* Erase SyncFlash */
-void SF_Erase(u32 RowAddress) {
-
- reg_SFCTL = CMD_NORMAL;
- __REG(RowAddress);
-
- reg_SFCTL = CMD_PREC;
- __REG(RowAddress);
-
- reg_SFCTL = CMD_LCR; /* Set LCR mode */
- __REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */
-
- reg_SFCTL = CMD_NORMAL; /* return to Normal mode */
- __REG(RowAddress) = 0xD0D0D0D0; /* Confirm */
-
- while(!SF_Ready());
-}
-
-void SF_NvmodeErase(void) {
- SF_PrechargeAll();
-
- reg_SFCTL = CMD_LCR; /* Set to LCR mode */
- __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */
-
- reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
- __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */
-
- while(!SF_Ready());
-}
-
-void SF_NvmodeWrite(void) {
- SF_PrechargeAll();
-
- reg_SFCTL = CMD_LCR; /* Set to LCR mode */
- __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */
-
- reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
- __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */
-}
-
-/****************************************************************************************/
-
-ulong flash_init(void) {
- int i, j;
-
-/* Turn on CSD1 for negating RESETSF of SyncFLash */
-
- reg_SFCTL |= 0x80000000; /* enable CSD1 for SyncFlash */
- udelay(200);
-
- reg_SFCTL = CMD_LMR; /* Set Load Mode Register Command */
- __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */
-
- SF_Normal();
-
- i = 0;
-
- flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC;
-
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE + j * 0x00100000;
- }
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return FLASH_BANK_SIZE;
-}
-
-void flash_print_info (flash_info_t *info) {
-
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (FLASH_MAN_MT & FLASH_VENDMASK):
- printf("Micron: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
- printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- return;
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses: ");
-
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0)
- printf ("\n ");
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------*/
-
-int flash_erase (flash_info_t *info, int s_first, int s_last) {
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
-
-/* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last))
- return ERR_INVAL;
-
- if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK))
- return ERR_UNKNOWN_FLASH_VENDOR;
-
- prot = 0;
-
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
- prot++;
- }
-
- if (prot) {
- printf("protected!\n");
- return ERR_PROTECTED;
- }
-/*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-
- cflag = icache_status();
- icache_disable();
- iflag = disable_interrupts();
-
-/* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc(); sect++) {
-
- printf("Erasing sector %2d ... ", sect);
-
-/* arm simple, non interrupt dependent timer */
-
- get_timer(0);
-
- SF_NvmodeErase();
- SF_NvmodeWrite();
-
- SF_Erase(CONFIG_SYS_FLASH_BASE + (0x0100000 * sect));
- SF_Normal();
-
- printf("ok.\n");
- }
-
- if (ctrlc())
- printf("User Interrupt!\n");
-
- if (iflag)
- enable_interrupts();
-
- if (cflag)
- icache_enable();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
- int i;
-
- for(i = 0; i < cnt; i += 4) {
-
- SF_PrechargeAll();
-
- reg_SFCTL = CMD_PROGRAM; /* Enter SyncFlash Program mode */
- __REG(addr + i) = __REG((u32)src + i);
-
- while(!SF_Ready());
- }
-
- SF_Normal();
-
- return ERR_OK;
-}
OpenPOWER on IntegriCloud