diff options
Diffstat (limited to 'board/freescale/p1010rdb')
| -rw-r--r-- | board/freescale/p1010rdb/README | 3 |
1 files changed, 0 insertions, 3 deletions
diff --git a/board/freescale/p1010rdb/README b/board/freescale/p1010rdb/README index 022c023ae2..7f18aaa1b2 100644 --- a/board/freescale/p1010rdb/README +++ b/board/freescale/p1010rdb/README @@ -146,7 +146,6 @@ Build and burn u-boot to NAND flash 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on. - Build and burn u-boot to SPI flash ================================== 1. Build u-boot-spi.bin image @@ -166,7 +165,6 @@ Build and burn u-boot to SPI flash 3. Check SW4[1:4]= 0110 and SW6[4]=0, then power on. - CPLD POR setting registers ========================== 1. Set POR switch selection register (addr 0xFFB00011) to 0. @@ -197,7 +195,6 @@ Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz): => reset - Boot Linux from network using TFTP on P1010RDB ============================================== Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area. |
