diff options
Diffstat (limited to 'board/esd/tasreg')
| -rw-r--r-- | board/esd/tasreg/flash.c | 8 | ||||
| -rw-r--r-- | board/esd/tasreg/tasreg.c | 16 |
2 files changed, 12 insertions, 12 deletions
diff --git a/board/esd/tasreg/flash.c b/board/esd/tasreg/flash.c index 13c07d2d33..ce905e94c0 100644 --- a/board/esd/tasreg/flash.c +++ b/board/esd/tasreg/flash.c @@ -45,13 +45,13 @@ unsigned long flash_init (void) int i; /* Init: no FLASHes known */ - for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { + for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; } /* Static FLASH Bank configuration here - FIXME XXX */ - size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]); + size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); if (flash_info[0].flash_id == FLASH_UNKNOWN) { printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", @@ -65,8 +65,8 @@ unsigned long flash_init (void) /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE+CFG_MONITOR_LEN-1, + CONFIG_SYS_FLASH_BASE, + CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-1, &flash_info[0]); flash_info[0].size = size_b0; diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c index fabb7464fd..64e6d63296 100644 --- a/board/esd/tasreg/tasreg.c +++ b/board/esd/tasreg/tasreg.c @@ -40,8 +40,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len); /* predefine these here for FPGA programming (before including fpga.c) */ #define SET_FPGA(data) mbar2_writeLong(MCFSIM_GPIO1_OUT, data) -#define FPGA_DONE_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CFG_FPGA_DONE) -#define FPGA_INIT_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CFG_FPGA_INIT) +#define FPGA_DONE_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_DONE) +#define FPGA_INIT_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_INIT) #define FPGA_PROG_ACTIVE_HIGH /* on this platform is PROG active high! */ #define out32(a,b) /* nothing to do (gpio already configured) */ @@ -70,7 +70,7 @@ int checkboard (void) { /* * Set LED on */ - val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED; + val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED; mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */ return 0; @@ -85,13 +85,13 @@ phys_size_t initdram (int board_type) { * RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1 */ -#ifdef CFG_FAST_CLK +#ifdef CONFIG_SYS_FAST_CLK /* * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K) * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39 */ mbar_writeShort(MCFSIM_DCR, 0x8239); -#elif CFG_PLL_BYPASS +#elif CONFIG_SYS_PLL_BYPASS /* * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K) * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02 @@ -129,7 +129,7 @@ phys_size_t initdram (int board_type) { mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */ *((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */ - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; }; @@ -150,8 +150,8 @@ int misc_init_r (void) int i; uchar buf[8]; - dst = malloc(CFG_FPGA_MAX_SIZE); - if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { + dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); + if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { printf ("GUNZIP ERROR - must RESET board to recover\n"); do_reset (NULL, 0, 0, NULL); } |
