1 files changed, 0 insertions, 91 deletions
diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
deleted file mode 100644
index c34bde4fa6..0000000000
--- a/board/davinci/dvevm/dvevm.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/davinci_misc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* arch number of the board */
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	/* Configure AEMIF pins (although this should be configured at boot time
-	 * with pull-up/pull-down resistors) */
-	REG(PINMUX0) = 0x00000c1f;
-
-	davinci_errata_workarounds();
-
-	/* Power on required peripherals */
-	lpsc_on(DAVINCI_LPSC_GPIO);
-	lpsc_on(DAVINCI_LPSC_USB);
-
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-	/* Powerup the DSP */
-	dsp_on();
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-	davinci_enable_uart0();
-	davinci_enable_emac();
-	davinci_enable_i2c();
-
-	lpsc_on(DAVINCI_LPSC_TIMER1);
-	timer_init();
-
-	return(0);
-}
-
-int misc_init_r(void)
-{
-	uint8_t video_mode;
-	uint8_t eeprom_enetaddr[6];
-
-	/* Read Ethernet MAC address from EEPROM if available. */
-	if (dvevm_read_mac_address(eeprom_enetaddr))
-		davinci_sync_env_enetaddr(eeprom_enetaddr);
-
-	i2c_read(0x39, 0x00, 1, &video_mode, 1);
-
-	setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc"));
-
-	return(0);
-}
-
-#ifdef CONFIG_USB_DAVINCI
-
-/* IO Expander I2C address and USB VBUS enable mask */
-#define IOEXP_I2C_ADDR 0x3A
-#define IOEXP_VBUSEN_MASK 1
-
-/*
- * This function enables USB VBUS by writting to IO expander using I2C.
- * Note that the I2C is already initialized at this stage. This
- * function is used by davinci specific USB wrapper code.
- */
-void enable_vbus(void)
-{
-	uchar data;  /* IO Expander data to enable VBUS */
-
-	/* Write to IO expander to enable VBUS */
-	i2c_read(IOEXP_I2C_ADDR, 0, 0, &data, 1);
-	data &= ~IOEXP_VBUSEN_MASK;
-	i2c_write(IOEXP_I2C_ADDR, 0, 0, &data, 1);
-}
-#endif