diff options
Diffstat (limited to 'board/davedenx/qong/qong.c')
| -rw-r--r-- | board/davedenx/qong/qong.c | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c new file mode 100644 index 0000000000..13b369938f --- /dev/null +++ b/board/davedenx/qong/qong.c @@ -0,0 +1,168 @@ +/* + * + * (c) 2009 Emcraft Systems, Ilya Yanok <yanok@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#include <netdev.h> +#include <asm/arch/mx31.h> +#include <asm/arch/mx31-regs.h> +#include "qong_fpga.h" + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + + return 0; +} + +int board_init (void) +{ + /* Chip selects */ + /* CS0: Nor Flash #0 - it must be init'ed when executing from DDR */ + /* Assumptions: HCLK = 133 MHz, tACC = 130ns */ + __REG(CSCR_U(0)) = ((0 << 31) | /* SP */ + (0 << 30) | /* WP */ + (0 << 28) | /* BCD */ + (0 << 24) | /* BCS */ + (0 << 22) | /* PSZ */ + (0 << 21) | /* PME */ + (0 << 20) | /* SYNC */ + (0 << 16) | /* DOL */ + (3 << 14) | /* CNC */ + (21 << 8) | /* WSC */ + (0 << 7) | /* EW */ + (0 << 4) | /* WWS */ + (6 << 0) /* EDC */ + ); + + __REG(CSCR_L(0)) = ((2 << 28) | /* OEA */ + (1 << 24) | /* OEN */ + (3 << 20) | /* EBWA */ + (3 << 16) | /* EBWN */ + (1 << 12) | /* CSA */ + (1 << 11) | /* EBC */ + (5 << 8) | /* DSZ */ + (1 << 4) | /* CSN */ + (0 << 3) | /* PSR */ + (0 << 2) | /* CRE */ + (0 << 1) | /* WRAP */ + (1 << 0) /* CSEN */ + ); + + __REG(CSCR_A(0)) = ((2 << 28) | /* EBRA */ + (1 << 24) | /* EBRN */ + (2 << 20) | /* RWA */ + (2 << 16) | /* RWN */ + (0 << 15) | /* MUM */ + (0 << 13) | /* LAH */ + (2 << 10) | /* LBN */ + (0 << 8) | /* LBA */ + (0 << 6) | /* DWW */ + (0 << 4) | /* DCT */ + (0 << 3) | /* WWU */ + (0 << 2) | /* AGE */ + (0 << 1) | /* CNC2 */ + (0 << 0) /* FCE */ + ); + +#ifdef CONFIG_QONG_FPGA + /* CS1: FPGA/Network Controller/GPIO */ + /* 16-bit, no DTACK */ + __REG(CSCR_U(1)) = 0x00000A01; + __REG(CSCR_L(1)) = 0x20040501; + __REG(CSCR_A(1)) = 0x04020C00; + + /* setup pins for FPGA */ + mx31_gpio_mux(IOMUX_MODE(0x76, MUX_CTL_GPIO)); + mx31_gpio_mux(IOMUX_MODE(0x7e, MUX_CTL_GPIO)); + mx31_gpio_mux(IOMUX_MODE(0x91, MUX_CTL_OUT_FUNC | MUX_CTL_IN_GPIO)); + mx31_gpio_mux(IOMUX_MODE(0x92, MUX_CTL_GPIO)); + mx31_gpio_mux(IOMUX_MODE(0x93, MUX_CTL_GPIO)); +#endif + + /* setup pins for UART1 */ + mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); + mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); + mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); + mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); + + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_QONG; + gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ + + return 0; +} + +int checkboard (void) +{ + printf("Board: DAVE/DENX QongEVB-LITE\n"); + return 0; +} + +int misc_init_r (void) +{ +#ifdef CONFIG_QONG_FPGA + u32 tmp; + + /* FPGA reset */ + /* rstn = 0 */ + tmp = __REG(GPIO2_BASE + GPIO_DR); + tmp &= (~(1 << QONG_FPGA_RST_PIN)); + __REG(GPIO2_BASE + GPIO_DR) = tmp; + /* set the GPIO as output */ + tmp = __REG(GPIO2_BASE + GPIO_GDIR); + tmp |= (1 << QONG_FPGA_RST_PIN); + __REG(GPIO2_BASE + GPIO_GDIR) = tmp; + /* wait */ + udelay(30); + /* rstn = 1 */ + tmp = __REG(GPIO2_BASE + GPIO_DR); + tmp |= (1 << QONG_FPGA_RST_PIN); + __REG(GPIO2_BASE + GPIO_DR) = tmp; + /* set interrupt pin as input */ + __REG(GPIO2_BASE + GPIO_GDIR) = tmp | (1 << QONG_FPGA_IRQ_PIN); + /* wait while the FPGA starts */ + udelay(300); + + tmp = *(volatile u32*)QONG_FPGA_CTRL_VERSION; + printf("FPGA: "); + printf("version register = %u.%u.%u\n", + (tmp & 0xF000) >> 12, (tmp & 0x0F00) >> 8, tmp & 0x00FF); +#endif + + return 0; +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_DNET) + return dnet_eth_initialize(0, (void *)CONFIG_DNET_BASE, -1); +#else + return 0; +#endif +} + |
