diff options
Diffstat (limited to 'board/bf537-stamp')
| -rw-r--r-- | board/bf537-stamp/Makefile | 7 | ||||
| -rw-r--r-- | board/bf537-stamp/config.mk | 7 | ||||
| -rw-r--r-- | board/bf537-stamp/nand.c | 4 | ||||
| -rw-r--r-- | board/bf537-stamp/u-boot.lds.S | 19 |
4 files changed, 23 insertions, 14 deletions
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index e5481bfc55..e5ef9af5c5 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -35,12 +35,11 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -u-boot.lds: u-boot.lds.S - $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp - mv -f $@.tmp $@ +$(obj)u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@ clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk index 1b87d53dd6..719b97e254 100644 --- a/board/bf537-stamp/config.mk +++ b/board/bf537-stamp/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -24,6 +26,9 @@ # This is not actually used for Blackfin boards so do not change it #TEXT_BASE = do-not-use-me +LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds + # Set some default LDR flags based on boot mode. -LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 +LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c index c597f2db1e..20a7d0ef4c 100644 --- a/board/bf537-stamp/nand.c +++ b/board/bf537-stamp/nand.c @@ -87,7 +87,7 @@ int bfin_device_ready(struct mtd_info *mtd) * Members with a "?" were not set in the merged testing-NAND branch, * so they are not set here either. */ -void board_nand_init(struct nand_chip *nand) +int board_nand_init(struct nand_chip *nand) { *PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY; *PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY; @@ -97,5 +97,7 @@ void board_nand_init(struct nand_chip *nand) nand->ecc.mode = NAND_ECC_SOFT; nand->dev_ready = bfin_device_ready; nand->chip_delay = 30; + + return 0; } #endif diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S index 187309f3fc..76daa75c0d 100644 --- a/board/bf537-stamp/u-boot.lds.S +++ b/board/bf537-stamp/u-boot.lds.S @@ -28,6 +28,8 @@ #include <config.h> #include <asm/blackfin.h> #undef ALIGN +#undef ENTRY +#undef bfin /* If we don't actually load anything into L1 data, this will avoid * a syntax error. If we do actually load something into L1 data, @@ -50,11 +52,12 @@ MEMORY l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE } +ENTRY(_start) SECTIONS { .text : { - cpu/blackfin/start.o (.text) + cpu/blackfin/start.o (.text .text.*) #ifdef ENV_IS_EMBEDDED /* WARNING - the following is hand-optimized to fit within @@ -63,18 +66,18 @@ SECTIONS * it linked after the configuration sector. */ - cpu/blackfin/traps.o (.text) - cpu/blackfin/interrupt.o (.text) - cpu/blackfin/serial.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) + cpu/blackfin/traps.o (.text .text.*) + cpu/blackfin/interrupt.o (.text .text.*) + cpu/blackfin/serial.o (.text .text.*) + common/dlmalloc.o (.text .text.*) + lib_generic/crc32.o (.text .text.*) . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.text) + common/env_embedded.o (.text .text.*) #endif __initcode_start = .; - cpu/blackfin/initcode.o (.text) + cpu/blackfin/initcode.o (.text .text.*) __initcode_end = .; *(.text .text.*) |
