diff options
Diffstat (limited to 'arch/m68k/cpu/mcf5227x/cpu_init.c')
| -rw-r--r-- | arch/m68k/cpu/mcf5227x/cpu_init.c | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/arch/m68k/cpu/mcf5227x/cpu_init.c b/arch/m68k/cpu/mcf5227x/cpu_init.c new file mode 100644 index 0000000000..beb78f5839 --- /dev/null +++ b/arch/m68k/cpu/mcf5227x/cpu_init.c @@ -0,0 +1,206 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> + +#include <asm/immap.h> +#include <asm/rtc.h> + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + +#if !defined(CONFIG_CF_SBF) + /* Workaround, must place before fbcs */ + pll->psr = 0x12; + + scm1->mpr = 0x77777777; + scm1->pacra = 0; + scm1->pacrb = 0; + scm1->pacrc = 0; + scm1->pacrd = 0; + scm1->pacre = 0; + scm1->pacrf = 0; + scm1->pacrg = 0; + scm1->pacri = 0; + +#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ + && defined(CONFIG_SYS_CS0_CTRL)) + fbcs->csar0 = CONFIG_SYS_CS0_BASE; + fbcs->cscr0 = CONFIG_SYS_CS0_CTRL; + fbcs->csmr0 = CONFIG_SYS_CS0_MASK; +#endif +#endif /* CONFIG_CF_SBF */ + +#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ + && defined(CONFIG_SYS_CS1_CTRL)) + fbcs->csar1 = CONFIG_SYS_CS1_BASE; + fbcs->cscr1 = CONFIG_SYS_CS1_CTRL; + fbcs->csmr1 = CONFIG_SYS_CS1_MASK; +#endif + +#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ + && defined(CONFIG_SYS_CS2_CTRL)) + fbcs->csar2 = CONFIG_SYS_CS2_BASE; + fbcs->cscr2 = CONFIG_SYS_CS2_CTRL; + fbcs->csmr2 = CONFIG_SYS_CS2_MASK; +#endif + +#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ + && defined(CONFIG_SYS_CS3_CTRL)) + fbcs->csar3 = CONFIG_SYS_CS3_BASE; + fbcs->cscr3 = CONFIG_SYS_CS3_CTRL; + fbcs->csmr3 = CONFIG_SYS_CS3_MASK; +#endif + +#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ + && defined(CONFIG_SYS_CS4_CTRL)) + fbcs->csar4 = CONFIG_SYS_CS4_BASE; + fbcs->cscr4 = CONFIG_SYS_CS4_CTRL; + fbcs->csmr4 = CONFIG_SYS_CS4_MASK; +#endif + +#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \ + && defined(CONFIG_SYS_CS5_CTRL)) + fbcs->csar5 = CONFIG_SYS_CS5_BASE; + fbcs->cscr5 = CONFIG_SYS_CS5_CTRL; + fbcs->csmr5 = CONFIG_SYS_CS5_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_i2c = GPIO_PAR_I2C_SCL_SCL | GPIO_PAR_I2C_SDA_SDA; +#endif + + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ +#ifdef CONFIG_MCFRTC + volatile rtc_t *rtc = (volatile rtc_t *)(CONFIG_SYS_MCFRTC_BASE); + volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended; + + rtcex->gocu = (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xFFFF; + rtcex->gocl = CONFIG_SYS_RTC_OSCILLATOR & 0xFFFF; +#endif + + return (0); +} + +void uart_port_conf(int port) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (port) { + case 0: + gpio->par_uart &= + (GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK); + gpio->par_uart |= + (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); + break; + case 1: + gpio->par_uart &= + (GPIO_PAR_UART_U1TXD_UNMASK & GPIO_PAR_UART_U1RXD_UNMASK); + gpio->par_uart |= + (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); + break; + case 2: + gpio->par_dspi &= + (GPIO_PAR_DSPI_SIN_UNMASK & GPIO_PAR_DSPI_SOUT_UNMASK); + gpio->par_dspi = + (GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD); + break; + } +} + +#ifdef CONFIG_CF_DSPI +void cfspi_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + gpio->par_dspi = + GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | + GPIO_PAR_DSPI_SCK_SCK; +} + +int cfspi_claim_bus(uint bus, uint cs) +{ + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if ((dspi->sr & DSPI_SR_TXRXS) != DSPI_SR_TXRXS) + return -1; + + /* Clear FIFO and resume transfer */ + dspi->mcr &= ~(DSPI_MCR_CTXF | DSPI_MCR_CRXF); + + switch (cs) { + case 0: + gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_UNMASK; + gpio->par_dspi |= GPIO_PAR_DSPI_PCS0_PCS0; + break; + case 2: + gpio->par_timer &= GPIO_PAR_TIMER_T2IN_UNMASK; + gpio->par_timer |= GPIO_PAR_TIMER_T2IN_DSPIPCS2; + break; + } + + return 0; +} + +void cfspi_release_bus(uint bus, uint cs) +{ + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + dspi->mcr &= ~(DSPI_MCR_CTXF | DSPI_MCR_CRXF); /* Clear FIFO */ + + switch (cs) { + case 0: + gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0; + break; + case 2: + gpio->par_timer &= GPIO_PAR_TIMER_T2IN_UNMASK; + break; + } +} +#endif |
