diff options
Diffstat (limited to 'arch/blackfin')
| -rw-r--r-- | arch/blackfin/cpu/initcode.c | 43 | ||||
| -rw-r--r-- | arch/blackfin/cpu/serial.c | 12 | ||||
| -rw-r--r-- | arch/blackfin/cpu/serial1.h | 43 | ||||
| -rw-r--r-- | arch/blackfin/cpu/serial4.h | 27 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/clock.h | 74 | ||||
| -rw-r--r-- | arch/blackfin/lib/clocks.c | 12 |
6 files changed, 123 insertions, 88 deletions
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index e8ea0ba66a..5c12726d77 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -194,15 +194,8 @@ static inline void serial_init(void) #endif if (BFIN_DEBUG_EARLY_SERIAL) { - int enabled = serial_early_enabled(uart_base); - serial_early_init(uart_base); - - /* If the UART is off, that means we need to program - * the baud rate ourselves initially. - */ - if (!enabled) - serial_early_set_baud(uart_base, CONFIG_BAUDRATE); + serial_early_set_baud(uart_base, CONFIG_BAUDRATE); } } @@ -714,37 +707,29 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) __attribute__((always_inline)) static inline void update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB) { - serial_putc('a'); - /* Since we've changed the SCLK above, we may need to update * the UART divisors (UART baud rates are based on SCLK). * Do the division by hand as there are no native instructions * for dividing which means we'd generate a libgcc reference. */ - if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { - unsigned int sdivR, vcoR; - int dividend = sdivB * divB * vcoR; - int divisor = vcoB * sdivR; - unsigned int quotient; + unsigned int sdivR, vcoR; + unsigned int dividend = sdivB * divB * vcoR; + unsigned int divisor = vcoB * sdivR; + unsigned int quotient; - serial_putc('b'); + serial_putc('a'); #ifdef __ADSPBF60x__ - sdivR = bfin_read_CGU_DIV(); - sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7); - vcoR = (bfin_read_CGU_CTL() >> 8) & 0x7f; + sdivR = bfin_read_CGU_DIV(); + sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7); + vcoR = (bfin_read_CGU_CTL() >> 8) & 0x7f; #else - sdivR = bfin_read_PLL_DIV() & 0xf; - vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; + sdivR = bfin_read_PLL_DIV() & 0xf; + vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; #endif - - for (quotient = 0; dividend > 0; ++quotient) - dividend -= divisor; - serial_early_put_div(quotient - ANOMALY_05000230); - serial_putc('c'); - } - - serial_putc('d'); + quotient = early_division(dividend, divisor); + serial_early_put_div(quotient - ANOMALY_05000230); + serial_putc('c'); } __attribute__((always_inline)) static inline void diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c index 9847e9f2c5..36d2a5c8e4 100644 --- a/arch/blackfin/cpu/serial.c +++ b/arch/blackfin/cpu/serial.c @@ -195,6 +195,14 @@ static void uart_loop(uint32_t uart_base, int state) #endif +static inline void __serial_set_baud(uint32_t uart_base, uint32_t baud) +{ + uint16_t divisor = (get_uart_clk() + (baud * 8)) / (baud * 16) + - ANOMALY_05000230; + + /* Program the divisor to get the baud rate we want */ + serial_set_divisor(uart_base, divisor); +} #ifdef CONFIG_SYS_BFIN_UART static void uart_puts(uint32_t uart_base, const char *s) @@ -209,7 +217,7 @@ static int uart##n##_init(void) \ const unsigned short pins[] = { _P_UART(n, RX), _P_UART(n, TX), 0, }; \ peripheral_request_list(pins, "bfin-uart"); \ uart_init(MMR_UART(n)); \ - serial_early_set_baud(MMR_UART(n), gd->baudrate); \ + __serial_set_baud(MMR_UART(n), gd->baudrate); \ uart_lsr_clear(MMR_UART(n)); \ return 0; \ } \ @@ -221,7 +229,7 @@ static int uart##n##_uninit(void) \ \ static void uart##n##_setbrg(void) \ { \ - serial_early_set_baud(MMR_UART(n), gd->baudrate); \ + __serial_set_baud(MMR_UART(n), gd->baudrate); \ } \ \ static int uart##n##_getc(void) \ diff --git a/arch/blackfin/cpu/serial1.h b/arch/blackfin/cpu/serial1.h index a20175bc7f..52f1c62eb9 100644 --- a/arch/blackfin/cpu/serial1.h +++ b/arch/blackfin/cpu/serial1.h @@ -15,6 +15,8 @@ #ifndef __ASSEMBLY__ +#include <asm/clock.h> + #define MMR_UART(n) _PASTE_UART(n, UART, DLL) #ifdef UART_DLL # define UART0_DLL UART_DLL @@ -230,19 +232,6 @@ static inline void serial_early_do_portmux(void) } __attribute__((always_inline)) -static inline uint32_t uart_sclk(void) -{ -#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) - /* We cannot use get_sclk() early on as it uses - * caches in external memory - */ - return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV; -#else - return get_sclk(); -#endif -} - -__attribute__((always_inline)) static inline int uart_init(uint32_t uart_base) { /* always enable UART -- avoids anomalies 05000309 and 05000350 */ @@ -275,21 +264,8 @@ static inline int serial_early_uninit(uint32_t uart_base) } __attribute__((always_inline)) -static inline int serial_early_enabled(uint32_t uart_base) +static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor) { - return bfin_read(&pUART->gctl) & UCEN; -} - -__attribute__((always_inline)) -static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) -{ - /* Translate from baud into divisor in terms of SCLK. The - * weird multiplication is to make sure we over sample just - * a little rather than under sample the incoming signals. - */ - uint16_t divisor = (uart_sclk() + (baud * 8)) / (baud * 16) - - ANOMALY_05000230; - /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); SSYNC(); @@ -305,6 +281,19 @@ static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) } __attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) +{ + /* Translate from baud into divisor in terms of SCLK. The + * weird multiplication is to make sure we over sample just + * a little rather than under sample the incoming signals. + */ + uint16_t divisor = early_division(early_get_uart_clk() + (baud * 8), + baud * 16) - ANOMALY_05000230; + + serial_set_divisor(uart_base, divisor); +} + +__attribute__((always_inline)) static inline void serial_early_put_div(uint16_t divisor) { uint32_t uart_base = UART_BASE; diff --git a/arch/blackfin/cpu/serial4.h b/arch/blackfin/cpu/serial4.h index 887845c186..65483960b9 100644 --- a/arch/blackfin/cpu/serial4.h +++ b/arch/blackfin/cpu/serial4.h @@ -15,6 +15,8 @@ #ifndef __ASSEMBLY__ +#include <asm/clock.h> + #define MMR_UART(n) _PASTE_UART(n, UART, REVID) #define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) @@ -84,20 +86,6 @@ static inline void serial_early_do_portmux(void) } __attribute__((always_inline)) -static inline uint32_t uart_sclk(void) -{ -#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) - /* We cannot use get_sclk() early on as it uses caches in - * external memory - */ - return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV / - CONFIG_SCLK0_DIV; -#else - return get_sclk0(); -#endif -} - -__attribute__((always_inline)) static inline int uart_init(uint32_t uart_base) { /* always enable UART to 8-bit mode */ @@ -127,19 +115,20 @@ static inline int serial_early_uninit(uint32_t uart_base) } __attribute__((always_inline)) -static inline int serial_early_enabled(uint32_t uart_base) +static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor) { - return bfin_read(&pUART->control) & UEN; + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->clock, divisor); + SSYNC(); } __attribute__((always_inline)) static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) { - uint32_t divisor = uart_sclk() / (baud * 16); + uint16_t divisor = early_division(early_get_uart_clk(), baud * 16); /* Program the divisor to get the baud rate we want */ - bfin_write(&pUART->clock, divisor); - SSYNC(); + serial_set_divisor(uart_base, divisor); } __attribute__((always_inline)) diff --git a/arch/blackfin/include/asm/clock.h b/arch/blackfin/include/asm/clock.h new file mode 100644 index 0000000000..df6cd68171 --- /dev/null +++ b/arch/blackfin/include/asm/clock.h @@ -0,0 +1,74 @@ + +/* + * Copyright (C) 2012 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef __CLOCK_H__ +#define __CLOCK_H__ + +#include <asm/blackfin.h> +#ifdef PLL_CTL +#include <asm/mach-common/bits/pll.h> +# define pll_is_bypassed() (bfin_read_PLL_STAT() & DF) +#else +#include <asm/mach-common/bits/cgu.h> +# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP) +# define bfin_read_PLL_CTL() bfin_read_CGU_CTL() +# define bfin_read_PLL_DIV() bfin_read_CGU_DIV() +# define SSEL SYSSEL +# define SSEL_P SYSSEL_P +#endif + +__attribute__((always_inline)) +static inline uint32_t early_division(uint32_t dividend, uint32_t divisor) +{ + uint32_t quotient; + uint32_t i, j; + + for (quotient = 1, i = 1; dividend > divisor; ++i) { + j = divisor << i; + if (j > dividend || (j & 0x80000000)) { + --i; + quotient += (1 << i); + dividend -= (divisor << i); + i = 0; + } + } + + return quotient; +} + +__attribute__((always_inline)) +static inline uint32_t early_get_uart_clk(void) +{ + uint32_t msel, pll_ctl, vco; + uint32_t div, ssel, sclk, uclk; + + pll_ctl = bfin_read_PLL_CTL(); + msel = (pll_ctl & MSEL) >> MSEL_P; + if (msel == 0) + msel = (MSEL >> MSEL_P) + 1; + + vco = (CONFIG_CLKIN_HZ >> (pll_ctl & DF)) * msel; + sclk = vco; + if (!pll_is_bypassed()) { + div = bfin_read_PLL_DIV(); + ssel = (div & SSEL) >> SSEL_P; + sclk = early_division(vco, ssel); + } + uclk = sclk; +#ifdef CGU_DIV + ssel = (div & S0SEL) >> S0SEL_P; + uclk = early_division(sclk, ssel); +#endif + return uclk; +} + +#ifdef CGU_DIV +# define get_uart_clk get_sclk0 +#else +# define get_uart_clk get_sclk +#endif + +#endif diff --git a/arch/blackfin/lib/clocks.c b/arch/blackfin/lib/clocks.c index d852f5ebed..97795e11ac 100644 --- a/arch/blackfin/lib/clocks.c +++ b/arch/blackfin/lib/clocks.c @@ -7,17 +7,7 @@ */ #include <common.h> -#include <asm/blackfin.h> - -#ifdef PLL_CTL -# include <asm/mach-common/bits/pll.h> -# define pll_is_bypassed() (bfin_read_PLL_STAT() & DF) -#else -# include <asm/mach-common/bits/cgu.h> -# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP) -# define bfin_read_PLL_CTL() bfin_read_CGU_CTL() -# define bfin_read_PLL_DIV() bfin_read_CGU_DIV() -#endif +#include <asm/clock.h> /* Get the voltage input multiplier */ u_long get_vco(void) |
