diff options
Diffstat (limited to 'arch/arm/mach-at91/arm920t')
| -rw-r--r-- | arch/arm/mach-at91/arm920t/Makefile | 13 | ||||
| -rw-r--r-- | arch/arm/mach-at91/arm920t/at91rm9200_devices.c | 67 | ||||
| -rw-r--r-- | arch/arm/mach-at91/arm920t/clock.c | 157 | ||||
| -rw-r--r-- | arch/arm/mach-at91/arm920t/cpu.c | 26 | ||||
| -rw-r--r-- | arch/arm/mach-at91/arm920t/lowlevel_init.S | 152 | ||||
| -rw-r--r-- | arch/arm/mach-at91/arm920t/reset.c | 41 | ||||
| -rw-r--r-- | arch/arm/mach-at91/arm920t/timer.c | 127 |
7 files changed, 583 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/arm920t/Makefile b/arch/arm/mach-at91/arm920t/Makefile new file mode 100644 index 0000000000..561b4b4cbb --- /dev/null +++ b/arch/arm/mach-at91/arm920t/Makefile @@ -0,0 +1,13 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += lowlevel_init.o +obj-y += reset.o +obj-y += timer.o +obj-y += clock.o +obj-y += cpu.o +obj-y += at91rm9200_devices.o diff --git a/arch/arm/mach-at91/arm920t/at91rm9200_devices.c b/arch/arm/mach-at91/arm920t/at91rm9200_devices.c new file mode 100644 index 0000000000..fc54327c0d --- /dev/null +++ b/arch/arm/mach-at91/arm920t/at91rm9200_devices.c @@ -0,0 +1,67 @@ +/* + * [partely copied from arch/arm/cpu/arm926ejs/at91/arm9260_devices.c] + * + * (C) Copyright 2011 + * Andreas Bießmann <andreas.devel@googlemail.com> + * + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 20, PUP); /* RXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 21, 1); /* TXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* RXD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 23, 1); /* TXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 30, PUP); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 31, 1); /* DTXD */ + /* writing SYS to PCER has no effect on AT91RM9200 */ +} diff --git a/arch/arm/mach-at91/arm920t/clock.c b/arch/arm/mach-at91/arm920t/clock.c new file mode 100644 index 0000000000..2813bf7821 --- /dev/null +++ b/arch/arm/mach-at91/arm920t/clock.c @@ -0,0 +1,157 @@ +/* + * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] + * + * Copyright (C) 2011 Andreas Bießmann + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static unsigned long at91_css_to_rate(unsigned long css) +{ + switch (css) { + case AT91_PMC_MCKR_CSS_SLOW: + return CONFIG_SYS_AT91_SLOW_CLOCK; + case AT91_PMC_MCKR_CSS_MAIN: + return gd->arch.main_clk_rate_hz; + case AT91_PMC_MCKR_CSS_PLLA: + return gd->arch.plla_rate_hz; + case AT91_PMC_MCKR_CSS_PLLB: + return gd->arch.pllb_rate_hz; + } + + return 0; +} + +#ifdef CONFIG_USB_ATMEL +static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq) +{ + unsigned i, div = 0, mul = 0, diff = 1 << 30; + unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; + + /* PLL output max 240 MHz (or 180 MHz per errata) */ + if (out_freq > 240000000) + goto fail; + + for (i = 1; i < 256; i++) { + int diff1; + unsigned input, mul1; + + /* + * PLL input between 1MHz and 32MHz per spec, but lower + * frequences seem necessary in some cases so allow 100K. + * Warning: some newer products need 2MHz min. + */ + input = main_freq / i; + if (input < 100000) + continue; + if (input > 32000000) + continue; + + mul1 = out_freq / input; + if (mul1 > 2048) + continue; + if (mul1 < 2) + goto fail; + + diff1 = out_freq - input * mul1; + if (diff1 < 0) + diff1 = -diff1; + if (diff > diff1) { + diff = diff1; + div = i; + mul = mul1; + if (diff == 0) + break; + } + } + if (i == 256 && diff > (out_freq >> 5)) + goto fail; + return ret | ((mul - 1) << 16) | div; +fail: + return 0; +} +#endif + +static u32 at91_pll_rate(u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 16) & 0x7ff; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else + freq = 0; + + return freq; +} + +int at91_clock_init(unsigned long main_clock) +{ + unsigned freq, mckr; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK + unsigned tmp; + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = readl(&pmc->mcfr); + } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); + tmp &= AT91_PMC_MCFR_MAINF_MASK; + main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + } +#endif + gd->arch.main_clk_rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); + +#ifdef CONFIG_USB_ATMEL + /* + * USB clock init: choose 48 MHz PLLB value, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | + AT91_PMC_PLLBR_USBDIV_2; + gd->arch.pllb_rate_hz = at91_pll_rate(main_clock, + gd->arch.at91_pllb_usb_init); +#endif + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = readl(&pmc->mckr); + gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); + freq = gd->arch.mck_rate_hz; + + freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */ + /* mdiv */ + gd->arch.mck_rate_hz = freq / + (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); + gd->arch.cpu_clk_rate_hz = freq; + + return 0; +} diff --git a/arch/arm/mach-at91/arm920t/cpu.c b/arch/arm/mach-at91/arm920t/cpu.c new file mode 100644 index 0000000000..b0f411b1c3 --- /dev/null +++ b/arch/arm/mach-at91/arm920t/cpu.c @@ -0,0 +1,26 @@ +/* + * [origin: arch/arm/cpu/arm926ejs/at91/cpu.c] + * + * (C) Copyright 2011 + * Andreas Bießmann, andreas.devel@googlemail.com + * (C) Copyright 2010 + * Reinhard Meyer, reinhard.meyer@emk-elektronik.de + * (C) Copyright 2009 + * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/clk.h> + +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#endif + +int arch_cpu_init(void) +{ + return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); +} diff --git a/arch/arm/mach-at91/arm920t/lowlevel_init.S b/arch/arm/mach-at91/arm920t/lowlevel_init.S new file mode 100644 index 0000000000..d2934a3525 --- /dev/null +++ b/arch/arm/mach-at91/arm920t/lowlevel_init.S @@ -0,0 +1,152 @@ +/* + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the at91rm9200dk board by + * (C) Copyright 2004 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + +#include <asm/arch/hardware.h> +#include <asm/arch/at91_mc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pio.h> + +#define ARM920T_CONTROL 0xC0000000 /* @ set bit 31 (iA) and 30 (nF) */ + +_MTEXT_BASE: +#undef START_FROM_MEM +#ifdef START_FROM_MEM + .word CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1 +#else + .word CONFIG_SYS_TEXT_BASE +#endif + +.globl lowlevel_init +lowlevel_init: + ldr r1, =AT91_ASM_PMC_MOR + /* Main oscillator Enable register */ +#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR + ldr r0, =0x0000FF01 /* Enable main oscillator */ +#else + ldr r0, =0x0000FF00 /* Disable main oscillator */ +#endif + str r0, [r1] /*AT91C_CKGR_MOR] */ + /* Add loop to compensate Main Oscillator startup time */ + ldr r0, =0x00000010 +LoopOsc: + subs r0, r0, #1 + bhi LoopOsc + + /* memory control configuration */ + /* this isn't very elegant, but what the heck */ + ldr r0, =SMRDATA + ldr r1, _MTEXT_BASE + sub r0, r0, r1 + ldr r2, =SMRDATAE + sub r2, r2, r1 +pllloop: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne pllloop + /* delay - this is all done by guess */ + ldr r0, =0x00010000 + /* (vs reading PMC_SR for LOCKA, LOCKB ... or MOSCS earlier) */ +lock: + subs r0, r0, #1 + bhi lock + ldr r0, =SMRDATA1 + ldr r1, _MTEXT_BASE + sub r0, r0, r1 + ldr r2, =SMRDATA1E + sub r2, r2, r1 +sdinit: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne sdinit + + /* switch from FastBus to Asynchronous clock mode */ + mrc p15, 0, r0, c1, c0, 0 + orr r0, r0, #ARM920T_CONTROL + mcr p15, 0, r0, c1, c0, 0 + + /* everything is fine now */ + mov pc, lr + + .ltorg + +SMRDATA: + .word AT91_ASM_MC_EBI_CFG + .word CONFIG_SYS_EBI_CFGR_VAL + .word AT91_ASM_MC_SMC_CSR0 + .word CONFIG_SYS_SMC_CSR0_VAL + .word AT91_ASM_PMC_PLLAR + .word CONFIG_SYS_PLLAR_VAL + .word AT91_ASM_PMC_PLLBR + .word CONFIG_SYS_PLLBR_VAL + .word AT91_ASM_PMC_MCKR + .word CONFIG_SYS_MCKR_VAL +SMRDATAE: + /* here there's a delay */ +SMRDATA1: + .word AT91_ASM_PIOC_ASR + .word CONFIG_SYS_PIOC_ASR_VAL + .word AT91_ASM_PIOC_BSR + .word CONFIG_SYS_PIOC_BSR_VAL + .word AT91_ASM_PIOC_PDR + .word CONFIG_SYS_PIOC_PDR_VAL + .word AT91_ASM_MC_EBI_CSA + .word CONFIG_SYS_EBI_CSA_VAL + .word AT91_ASM_MC_SDRAMC_CR + .word CONFIG_SYS_SDRC_CR_VAL + .word AT91_ASM_MC_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91_ASM_MC_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL1 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91_ASM_MC_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL2 + .word CONFIG_SYS_SDRAM1 + .word CONFIG_SYS_SDRAM_VAL + .word AT91_ASM_MC_SDRAMC_TR + .word CONFIG_SYS_SDRC_TR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91_ASM_MC_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL3 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL +SMRDATA1E: + /* SMRDATA1 is 176 bytes long */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/arch/arm/mach-at91/arm920t/reset.c b/arch/arm/mach-at91/arm920t/reset.c new file mode 100644 index 0000000000..d47777a367 --- /dev/null +++ b/arch/arm/mach-at91/arm920t/reset.c @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2002 + * Lineo, Inc. <www.lineo.com> + * Bernhard Kuhn <bkuhn@lineo.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_st.h> + +void __attribute__((weak)) board_reset(void) +{ + /* true empty function for defining weak symbol */ +} + +void reset_cpu(ulong ignored) +{ + at91_st_t *st = (at91_st_t *) ATMEL_BASE_ST; + + board_reset(); + + /* Reset the cpu by setting up the watchdog timer */ + writel(AT91_ST_WDMR_RSTEN | AT91_ST_WDMR_EXTEN | AT91_ST_WDMR_WDV(2), + &st->wdmr); + writel(AT91_ST_CR_WDRST, &st->cr); + /* and let it timeout */ + while (1) + ; + /* Never reached */ +} diff --git a/arch/arm/mach-at91/arm920t/timer.c b/arch/arm/mach-at91/arm920t/timer.c new file mode 100644 index 0000000000..6aa2994723 --- /dev/null +++ b/arch/arm/mach-at91/arm920t/timer.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2002 + * Lineo, Inc. <www.lineo.com> + * Bernhard Kuhn <bkuhn@lineo.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_tc.h> +#include <asm/arch/at91_pmc.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* the number of clocks per CONFIG_SYS_HZ */ +#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ) + +int timer_init(void) +{ + at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + /* enables TC1.0 clock */ + writel(1 << ATMEL_ID_TC0, &pmc->pcer); /* enable clock */ + + writel(0, &tc->bcr); + writel(AT91_TC_BMR_TC0XC0S_NONE | AT91_TC_BMR_TC1XC1S_NONE | + AT91_TC_BMR_TC2XC2S_NONE , &tc->bmr); + + writel(AT91_TC_CCR_CLKDIS, &tc->tc[0].ccr); + /* set to MCLK/2 and restart the timer + when the value in TC_RC is reached */ + writel(AT91_TC_CMR_TCCLKS_CLOCK1 | AT91_TC_CMR_CPCTRG, &tc->tc[0].cmr); + + writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interrupts */ + writel(TIMER_LOAD_VAL, &tc->tc[0].rc); + + writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr); + gd->arch.lastinc = 0; + gd->arch.tbl = 0; + + return 0; +} + +/* + * timer without interrupts + */ +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void __udelay(unsigned long usec) +{ + udelay_masked(usec); +} + +ulong get_timer_raw(void) +{ + at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC; + u32 now; + + now = readl(&tc->tc[0].cv) & 0x0000ffff; + + if (now >= gd->arch.lastinc) { + /* normal mode */ + gd->arch.tbl += now - gd->arch.lastinc; + } else { + /* we have an overflow ... */ + gd->arch.tbl += now + TIMER_LOAD_VAL - gd->arch.lastinc; + } + gd->arch.lastinc = now; + + return gd->arch.tbl; +} + +ulong get_timer_masked(void) +{ + return get_timer_raw()/TIMER_LOAD_VAL; +} + +void udelay_masked(unsigned long usec) +{ + u32 tmo; + u32 endtime; + signed long diff; + + tmo = CONFIG_SYS_HZ_CLOCK / 1000; + tmo *= usec; + tmo /= 1000; + + endtime = get_timer_raw() + tmo; + + do { + u32 now = get_timer_raw(); + diff = endtime - now; + } while (diff >= 0); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} |
