diff options
Diffstat (limited to 'arch/arm/cpu/armv7/zynq/slcr.c')
| -rw-r--r-- | arch/arm/cpu/armv7/zynq/slcr.c | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c deleted file mode 100644 index 2521589c07..0000000000 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Copyright (c) 2013 Xilinx Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <malloc.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/clk.h> - -#define SLCR_LOCK_MAGIC 0x767B -#define SLCR_UNLOCK_MAGIC 0xDF0D - -#define SLCR_USB_L1_SEL 0x04 - -#define SLCR_IDCODE_MASK 0x1F000 -#define SLCR_IDCODE_SHIFT 12 - -/* - * zynq_slcr_mio_get_status - Get the status of MIO peripheral. - * - * @peri_name: Name of the peripheral for checking MIO status - * @get_pins: Pointer to array of get pin for this peripheral - * @num_pins: Number of pins for this peripheral - * @mask: Mask value - * @check_val: Required check value to get the status of periph - */ -struct zynq_slcr_mio_get_status { - const char *peri_name; - const int *get_pins; - int num_pins; - u32 mask; - u32 check_val; -}; - -static const int usb0_pins[] = { - 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39 -}; - -static const int usb1_pins[] = { - 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51 -}; - -static const struct zynq_slcr_mio_get_status mio_periphs[] = { - { - "usb0", - usb0_pins, - ARRAY_SIZE(usb0_pins), - SLCR_USB_L1_SEL, - SLCR_USB_L1_SEL, - }, - { - "usb1", - usb1_pins, - ARRAY_SIZE(usb1_pins), - SLCR_USB_L1_SEL, - SLCR_USB_L1_SEL, - }, -}; - -static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */ - -void zynq_slcr_lock(void) -{ - if (!slcr_lock) { - writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock); - slcr_lock = 1; - } -} - -void zynq_slcr_unlock(void) -{ - if (slcr_lock) { - writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock); - slcr_lock = 0; - } -} - -/* Reset the entire system */ -void zynq_slcr_cpu_reset(void) -{ - /* - * Unlock the SLCR then reset the system. - * Note that this seems to require raw i/o - * functions or there's a lockup? - */ - zynq_slcr_unlock(); - - /* - * Clear 0x0F000000 bits of reboot status register to workaround - * the FSBL not loading the bitstream after soft-reboot - * This is a temporary solution until we know more. - */ - clrbits_le32(&slcr_base->reboot_status, 0xF000000); - - writel(1, &slcr_base->pss_rst_ctrl); -} - -/* Setup clk for network */ -void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate) -{ - int ret; - - zynq_slcr_unlock(); - - if (gem_id > 1) { - printf("Non existing GEM id %d\n", gem_id); - goto out; - } - - ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate); - if (ret) - goto out; - - if (gem_id) { - /* Configure GEM_RCLK_CTRL */ - writel(1, &slcr_base->gem1_rclk_ctrl); - } else { - /* Configure GEM_RCLK_CTRL */ - writel(1, &slcr_base->gem0_rclk_ctrl); - } - udelay(100000); -out: - zynq_slcr_lock(); -} - -void zynq_slcr_devcfg_disable(void) -{ - zynq_slcr_unlock(); - - /* Disable AXI interface by asserting FPGA resets */ - writel(0xF, &slcr_base->fpga_rst_ctrl); - - /* Set Level Shifters DT618760 */ - writel(0xA, &slcr_base->lvl_shftr_en); - - zynq_slcr_lock(); -} - -void zynq_slcr_devcfg_enable(void) -{ - zynq_slcr_unlock(); - - /* Set Level Shifters DT618760 */ - writel(0xF, &slcr_base->lvl_shftr_en); - - /* Enable AXI interface by de-asserting FPGA resets */ - writel(0x0, &slcr_base->fpga_rst_ctrl); - - zynq_slcr_lock(); -} - -u32 zynq_slcr_get_boot_mode(void) -{ - /* Get the bootmode register value */ - return readl(&slcr_base->boot_mode); -} - -u32 zynq_slcr_get_idcode(void) -{ - return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >> - SLCR_IDCODE_SHIFT; -} - -/* - * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral. - * - * @periph: Name of the peripheral - * - * Returns count to indicate the number of pins configured for the - * given @periph. - */ -int zynq_slcr_get_mio_pin_status(const char *periph) -{ - const struct zynq_slcr_mio_get_status *mio_ptr; - int val, i, j; - int mio = 0; - - for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) { - if (strcmp(periph, mio_periphs[i].peri_name) == 0) { - mio_ptr = &mio_periphs[i]; - for (j = 0; j < mio_ptr->num_pins; j++) { - val = readl(&slcr_base->mio_pin - [mio_ptr->get_pins[j]]); - if ((val & mio_ptr->mask) == mio_ptr->check_val) - mio++; - } - break; - } - } - - return mio; -} |
