5 files changed, 20 insertions, 47 deletions
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
index e11f4f6d8b..74129bc86a 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
@@ -5,7 +5,6 @@
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
 obj-y += platdevice.o
 obj-y += boot-mode.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \
-				sg_init.o pll_init.o clkrst_init.o pinctrl.o
-obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \
-	umc_init.o
+obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o
+obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
+obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c
deleted file mode 100644
index 7198829988..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/led.h>
-#include <asm/arch/board.h>
-
-void sbc_init(void);
-void sg_init(void);
-void pll_init(void);
-void pin_init(void);
-void clkrst_init(void);
-
-int board_postclk_init(void)
-{
-	sbc_init();
-
-	sg_init();
-
-	pll_init();
-
-	uniphier_board_init();
-
-	led_write(B, 1, , );
-
-	clkrst_init();
-
-	led_write(B, 2, , );
-
-	pin_init();
-
-	led_write(B, 3, , );
-
-	return 0;
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
index 503c247d6b..4e3d47615b 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
@@ -41,5 +41,12 @@ void pin_init(void)
 	sg_set_pinsel(54, 0);	/* NRYBY0 -> NRYBY0 */
 #endif
 
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+	sg_set_pinsel(184, 0);	/* USB2VBUS -> USB2VBUS */
+	sg_set_pinsel(185, 0);	/* USB2OD   -> USB2OD */
+	sg_set_pinsel(187, 0);	/* USB3VBUS -> USB3VBUS */
+	sg_set_pinsel(188, 0);	/* USB3OD   -> USB3OD */
+#endif
+
 	writel(1, SG_LOADPINCTRL);
 }
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
index 6da921e920..1843d0469f 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
@@ -13,3 +13,13 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
 SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
 SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
 SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
+
+/* USB : TODO for Masahiro Yamada: move base address to Device Tree */
+struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = {
+	{
+		.base = 0x5a800100,
+	},
+	{
+		.base = 0x5a810100,
+	},
+};
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c
index dd462875bb..328b2f4d9a 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c
@@ -122,10 +122,6 @@ int umc_init(void)
 					CONFIG_SDRAM1_SIZE / 0x08000000);
 }
 
-#if CONFIG_DDR_FREQ != 1600
-#error Unsupported DDR frequency.
-#endif
-
 #if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \
      (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \
     ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \