diff options
Diffstat (limited to 'arch/arm/cpu/arm_cortexa8')
32 files changed, 5134 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm_cortexa8/Makefile b/arch/arm/cpu/arm_cortexa8/Makefile new file mode 100644 index 0000000000..ae20299db7 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START := start.o +COBJS := cpu.o + +SRCS := $(START:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
\ No newline at end of file diff --git a/arch/arm/cpu/arm_cortexa8/config.mk b/arch/arm/cpu/arm_cortexa8/config.mk new file mode 100644 index 0000000000..49ac9c74ae --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v7a. +PLATFORM_CPPFLAGS += -march=armv5 +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,\ + $(call cc-option,-malignment-traps,)) diff --git a/arch/arm/cpu/arm_cortexa8/cpu.c b/arch/arm/cpu/arm_cortexa8/cpu.c new file mode 100644 index 0000000000..a01e0d605f --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/cpu.c @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2008 Texas Insturments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include <common.h> +#include <command.h> +#include <asm/system.h> +#include <asm/cache.h> +#ifndef CONFIG_L2_OFF +#include <asm/arch/sys_proto.h> +#endif + +static void cache_flush(void); + +int cleanup_before_linux(void) +{ + unsigned int i; + + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ + disable_interrupts(); + + /* turn off I/D-cache */ + icache_disable(); + dcache_disable(); + + /* invalidate I-cache */ + cache_flush(); + +#ifndef CONFIG_L2_OFF + /* turn off L2 cache */ + l2_cache_disable(); + /* invalidate L2 cache also */ + invalidate_dcache(get_device_type()); +#endif + i = 0; + /* mem barrier to sync up things */ + asm("mcr p15, 0, %0, c7, c10, 4": :"r"(i)); + +#ifndef CONFIG_L2_OFF + l2_cache_enable(); +#endif + + return 0; +} + +static void cache_flush(void) +{ + asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0)); +} diff --git a/arch/arm/cpu/arm_cortexa8/mx51/Makefile b/arch/arm/cpu/arm_cortexa8/mx51/Makefile new file mode 100644 index 0000000000..7cfaa2c130 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/mx51/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS = soc.o clock.o iomux.o timer.o speed.o +SOBJS = lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm_cortexa8/mx51/clock.c b/arch/arm/cpu/arm_cortexa8/mx51/clock.c new file mode 100644 index 0000000000..38480ac5a1 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/mx51/clock.c @@ -0,0 +1,294 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> + +enum pll_clocks { + PLL1_CLOCK = 0, + PLL2_CLOCK, + PLL3_CLOCK, + PLL_CLOCKS, +}; + +struct mxc_pll_reg *mxc_plls[PLL_CLOCKS] = { + [PLL1_CLOCK] = (struct mxc_pll_reg *)PLL1_BASE_ADDR, + [PLL2_CLOCK] = (struct mxc_pll_reg *)PLL2_BASE_ADDR, + [PLL3_CLOCK] = (struct mxc_pll_reg *)PLL3_BASE_ADDR, +}; + +struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; + +/* + * Calculate the frequency of this pll. + */ +static u32 decode_pll(struct mxc_pll_reg *pll, u32 infreq) +{ + u32 mfi, mfn, mfd, pd; + + mfn = __raw_readl(&pll->mfn); + mfd = __raw_readl(&pll->mfd) + 1; + mfi = __raw_readl(&pll->op); + pd = (mfi & 0xF) + 1; + mfi = (mfi >> 4) & 0xF; + mfi = (mfi >= 5) ? mfi : 5; + + return ((4 * (infreq / 1000) * (mfi * mfd + mfn)) / (mfd * pd)) * 1000; +} + +/* + * Get mcu main rate + */ +u32 get_mcu_main_clk(void) +{ + u32 reg, freq; + + reg = (__raw_readl(&mxc_ccm->cacrr) & MXC_CCM_CACRR_ARM_PODF_MASK) >> + MXC_CCM_CACRR_ARM_PODF_OFFSET; + freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); + return freq / (reg + 1); +} + +/* + * Get the rate of peripheral's root clock. + */ +static u32 get_periph_clk(void) +{ + u32 reg; + + reg = __raw_readl(&mxc_ccm->cbcdr); + if (!(reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL)) + return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ); + reg = __raw_readl(&mxc_ccm->cbcmr); + switch ((reg & MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >> + MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) { + case 0: + return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); + case 1: + return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ); + default: + return 0; + } + /* NOTREACHED */ +} + +/* + * Get the rate of ipg clock. + */ +static u32 get_ipg_clk(void) +{ + u32 ahb_podf, ipg_podf; + + ahb_podf = __raw_readl(&mxc_ccm->cbcdr); + ipg_podf = (ahb_podf & MXC_CCM_CBCDR_IPG_PODF_MASK) >> + MXC_CCM_CBCDR_IPG_PODF_OFFSET; + ahb_podf = (ahb_podf & MXC_CCM_CBCDR_AHB_PODF_MASK) >> + MXC_CCM_CBCDR_AHB_PODF_OFFSET; + return get_periph_clk() / ((ahb_podf + 1) * (ipg_podf + 1)); +} + +/* + * Get the rate of ipg_per clock. + */ +static u32 get_ipg_per_clk(void) +{ + u32 pred1, pred2, podf; + + if (__raw_readl(&mxc_ccm->cbcmr) & MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL) + return get_ipg_clk(); + /* Fixme: not handle what about lpm*/ + podf = __raw_readl(&mxc_ccm->cbcdr); + pred1 = (podf & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET; + pred2 = (podf & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET; + podf = (podf & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >> + MXC_CCM_CBCDR_PERCLK_PODF_OFFSET; + + return get_periph_clk() / ((pred1 + 1) * (pred2 + 1) * (podf + 1)); +} + +/* + * Get the rate of uart clk. + */ +static u32 get_uart_clk(void) +{ + unsigned int freq, reg, pred, podf; + + reg = __raw_readl(&mxc_ccm->cscmr1); + switch ((reg & MXC_CCM_CSCMR1_UART_CLK_SEL_MASK) >> + MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET) { + case 0x0: + freq = decode_pll(mxc_plls[PLL1_CLOCK], + CONFIG_MX51_HCLK_FREQ); + break; + case 0x1: + freq = decode_pll(mxc_plls[PLL2_CLOCK], + CONFIG_MX51_HCLK_FREQ); + break; + case 0x2: + freq = decode_pll(mxc_plls[PLL3_CLOCK], + CONFIG_MX51_HCLK_FREQ); + break; + default: + return 66500000; + } + + reg = __raw_readl(&mxc_ccm->cscdr1); + + pred = (reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET; + + podf = (reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET; + freq /= (pred + 1) * (podf + 1); + + return freq; +} + +/* + * This function returns the low power audio clock. + */ +u32 get_lp_apm(void) +{ + u32 ret_val = 0; + u32 ccsr = __raw_readl(&mxc_ccm->ccsr); + + if (((ccsr >> 9) & 1) == 0) + ret_val = CONFIG_MX51_HCLK_FREQ; + else + ret_val = ((32768 * 1024)); + + return ret_val; +} + +/* + * get cspi clock rate. + */ +u32 imx_get_cspiclk(void) +{ + u32 ret_val = 0, pdf, pre_pdf, clk_sel; + u32 cscmr1 = __raw_readl(&mxc_ccm->cscmr1); + u32 cscdr2 = __raw_readl(&mxc_ccm->cscdr2); + + pre_pdf = (cscdr2 & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) \ + >> MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET; + pdf = (cscdr2 & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) \ + >> MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET; + clk_sel = (cscmr1 & MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK) \ + >> MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET; + + switch (clk_sel) { + case 0: + ret_val = decode_pll(mxc_plls[PLL1_CLOCK], + CONFIG_MX51_HCLK_FREQ) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case 1: + ret_val = decode_pll(mxc_plls[PLL2_CLOCK], + CONFIG_MX51_HCLK_FREQ) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case 2: + ret_val = decode_pll(mxc_plls[PLL3_CLOCK], + CONFIG_MX51_HCLK_FREQ) / + ((pre_pdf + 1) * (pdf + 1)); + break; + default: + ret_val = get_lp_apm() / ((pre_pdf + 1) * (pdf + 1)); + break; + } + + return ret_val; +} + +/* + * The API of get mxc clockes. + */ +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return get_mcu_main_clk(); + case MXC_AHB_CLK: + break; + case MXC_IPG_CLK: + return get_ipg_clk(); + case MXC_IPG_PERCLK: + return get_ipg_per_clk(); + case MXC_UART_CLK: + return get_uart_clk(); + case MXC_CSPI_CLK: + return imx_get_cspiclk(); + case MXC_FEC_CLK: + return decode_pll(mxc_plls[PLL1_CLOCK], + CONFIG_MX51_HCLK_FREQ); + default: + break; + } + return -1; +} + +u32 imx_get_uartclk(void) +{ + return get_uart_clk(); +} + + +u32 imx_get_fecclk(void) +{ + return mxc_get_clock(MXC_IPG_CLK); +} + +/* + * Dump some core clockes. + */ +int do_mx51_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + u32 freq; + + freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll1: %dMHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll2: %dMHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ); + printf("mx51 pll3: %dMHz\n", freq / 1000000); + printf("ipg clock : %dHz\n", mxc_get_clock(MXC_IPG_CLK)); + printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK)); + + return 0; +} + +/***************************************************/ + +U_BOOT_CMD( + clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx51_showclocks, + "display mx51 clocks\n", + "" +); diff --git a/arch/arm/cpu/arm_cortexa8/mx51/iomux.c b/arch/arm/cpu/arm_cortexa8/mx51/iomux.c new file mode 100644 index 0000000000..62b2954be9 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/mx51/iomux.c @@ -0,0 +1,166 @@ +/* + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx51_pins.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sys_proto.h> + +/* IOMUX register (base) addresses */ +enum iomux_reg_addr { + IOMUXGPR0 = IOMUXC_BASE_ADDR, + IOMUXGPR1 = IOMUXC_BASE_ADDR + 0x004, + IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR, + IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + MUX_I_END, + IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + PAD_I_START, + IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR, +}; + +#define MUX_PIN_NUM_MAX (((MUX_I_END - MUX_I_START) >> 2) + 1) + +/* Get the iomux register address of this pin */ +static inline u32 get_mux_reg(iomux_pin_name_t pin) +{ + u32 mux_reg = PIN_TO_IOMUX_MUX(pin); + + if (is_soc_rev(CHIP_REV_2_0) < 0) { + /* + * Fixup register address: + * i.MX51 TO1 has offset with the register + * which is define as TO2. + */ + if ((pin == MX51_PIN_NANDF_RB5) || + (pin == MX51_PIN_NANDF_RB6) || + (pin == MX51_PIN_NANDF_RB7)) + ; /* Do nothing */ + else if (mux_reg >= 0x2FC) + mux_reg += 8; + else if (mux_reg >= 0x130) + mux_reg += 0xC; + } + mux_reg += IOMUXSW_MUX_CTL; + return mux_reg; +} + +/* Get the pad register address of this pin */ +static inline u32 get_pad_reg(iomux_pin_name_t pin) +{ + u32 pad_reg = PIN_TO_IOMUX_PAD(pin); + + if (is_soc_rev(CHIP_REV_2_0) < 0) { + /* + * Fixup register address: + * i.MX51 TO1 has offset with the register + * which is define as TO2. + */ + if ((pin == MX51_PIN_NANDF_RB5) || + (pin == MX51_PIN_NANDF_RB6) || + (pin == MX51_PIN_NANDF_RB7)) + ; /* Do nothing */ + else if (pad_reg == 0x4D0 - PAD_I_START) + pad_reg += 0x4C; + else if (pad_reg == 0x860 - PAD_I_START) + pad_reg += 0x9C; + else if (pad_reg >= 0x804 - PAD_I_START) + pad_reg += 0xB0; + else if (pad_reg >= 0x7FC - PAD_I_START) + pad_reg += 0xB4; + else if (pad_reg >= 0x4E4 - PAD_I_START) + pad_reg += 0xCC; + else + pad_reg += 8; + } + pad_reg += IOMUXSW_PAD_CTL; + return pad_reg; +} + +/* Get the last iomux register address */ +static inline u32 get_mux_end(void) +{ + if (is_soc_rev(CHIP_REV_2_0) < 0) + return IOMUXC_BASE_ADDR + (0x3F8 - 4); + else + return IOMUXC_BASE_ADDR + (0x3F0 - 4); +} + +/* + * This function is used to configure a pin through the IOMUX module. + * @param pin a pin number as defined in iomux_pin_name_t + * @param cfg an output function as defined in iomux_pin_cfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +static void iomux_config_mux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ + u32 mux_reg = get_mux_reg(pin); + + if ((mux_reg > get_mux_end()) || (mux_reg < IOMUXSW_MUX_CTL)) + return ; + if (cfg == IOMUX_CONFIG_GPIO) + writel(PIN_TO_ALT_GPIO(pin), mux_reg); + else + writel(cfg, mux_reg); +} + +/* + * Request ownership for an IO pin. This function has to be the first one + * being called before that pin is used. The caller has to check the + * return value to make sure it returns 0. + * + * @param pin a name defined by iomux_pin_name_t + * @param cfg an input function as defined in iomux_pin_cfg_t + * + */ +void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ + iomux_config_mux(pin, cfg); +} + +/* + * Release ownership for an IO pin + * + * @param pin a name defined by iomux_pin_name_t + * @param cfg an input function as defined in iomux_pin_cfg_t + */ +void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ +} + +/* + * This function configures the pad value for a IOMUX pin. + * + * @param pin a pin number as defined in iomux_pin_name_t + * @param config the ORed value of elements defined in iomux_pad_config_t + */ +void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config) +{ + u32 pad_reg = get_pad_reg(pin); + writel(config, pad_reg); +} + +unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin) +{ + u32 pad_reg = get_pad_reg(pin); + return readl(pad_reg); +} diff --git a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S b/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S new file mode 100644 index 0000000000..31af9e2b58 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/asm-offsets.h> + +/* + * L2CC Cache setup/invalidation/disable + */ +.macro init_l2cc + /* explicitly disable L2 cache */ + mrc 15, 0, r0, c1, c0, 1 + bic r0, r0, #0x2 + mcr 15, 0, r0, c1, c0, 1 + + /* reconfigure L2 cache aux control reg */ + mov r0, #0xC0 /* tag RAM */ + add r0, r0, #0x4 /* data RAM */ + orr r0, r0, #(1 << 24) /* disable write allocate delay */ + orr r0, r0, #(1 << 23) /* disable write allocate combine */ + orr r0, r0, #(1 << 22) /* disable write allocate */ + + cmp r3, #0x10 /* r3 contains the silicon rev */ + + /* disable write combine for TO 2 and lower revs */ + orrls r0, r0, #(1 << 25) + + mcr 15, 1, r0, c9, c0, 2 +.endm /* init_l2cc */ + +/* AIPS setup - Only setup MPROTx registers. + * The PACR default values are good.*/ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =0x77777777 + str r1, [r0, #0x0] + str r1, [r0, #0x4] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x0] + str r1, [r0, #0x4] + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ +.endm /* init_aips */ + +/* M4IF setup */ +.macro init_m4if + /* VPU and IPU given higher priority (0x4) + * IPU accesses with ID=0x1 given highest priority (=0xA) + */ + ldr r0, =M4IF_BASE_ADDR + + ldr r1, =0x00000203 + str r1, [r0, #0x40] + + ldr r1, =0x0 + str r1, [r0, #0x44] + + ldr r1, =0x00120125 + str r1, [r0, #0x9C] + + ldr r1, =0x001901A3 + str r1, [r0, #0x48] + +.endm /* init_m4if */ + +.macro setup_pll pll, freq + ldr r2, =\pll + ldr r1, =0x00001232 + str r1, [r2, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ + mov r1, #0x2 + str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ + + str r3, [r2, #PLL_DP_OP] + str r3, [r2, #PLL_DP_HFS_OP] + + str r4, [r2, #PLL_DP_MFD] + str r4, [r2, #PLL_DP_HFS_MFD] + + str r5, [r2, #PLL_DP_MFN] + str r5, [r2, #PLL_DP_HFS_MFN] + + ldr r1, =0x00001232 + str r1, [r2, #PLL_DP_CTL] +1: ldr r1, [r2, #PLL_DP_CTL] + ands r1, r1, #0x1 + beq 1b +.endm + +.macro init_clock + ldr r0, =CCM_BASE_ADDR + + /* Gate of clocks to the peripherals first */ + ldr r1, =0x3FFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + ldr r1, =0x0 + str r1, [r0, #CLKCTL_CCGR1] + str r1, [r0, #CLKCTL_CCGR2] + str r1, [r0, #CLKCTL_CCGR3] + + ldr r1, =0x00030000 + str r1, [r0, #CLKCTL_CCGR4] + ldr r1, =0x00FFF030 + str r1, [r0, #CLKCTL_CCGR5] + ldr r1, =0x00000300 + str r1, [r0, #CLKCTL_CCGR6] + + /* Disable IPU and HSC dividers */ + mov r1, #0x60000 + str r1, [r0, #CLKCTL_CCDR] + + /* Make sure to switch the DDR away from PLL 1 */ + ldr r1, =0x19239145 + str r1, [r0, #CLKCTL_CBCDR] + /* make sure divider effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + /* Switch ARM to step clock */ + mov r1, #0x4 + str r1, [r0, #CLKCTL_CCSR] + mov r3, #DP_OP_800 + mov r4, #DP_MFD_800 + mov r5, #DP_MFN_800 + setup_pll PLL1_BASE_ADDR + + mov r3, #DP_OP_665 + mov r4, #DP_MFD_665 + mov r5, #DP_MFN_665 + setup_pll PLL3_BASE_ADDR + + /* Switch peripheral to PLL 3 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x000010C0 + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, =0x13239145 + str r1, [r0, #CLKCTL_CBCDR] + mov r3, #DP_OP_665 + mov r4, #DP_MFD_665 + mov r5, #DP_MFN_665 + setup_pll PLL2_BASE_ADDR + + /* Switch peripheral to PLL2 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x19239145 + str r1, [r0, #CLKCTL_CBCDR] + ldr r1, =0x000020C0 + str r1, [r0, #CLKCTL_CBCMR] + + mov r3, #DP_OP_216 + mov r4, #DP_MFD_216 + mov r5, #DP_MFN_216 + setup_pll PLL3_BASE_ADDR + + + /* Set the platform clock dividers */ + ldr r0, =ARM_BASE_ADDR + ldr r1, =0x00000725 + str r1, [r0, #0x14] + + ldr r0, =CCM_BASE_ADDR + + /* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */ + ldr r1, =0x0 + ldr r3, [r1, #ROM_SI_REV] + cmp r3, #0x10 + movls r1, #0x1 + movhi r1, #0 + str r1, [r0, #CLKCTL_CACRR] + + /* Switch ARM back to PLL 1 */ + mov r1, #0 + str r1, [r0, #CLKCTL_CCSR] + + /* setup the rest */ + /* Use lp_apm (24MHz) source for perclk */ + ldr r1, =0x000020C2 + str r1, [r0, #CLKCTL_CBCMR] + /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ + ldr r1, =0x59E35100 + str r1, [r0, #CLKCTL_CBCDR] + + /* Restore the default values in the Gate registers */ + ldr r1, =0xFFFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r1, [r0, #CLKCTL_CCGR1] + str r1, [r0, #CLKCTL_CCGR2] + str r1, [r0, #CLKCTL_CCGR3] + str r1, [r0, #CLKCTL_CCGR4] + str r1, [r0, #CLKCTL_CCGR5] + str r1, [r0, #CLKCTL_CCGR6] + + /* Use PLL 2 for UART's, get 66.5MHz from it */ + ldr r1, =0xA5A2A020 + str r1, [r0, #CLKCTL_CSCMR1] + ldr r1, =0x00C30321 + str r1, [r0, #CLKCTL_CSCDR1] + + /* make sure divider effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + mov r1, #0x0 + str r1, [r0, #CLKCTL_CCDR] + + /* for cko - for ARM div by 8 */ + mov r1, #0x000A0000 + add r1, r1, #0x00000F0 + str r1, [r0, #CLKCTL_CCOSR] +.endm + +.macro setup_wdog + ldr r0, =WDOG1_BASE_ADDR + mov r1, #0x30 + strh r1, [r0] +.endm + +.section ".text.init", "x" + +.globl lowlevel_init +lowlevel_init: + ldr r0, =GPIO1_BASE_ADDR + ldr r1, [r0, #0x0] + orr r1, r1, #(1 << 23) + str r1, [r0, #0x0] + ldr r1, [r0, #0x4] + orr r1, r1, #(1 << 23) + str r1, [r0, #0x4] + +#ifdef ENABLE_IMPRECISE_ABORT + mrs r1, spsr /* save old spsr */ + mrs r0, cpsr /* read out the cpsr */ + bic r0, r0, #0x100 /* clear the A bit */ + msr spsr, r0 /* update spsr */ + add lr, pc, #0x8 /* update lr */ + movs pc, lr /* update cpsr */ + nop + nop + nop + nop + msr spsr, r1 /* restore old spsr */ +#endif + + init_l2cc + + init_aips + + init_m4if + + init_clock + + /* r12 saved upper lr*/ + mov pc,lr + +/* Board level setting value */ +DDR_PERCHARGE_CMD: .word 0x04008008 +DDR_REFRESH_CMD: .word 0x00008010 +DDR_LMR1_W: .word 0x00338018 +DDR_LMR_CMD: .word 0xB2220000 +DDR_TIMING_W: .word 0xB02567A9 +DDR_MISC_W: .word 0x000A0104 diff --git a/arch/arm/cpu/arm_cortexa8/mx51/soc.c b/arch/arm/cpu/arm_cortexa8/mx51/soc.c new file mode 100644 index 0000000000..2a139b21d5 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/mx51/soc.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/errno.h> +#include <asm/io.h> + +#ifdef CONFIG_FSL_ESDHC +#include <fsl_esdhc.h> +#endif + +u32 get_cpu_rev(void) +{ + int reg; + int system_rev; + + reg = __raw_readl(ROM_SI_REV); + switch (reg) { + case 0x02: + system_rev = 0x51000 | CHIP_REV_1_1; + break; + case 0x10: + if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) + system_rev = 0x51000 | CHIP_REV_2_5; + else + system_rev = 0x51000 | CHIP_REV_2_0; + break; + case 0x20: + system_rev = 0x51000 | CHIP_REV_3_0; + break; + return system_rev; + default: + system_rev = 0x51000 | CHIP_REV_1_0; + break; + } + return system_rev; +} + + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + u32 cpurev; + + cpurev = get_cpu_rev(); + printf("CPU: Freescale i.MX51 family %d.%dV at %d MHz\n", + (cpurev & 0xF0) >> 4, + (cpurev & 0x0F) >> 4, + mxc_get_clock(MXC_ARM_CLK) / 1000000); + return 0; +} +#endif + +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +#if defined(CONFIG_FEC_MXC) +extern int fecmxc_initialize(bd_t *bis); +#endif + +int cpu_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + +#if defined(CONFIG_FEC_MXC) + rc = fecmxc_initialize(bis); +#endif + + return rc; +} + +/* + * Initializes on-chip MMC controllers. + * to override, implement board_mmc_init() + */ +int cpu_mmc_init(bd_t *bis) +{ +#ifdef CONFIG_FSL_ESDHC + return fsl_esdhc_mmc_init(bis); +#else + return 0; +#endif +} + + +void reset_cpu(ulong addr) +{ + __raw_writew(4, WDOG1_BASE_ADDR); +} diff --git a/arch/arm/cpu/arm_cortexa8/mx51/speed.c b/arch/arm/cpu/arm_cortexa8/mx51/speed.c new file mode 100644 index 0000000000..a444def7eb --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/mx51/speed.c @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> + +int get_clocks(void) +{ + DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_FSL_ESDHC + gd->sdhc_clk = mxc_get_clock(MXC_IPG_PERCLK); +#endif + return 0; +} diff --git a/arch/arm/cpu/arm_cortexa8/mx51/timer.c b/arch/arm/cpu/arm_cortexa8/mx51/timer.c new file mode 100644 index 0000000000..8ecfec66da --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/mx51/timer.c @@ -0,0 +1,119 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> + +/* General purpose timers registers */ +struct mxc_gpt { + unsigned int control; + unsigned int prescaler; + unsigned int status; + unsigned int nouse[6]; + unsigned int counter; +}; + +static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR; + +/* General purpose timers bitfields */ +#define GPTCR_SWR (1<<15) /* Software reset */ +#define GPTCR_FRR (1<<9) /* Freerun / restart */ +#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ +#define GPTCR_TEN (1) /* Timer enable */ + +static ulong timestamp; +static ulong lastinc; + +int timer_init(void) +{ + int i; + + /* setup GP Timer 1 */ + __raw_writel(GPTCR_SWR, &cur_gpt->control); + + /* We have no udelay by now */ + for (i = 0; i < 100; i++) + __raw_writel(0, &cur_gpt->control); + + __raw_writel(0, &cur_gpt->prescaler); /* 32Khz */ + + /* Freerun Mode, PERCLK1 input */ + i = __raw_readl(&cur_gpt->control); + __raw_writel(i | GPTCR_CLKSOURCE_32 | GPTCR_TEN, &cur_gpt->control); + reset_timer_masked(); + return 0; +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +void reset_timer_masked(void) +{ + ulong val = __raw_readl(&cur_gpt->counter); + lastinc = val / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ); + timestamp = 0; +} + +ulong get_timer_masked(void) +{ + ulong val = __raw_readl(&cur_gpt->counter); + val /= (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ); + if (val >= lastinc) + timestamp += (val - lastinc); + else + timestamp += ((0xFFFFFFFF / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ)) + - lastinc) + val; + lastinc = val; + return val; +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + timestamp = t; +} + +/* delay x useconds AND perserve advance timstamp value */ +void __udelay(unsigned long usec) +{ + unsigned long now, start, tmo; + tmo = usec * (CONFIG_MX51_CLK32 / 1000) / 1000; + + if (!tmo) + tmo = 1; + + now = start = readl(&cur_gpt->counter); + + while ((now - start) < tmo) + now = readl(&cur_gpt->counter); + +} diff --git a/arch/arm/cpu/arm_cortexa8/mx51/u-boot.lds b/arch/arm/cpu/arm_cortexa8/mx51/u-boot.lds new file mode 100644 index 0000000000..2953b93632 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/mx51/u-boot.lds @@ -0,0 +1,61 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + arch/arm/cpu/arm_cortexa8/start.o + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/Makefile b/arch/arm/cpu/arm_cortexa8/omap3/Makefile new file mode 100644 index 0000000000..136b163ad7 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +SOBJS := lowlevel_init.o +SOBJS += cache.o +SOBJS += reset.o + +COBJS += board.o +COBJS += clock.o +COBJS += gpio.o +COBJS += mem.o +COBJS += syslib.o +COBJS += sys_info.o +COBJS += timer.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm_cortexa8/omap3/board.c b/arch/arm/cpu/arm_cortexa8/omap3/board.c new file mode 100644 index 0000000000..7b78fa448b --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/board.c @@ -0,0 +1,361 @@ +/* + * + * Common board functions for OMAP3 based boards. + * + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/cache.h> + +extern omap3_sysinfo sysinfo; + +extern u32 is_mem_sdr(void); + +/****************************************************************************** + * Routine: delay + * Description: spinning delay to use before udelay works + *****************************************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/****************************************************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************************************************/ +void secure_unlock_mem(void) +{ + struct pm *pm_rt_ape_base = (struct pm *)PM_RT_APE_BASE_ADDR_ARM; + struct pm *pm_gpmc_base = (struct pm *)PM_GPMC_BASE_ADDR_ARM; + struct pm *pm_ocm_ram_base = (struct pm *)PM_OCM_RAM_BASE_ADDR_ARM; + struct pm *pm_iva2_base = (struct pm *)PM_IVA2_BASE_ADDR_ARM; + struct sms *sms_base = (struct sms *)OMAP34XX_SMS_BASE; + + /* Protection Module Register Target APE (PM_RT) */ + writel(UNLOCK_1, &pm_rt_ape_base->req_info_permission_1); + writel(UNLOCK_1, &pm_rt_ape_base->read_permission_0); + writel(UNLOCK_1, &pm_rt_ape_base->wirte_permission_0); + writel(UNLOCK_2, &pm_rt_ape_base->addr_match_1); + + writel(UNLOCK_3, &pm_gpmc_base->req_info_permission_0); + writel(UNLOCK_3, &pm_gpmc_base->read_permission_0); + writel(UNLOCK_3, &pm_gpmc_base->wirte_permission_0); + + writel(UNLOCK_3, &pm_ocm_ram_base->req_info_permission_0); + writel(UNLOCK_3, &pm_ocm_ram_base->read_permission_0); + writel(UNLOCK_3, &pm_ocm_ram_base->wirte_permission_0); + writel(UNLOCK_2, &pm_ocm_ram_base->addr_match_2); + + /* IVA Changes */ + writel(UNLOCK_3, &pm_iva2_base->req_info_permission_0); + writel(UNLOCK_3, &pm_iva2_base->read_permission_0); + writel(UNLOCK_3, &pm_iva2_base->wirte_permission_0); + + /* SDRC region 0 public */ + writel(UNLOCK_1, &sms_base->rg_att0); +} + +/****************************************************************************** + * Routine: secureworld_exit() + * Description: If chip is EMU and boot type is external + * configure secure registers and exit secure world + * general use. + *****************************************************************************/ +void secureworld_exit() +{ + unsigned long i; + + /* configrue non-secure access control register */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i)); + /* enabling co-processor CP10 and CP11 accesses in NS world */ + __asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i)); + /* + * allow allocation of locked TLBs and L2 lines in NS world + * allow use of PLE registers in NS world also + */ + __asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i)); + + /* Enable ASA in ACR register */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); + __asm__ __volatile__("orr %0, %0, #0x10":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); + + /* Exiting secure world */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i)); + __asm__ __volatile__("orr %0, %0, #0x31":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i)); +} + +/****************************************************************************** + * Routine: setup_auxcr() + * Description: Write to AuxCR desired value using SMI. + * general use. + *****************************************************************************/ +void setup_auxcr() +{ + unsigned long i; + volatile unsigned int j; + /* Save r0, r12 and restore them after usage */ + __asm__ __volatile__("mov %0, r12":"=r"(j)); + __asm__ __volatile__("mov %0, r0":"=r"(i)); + + /* + * GP Device ROM code API usage here + * r12 = AUXCR Write function and r0 value + */ + __asm__ __volatile__("mov r12, #0x3"); + __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); + /* Enabling ASA */ + __asm__ __volatile__("orr r0, r0, #0x10"); + /* Enable L1NEON */ + __asm__ __volatile__("orr r0, r0, #1 << 5"); + /* SMI instruction to call ROM Code API */ + __asm__ __volatile__(".word 0xE1600070"); + /* Set PLD_FWD bit in L2AUXCR (Cortex-A8 erratum 725233 workaround) */ + __asm__ __volatile__("mov r12, #0x2"); + __asm__ __volatile__("mrc p15, 1, r0, c9, c0, 2"); + __asm__ __volatile__("orr r0, r0, #1 << 27"); + /* SMI instruction to call ROM Code API */ + __asm__ __volatile__(".word 0xE1600070"); + __asm__ __volatile__("mov r0, %0":"=r"(i)); + __asm__ __volatile__("mov r12, %0":"=r"(j)); +} + +/****************************************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP/EMU(special) type, unlock the SRAM for + * general use. + *****************************************************************************/ +void try_unlock_memory() +{ + int mode; + int in_sdram = is_running_in_sdram(); + + /* + * if GP device unlock device SRAM for general use + * secure code breaks for Secure/Emulation device - HS/E/T + */ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock_mem(); + + /* + * If device is EMU and boot is XIP external booting + * Unlock firewalls and disable L2 and put chip + * out of secure world + * + * Assuming memories are unlocked by the demon who put us in SDRAM + */ + if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F) + && (!in_sdram)) { + secure_unlock_mem(); + secureworld_exit(); + } + + return; +} + +/****************************************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called path is with SRAM stack. + *****************************************************************************/ +void s_init(void) +{ + int in_sdram = is_running_in_sdram(); + + watchdog_init(); + + try_unlock_memory(); + + /* + * Right now flushing at low MPU speed. + * Need to move after clock init + */ + invalidate_dcache(get_device_type()); +#ifndef CONFIG_ICACHE_OFF + icache_enable(); +#endif + +#ifdef CONFIG_L2_OFF + l2_cache_disable(); +#else + l2_cache_enable(); +#endif + /* + * Writing to AuxCR in U-boot using SMI for GP DEV + * Currently SMI in Kernel on ES2 devices seems to have an issue + * Once that is resolved, we can postpone this config to kernel + */ + if (get_device_type() == GP_DEVICE) + setup_auxcr(); + + set_muxconf_regs(); + delay(100); + + prcm_init(); + + per_clocks_enable(); + + if (!in_sdram) + sdrc_init(); +} + +/****************************************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + *****************************************************************************/ +void wait_for_command_complete(struct watchdog *wd_base) +{ + int pending = 1; + do { + pending = readl(&wd_base->wwps); + } while (pending); +} + +/****************************************************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************************************************/ +void watchdog_init(void) +{ + struct watchdog *wd2_base = (struct watchdog *)WD2_BASE; + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + + /* + * There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + + sr32(&prcm_base->fclken_wkup, 5, 1, 1); + sr32(&prcm_base->iclken_wkup, 5, 1, 1); + wait_on_value(ST_WDT2, 0x20, &prcm_base->idlest_wkup, 5); + + writel(WD_UNLOCK1, &wd2_base->wspr); + wait_for_command_complete(wd2_base); + writel(WD_UNLOCK2, &wd2_base->wspr); +} + +/****************************************************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + *****************************************************************************/ +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0 = 0, size1 = 0; + + /* + * If a second bank of DDR is attached to CS1 this is + * where it can be started. Early init code will init + * memory on CS0. + */ + if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { + do_sdrc_init(CS1, NOT_EARLY); + make_cs1_contiguous(); + } + + size0 = get_sdr_cs_size(CS0); + size1 = get_sdr_cs_size(CS1); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; + + return 0; +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} + +#ifdef CONFIG_NAND_OMAP_GPMC +/****************************************************************************** + * OMAP3 specific command to switch between NAND HW and SW ecc + *****************************************************************************/ +static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + if (argc != 2) + goto usage; + if (strncmp(argv[1], "hw", 2) == 0) + omap_nand_switch_ecc(1); + else if (strncmp(argv[1], "sw", 2) == 0) + omap_nand_switch_ecc(0); + else + goto usage; + + return 0; + +usage: + printf ("Usage: nandecc %s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD( + nandecc, 2, 1, do_switch_ecc, + "switch OMAP3 NAND ECC calculation algorithm", + "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm" +); + +#endif /* CONFIG_NAND_OMAP_GPMC */ + +#ifdef CONFIG_DISPLAY_BOARDINFO +/** + * Print board information + */ +int checkboard (void) +{ + char *mem_s ; + + if (is_mem_sdr()) + mem_s = "mSDR"; + else + mem_s = "LPDDR"; + + printf("%s + %s/%s\n", sysinfo.board_string, mem_s, + sysinfo.nand_string); + + return 0; +} +#endif /* CONFIG_DISPLAY_BOARDINFO */ diff --git a/arch/arm/cpu/arm_cortexa8/omap3/cache.S b/arch/arm/cpu/arm_cortexa8/omap3/cache.S new file mode 100644 index 0000000000..0f63815359 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/cache.S @@ -0,0 +1,191 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * + * This file is based on and replaces the existing cache.c file + * The copyrights for the cache.c file are: + * + * (C) Copyright 2008 Texas Insturments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/omap3.h> + +/* + * omap3 cache code + */ + +.align 5 +.global invalidate_dcache +.global l2_cache_enable +.global l2_cache_disable + +/* + * invalidate_dcache() + * + * Invalidate the whole D-cache. + * + * Corrupted registers: r0-r5, r7, r9-r11 + * + * - mm - mm_struct describing address space + */ +invalidate_dcache: + stmfd r13!, {r0 - r5, r7, r9 - r12, r14} + + mov r7, r0 @ take a backup of device type + cmp r0, #0x3 @ check if the device type is + @ GP + moveq r12, #0x1 @ set up to invalide L2 +smi: .word 0x01600070 @ Call SMI monitor (smieq) + cmp r7, #0x3 @ compare again in case its + @ lost + beq finished_inval @ if GP device, inval done + @ above + + mrc p15, 1, r0, c0, c0, 1 @ read clidr + ands r3, r0, #0x7000000 @ extract loc from clidr + mov r3, r3, lsr #23 @ left align loc bit field + beq finished_inval @ if loc is 0, then no need to + @ clean + mov r10, #0 @ start clean at cache level 0 +inval_loop1: + add r2, r10, r10, lsr #1 @ work out 3x current cache + @ level + mov r1, r0, lsr r2 @ extract cache type bits from + @ clidr + and r1, r1, #7 @ mask of the bits for current + @ cache only + cmp r1, #2 @ see what cache we have at + @ this level + blt skip_inval @ skip if no cache, or just + @ i-cache + mcr p15, 2, r10, c0, c0, 0 @ select current cache level + @ in cssr + mov r2, #0 @ operand for mcr SBZ + mcr p15, 0, r2, c7, c5, 4 @ flush prefetch buffer to + @ sych the new cssr&csidr, + @ with armv7 this is 'isb', + @ but we compile with armv5 + mrc p15, 1, r1, c0, c0, 0 @ read the new csidr + and r2, r1, #7 @ extract the length of the + @ cache lines + add r2, r2, #4 @ add 4 (line length offset) + ldr r4, =0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the + @ way size + clz r5, r4 @ find bit position of way + @ size increment + ldr r7, =0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the + @ index size +inval_loop2: + mov r9, r4 @ create working copy of max + @ way size +inval_loop3: + orr r11, r10, r9, lsl r5 @ factor way and cache number + @ into r11 + orr r11, r11, r7, lsl r2 @ factor index number into r11 + mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way + subs r9, r9, #1 @ decrement the way + bge inval_loop3 + subs r7, r7, #1 @ decrement the index + bge inval_loop2 +skip_inval: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt inval_loop1 +finished_inval: + mov r10, #0 @ swith back to cache level 0 + mcr p15, 2, r10, c0, c0, 0 @ select current cache level + @ in cssr + mcr p15, 0, r10, c7, c5, 4 @ flush prefetch buffer, + @ with armv7 this is 'isb', + @ but we compile with armv5 + + ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} + + +l2_cache_enable: + push {r0, r1, r2, lr} + @ ES2 onwards we can disable/enable L2 ourselves + bl get_cpu_rev + cmp r0, #CPU_3XX_ES20 + blt l2_cache_disable_EARLIER_THAN_ES2 + mrc 15, 0, r3, cr1, cr0, 1 + orr r3, r3, #2 + mcr 15, 0, r3, cr1, cr0, 1 + b l2_cache_enable_END +l2_cache_enable_EARLIER_THAN_ES2: + @ Save r0, r12 and restore them after usage + mov r3, ip + str r3, [sp, #4] + mov r3, r0 + @ + @ GP Device ROM code API usage here + @ r12 = AUXCR Write function and r0 value + @ + mov ip, #3 + mrc 15, 0, r0, cr1, cr0, 1 + orr r0, r0, #2 + @ SMI instruction to call ROM Code API + .word 0xe1600070 + mov r0, r3 + mov ip, r3 + str r3, [sp, #4] +l2_cache_enable_END: + pop {r1, r2, r3, pc} + + +l2_cache_disable: + push {r0, r1, r2, lr} + @ ES2 onwards we can disable/enable L2 ourselves + bl get_cpu_rev + cmp r0, #CPU_3XX_ES20 + blt l2_cache_disable_EARLIER_THAN_ES2 + mrc 15, 0, r3, cr1, cr0, 1 + bic r3, r3, #2 + mcr 15, 0, r3, cr1, cr0, 1 + b l2_cache_disable_END +l2_cache_disable_EARLIER_THAN_ES2: + @ Save r0, r12 and restore them after usage + mov r3, ip + str r3, [sp, #4] + mov r3, r0 + @ + @ GP Device ROM code API usage here + @ r12 = AUXCR Write function and r0 value + @ + mov ip, #3 + mrc 15, 0, r0, cr1, cr0, 1 + bic r0, r0, #2 + @ SMI instruction to call ROM Code API + .word 0xe1600070 + mov r0, r3 + mov ip, r3 + str r3, [sp, #4] +l2_cache_disable_END: + pop {r1, r2, r3, pc} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/clock.c b/arch/arm/cpu/arm_cortexa8/omap3/clock.c new file mode 100644 index 0000000000..6330c9e5da --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/clock.c @@ -0,0 +1,416 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Derived from Beagle Board and OMAP3 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clocks.h> +#include <asm/arch/clocks_omap3.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <environment.h> +#include <command.h> + +/****************************************************************************** + * get_sys_clk_speed() - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *****************************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, cdiv, val; + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + struct prm *prm_base = (struct prm *)PRM_BASE; + struct gptimer *gpt1_base = (struct gptimer *)OMAP34XX_GPT1; + struct s32ktimer *s32k_base = (struct s32ktimer *)SYNC_32KTIMER_BASE; + + val = readl(&prm_base->clksrc_ctrl); + + if (val & SYSCLKDIV_2) + cdiv = 2; + else if (val & SYSCLKDIV_1) + cdiv = 1; + else + /* + * Should never reach here! (Assume divider as 1) + */ + cdiv = 1; + + /* enable timer2 */ + val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1; + + /* select sys_clk for GPT1 */ + writel(val, &prcm_base->clksel_wkup); + + /* Enable I and F Clocks for GPT1 */ + val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC; + writel(val, &prcm_base->iclken_wkup); + + val = readl(&prcm_base->fclken_wkup) | EN_GPT1; + writel(val, &prcm_base->fclken_wkup); + + writel(0, &gpt1_base->tldr); /* start counting at 0 */ + writel(GPT_EN, &gpt1_base->tclr); /* enable clock */ + + /* enable 32kHz source, determine sys_clk via gauging */ + + /* start time in 20 cycles */ + start = 20 + readl(&s32k_base->s32k_cr); + + /* dead loop till start time */ + while (readl(&s32k_base->s32k_cr) < start); + + /* get start sys_clk count */ + cstart = readl(&gpt1_base->tcrr); + + /* wait for 40 cycles */ + while (readl(&s32k_base->s32k_cr) < (start + 20)) ; + cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + if (cdiv == 2) + { + cdiff *= 2; + } + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * input oscillator clock frequency. + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + switch(osc_clk) { + case S38_4M: + *sys_clkin_sel = 4; + break; + case S26M: + *sys_clkin_sel = 3; + break; + case S19_2M: + *sys_clkin_sel = 2; + break; + case S13M: + *sys_clkin_sel = 1; + break; + case S12M: + default: + *sys_clkin_sel = 0; + } +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + void (*f_lock_pll) (u32, u32, u32, u32); + int xip_safe, p0, p1, p2, p3; + u32 osc_clk = 0, sys_clkin_sel; + u32 clk_index, sil_index = 0; + struct prm *prm_base = (struct prm *)PRM_BASE; + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *dpll_param_p; + + f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + + SRAM_VECT_CODE); + + xip_safe = is_running_in_sram(); + + /* + * Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + /* set input crystal speed */ + sr32(&prm_base->clksel, 0, 3, sys_clkin_sel); + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + /* input clock divider */ + sr32(&prm_base->clksrc_ctrl, 6, 2, 2); + clk_index = sys_clkin_sel / 2; + } else { + /* input clock divider */ + sr32(&prm_base->clksrc_ctrl, 6, 2, 1); + clk_index = sys_clkin_sel; + } + + /* + * The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + if (get_cpu_rev()) + sil_index = 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, LDELAY); + + /* Getting the base address of Core DPLL param table */ + dpll_param_p = (dpll_param *) get_core_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + if (xip_safe) { + /* + * CORE DPLL + * sr32(CM_CLKSEL2_EMU) set override to work when asleep + */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen, + LDELAY); + + /* + * For OMAP3 ES1.0 Errata 1.50, default value directly doesn't + * work. write another value and then default value. + */ + + /* m3x2 */ + sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2 + 1); + /* m3x2 */ + sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2); + /* Set M2 */ + sr32(&prcm_base->clksel1_pll, 27, 2, dpll_param_p->m2); + /* Set M */ + sr32(&prcm_base->clksel1_pll, 16, 11, dpll_param_p->m); + /* Set N */ + sr32(&prcm_base->clksel1_pll, 8, 7, dpll_param_p->n); + /* 96M Src */ + sr32(&prcm_base->clksel1_pll, 6, 1, 0); + /* ssi */ + sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV); + /* fsusb */ + sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV); + /* l4 */ + sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV); + /* l3 */ + sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV); + /* gfx */ + sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV); + /* reset mgr */ + sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM); + /* FREQSEL */ + sr32(&prcm_base->clken_pll, 4, 4, dpll_param_p->fsel); + /* lock mode */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK); + + wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen, + LDELAY); + } else if (is_running_in_flash()) { + /* + * if running from flash, jump to small relocated code + * area in SRAM. + */ + p0 = readl(&prcm_base->clken_pll); + sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); + sr32(&p0, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + + p1 = readl(&prcm_base->clksel1_pll); + sr32(&p1, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(&p1, 16, 11, dpll_param_p->m); /* Set M */ + sr32(&p1, 8, 7, dpll_param_p->n); /* Set N */ + sr32(&p1, 6, 1, 0); /* set source for 96M */ + + p2 = readl(&prcm_base->clksel_core); + sr32(&p2, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(&p2, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(&p2, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(&p2, 0, 2, CORE_L3_DIV); /* l3 */ + + p3 = (u32)&prcm_base->idlest_ckgen; + + (*f_lock_pll) (p0, p1, p2, p3); + } + + /* PER DPLL */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP); + wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); + + /* Getting the base address to PER DPLL param table */ + + /* Set N */ + dpll_param_p = (dpll_param *) get_per_dpll_param(); + + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + + /* + * Errata 1.50 Workaround for OMAP3 ES1.0 only + * If using default divisors, write default divisor + 1 + * and then the actual divisor value + */ + sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2 + 1); /* set M6 */ + sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2); /* set M6 */ + sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2 + 1); /* set M5 */ + sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2); /* set M5 */ + sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2 + 1); /* set M4 */ + sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2); /* set M4 */ + sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2 + 1); /* set M3 */ + sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2); /* set M3 */ + sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2 + 1); /* set M2 */ + sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2); /* set M2 */ + /* Workaround end */ + + sr32(&prcm_base->clksel2_pll, 8, 11, dpll_param_p->m); /* set m */ + sr32(&prcm_base->clksel2_pll, 0, 7, dpll_param_p->n); /* set n */ + sr32(&prcm_base->clken_pll, 20, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); + + /* Getting the base address to MPU DPLL param table */ + dpll_param_p = (dpll_param *) get_mpu_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* MPU DPLL (unlocked already) */ + + /* Set M2 */ + sr32(&prcm_base->clksel2_pll_mpu, 0, 5, dpll_param_p->m2); + /* Set M */ + sr32(&prcm_base->clksel1_pll_mpu, 8, 11, dpll_param_p->m); + /* Set N */ + sr32(&prcm_base->clksel1_pll_mpu, 0, 7, dpll_param_p->n); + /* FREQSEL */ + sr32(&prcm_base->clken_pll_mpu, 4, 4, dpll_param_p->fsel); + /* lock mode */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); + wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, LDELAY); + + /* Getting the base address to IVA DPLL param table */ + dpll_param_p = (dpll_param *) get_iva_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP); + wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY); + /* set M2 */ + sr32(&prcm_base->clksel2_pll_iva2, 0, 5, dpll_param_p->m2); + /* set M */ + sr32(&prcm_base->clksel1_pll_iva2, 8, 11, dpll_param_p->m); + /* set N */ + sr32(&prcm_base->clksel1_pll_iva2, 0, 7, dpll_param_p->n); + /* FREQSEL */ + sr32(&prcm_base->clken_pll_iva2, 4, 4, dpll_param_p->fsel); + /* lock mode */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK); + wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(&prcm_base->clksel_per, 0, 8, 0xff); + sr32(&prcm_base->clksel_wkup, 0, 1, 1); + + sdelay(5000); +} + +/****************************************************************************** + * peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...) + *****************************************************************************/ +void per_clocks_enable(void) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + + /* Enable GP2 timer. */ + sr32(&prcm_base->clksel_per, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(&prcm_base->iclken_per, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(&prcm_base->fclken_per, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CONFIG_SYS_NS16550 + /* Enable UART1 clocks */ + sr32(&prcm_base->fclken1_core, 13, 1, 0x1); + sr32(&prcm_base->iclken1_core, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(&prcm_base->fclken_per, 11, 1, 0x1); + sr32(&prcm_base->iclken_per, 11, 1, 0x1); +#endif + +#ifdef CONFIG_OMAP3_GPIO_2 + sr32(&prcm_base->fclken_per, 13, 1, 1); + sr32(&prcm_base->iclken_per, 13, 1, 1); +#endif +#ifdef CONFIG_OMAP3_GPIO_3 + sr32(&prcm_base->fclken_per, 14, 1, 1); + sr32(&prcm_base->iclken_per, 14, 1, 1); +#endif +#ifdef CONFIG_OMAP3_GPIO_4 + sr32(&prcm_base->fclken_per, 15, 1, 1); + sr32(&prcm_base->iclken_per, 15, 1, 1); +#endif +#ifdef CONFIG_OMAP3_GPIO_5 + sr32(&prcm_base->fclken_per, 16, 1, 1); + sr32(&prcm_base->iclken_per, 16, 1, 1); +#endif +#ifdef CONFIG_OMAP3_GPIO_6 + sr32(&prcm_base->fclken_per, 17, 1, 1); + sr32(&prcm_base->iclken_per, 17, 1, 1); +#endif + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(&prcm_base->fclken1_core, 15, 3, 0x7); + sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(&prcm_base->iclken_wkup, 2, 1, 0x1); + + sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON); + sr32(&prcm_base->fclken1_core, 0, 32, FCK_CORE1_ON); + sr32(&prcm_base->iclken1_core, 0, 32, ICK_CORE1_ON); + sr32(&prcm_base->iclken2_core, 0, 32, ICK_CORE2_ON); + sr32(&prcm_base->fclken_wkup, 0, 32, FCK_WKUP_ON); + sr32(&prcm_base->iclken_wkup, 0, 32, ICK_WKUP_ON); + sr32(&prcm_base->fclken_dss, 0, 32, FCK_DSS_ON); + sr32(&prcm_base->iclken_dss, 0, 32, ICK_DSS_ON); + sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON); + sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON); + sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON); + sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON); + + sdelay(1000); +} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/gpio.c b/arch/arm/cpu/arm_cortexa8/omap3/gpio.c new file mode 100644 index 0000000000..aeb6066d89 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/gpio.c @@ -0,0 +1,185 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This work is derived from the linux 2.6.27 kernel source + * To fetch, use the kernel repository + * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + * Use the v2.6.27 tag. + * + * Below is the original's header including its copyright + * + * linux/arch/arm/plat-omap/gpio.c + * + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <common.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> +#include <asm/errno.h> + +static struct gpio_bank gpio_bank_34xx[6] = { + { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX }, +}; + +static struct gpio_bank *gpio_bank = &gpio_bank_34xx[0]; + +static inline struct gpio_bank *get_gpio_bank(int gpio) +{ + return &gpio_bank[gpio >> 5]; +} + +static inline int get_gpio_index(int gpio) +{ + return gpio & 0x1f; +} + +static inline int gpio_valid(int gpio) +{ + if (gpio < 0) + return -1; + if (gpio < 192) + return 0; + return -1; +} + +static int check_gpio(int gpio) +{ + if (gpio_valid(gpio) < 0) { + printf("ERROR : check_gpio: invalid GPIO %d\n", gpio); + return -1; + } + return 0; +} + +static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) +{ + void *reg = bank->base; + u32 l; + + switch (bank->method) { + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; + default: + return; + } + l = __raw_readl(reg); + if (is_input) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + __raw_writel(l, reg); +} + +void omap_set_gpio_direction(int gpio, int is_input) +{ + struct gpio_bank *bank; + + if (check_gpio(gpio) < 0) + return; + bank = get_gpio_bank(gpio); + _set_gpio_direction(bank, get_gpio_index(gpio), is_input); +} + +static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) +{ + void *reg = bank->base; + u32 l = 0; + + switch (bank->method) { + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETDATAOUT; + else + reg += OMAP24XX_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; + default: + printf("omap3-gpio unknown bank method %s %d\n", + __FILE__, __LINE__); + return; + } + __raw_writel(l, reg); +} + +void omap_set_gpio_dataout(int gpio, int enable) +{ + struct gpio_bank *bank; + + if (check_gpio(gpio) < 0) + return; + bank = get_gpio_bank(gpio); + _set_gpio_dataout(bank, get_gpio_index(gpio), enable); +} + +int omap_get_gpio_datain(int gpio) +{ + struct gpio_bank *bank; + void *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + bank = get_gpio_bank(gpio); + reg = bank->base; + switch (bank->method) { + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAIN; + break; + default: + return -EINVAL; + } + return (__raw_readl(reg) + & (1 << get_gpio_index(gpio))) != 0; +} + +static void _reset_gpio(struct gpio_bank *bank, int gpio) +{ + _set_gpio_direction(bank, get_gpio_index(gpio), 1); +} + +int omap_request_gpio(int gpio) +{ + if (check_gpio(gpio) < 0) + return -EINVAL; + + return 0; +} + +void omap_free_gpio(int gpio) +{ + struct gpio_bank *bank; + + if (check_gpio(gpio) < 0) + return; + bank = get_gpio_bank(gpio); + + _reset_gpio(bank, gpio); +} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/lowlevel_init.S b/arch/arm/cpu/arm_cortexa8/omap3/lowlevel_init.S new file mode 100644 index 0000000000..73063ec8e6 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/lowlevel_init.S @@ -0,0 +1,361 @@ +/* + * Board specific setup info + * + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Initial Code by: + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks_omap3.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3 - r10} /* copy from source address [r0] */ + stmia r1!, {r3 - r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* *************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this + * code runs from flash before SDR is init so that should be ok. + ****************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4 - r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4 - r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll, mux, memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ + +/* + * Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct (clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1 +/* ES2 */ +.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2 +/* 3410 */ +.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12 + +/* 13MHz */ +/* ES1 */ +.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1 +/* ES2 */ +.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2 +/* 3410 */ +.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1 +/* ES2 */ +.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2 +/* 3410 */ +.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1 +/* ES2 */ +.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2 +/* 3410 */ +.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1 +/* ES2 */ +.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2 +/* 3410 */ +.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1 +/* ES2 */ +.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2 +/* 3410 */ +.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12 + +/* 13MHz */ +/* ES1 */ +.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1 +/* ES2 */ +.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2 +/* 3410 */ +.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1 +/* ES2 */ +.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2 +/* 3410 */ +.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1 +/* ES2 */ +.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2 +/* 3410 */ +.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1 +/* ES2 */ +.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2 +/* 3410 */ +.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1 +/* ES2 */ +.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 +/* 3410 */ +.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 + +/* 13MHz */ +/* ES1 */ +.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1 +/* ES2 */ +.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 +/* 3410 */ +.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1 +/* ES2 */ +.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 +/* 3410 */ +.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1 +/* ES2 */ +.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 +/* 3410 */ +.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1 +/* ES2 */ +.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 +/* 3410 */ +.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12 + +/* 13MHz */ +.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13 + +/* 19.2MHz */ +.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2 + +/* 26MHz */ +.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26 + +/* 38.4MHz */ +.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr diff --git a/arch/arm/cpu/arm_cortexa8/omap3/mem.c b/arch/arm/cpu/arm_cortexa8/omap3/mem.c new file mode 100644 index 0000000000..dfb7e4c2ad --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/mem.c @@ -0,0 +1,281 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Initial Code from: + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <command.h> + +/* + * Only One NAND allowed on board at a time. + * The GPMC CS Base for the same + */ +unsigned int boot_flash_base; +unsigned int boot_flash_off; +unsigned int boot_flash_sec; +unsigned int boot_flash_type; +volatile unsigned int boot_flash_env_addr; + +struct gpmc *gpmc_cfg; + +#if defined(CONFIG_CMD_NAND) +static const u32 gpmc_m_nand[GPMC_MAX_REG] = { + M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, 0 +}; + +#if defined(CONFIG_ENV_IS_IN_NAND) +#define GPMC_CS 0 +#else +#define GPMC_CS 1 +#endif + +#endif + +#if defined(CONFIG_CMD_ONENAND) +static const u32 gpmc_onenand[GPMC_MAX_REG] = { + ONENAND_GPMC_CONFIG1, + ONENAND_GPMC_CONFIG2, + ONENAND_GPMC_CONFIG3, + ONENAND_GPMC_CONFIG4, + ONENAND_GPMC_CONFIG5, + ONENAND_GPMC_CONFIG6, 0 +}; + +#if defined(CONFIG_ENV_IS_IN_ONENAND) +#define GPMC_CS 0 +#else +#define GPMC_CS 1 +#endif + +#endif + +static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; + +/************************************************************************** + * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow + * command line mem=xyz use all memory with out discontinuous support + * compiled in. Could do it at the ATAG, but there really is two banks... + * Called as part of 2nd phase DDR init. + **************************************************************************/ +void make_cs1_contiguous(void) +{ + u32 size, a_add_low, a_add_high; + + size = get_sdr_cs_size(CS0); + size >>= 25; /* divide by 32 MiB to find size to offset CS1 */ + a_add_high = (size & 3) << 8; /* set up low field */ + a_add_low = (size & 0x3C) >> 2; /* set up high field */ + writel((a_add_high | a_add_low), &sdrc_base->cs_cfg); + +} + +/******************************************************** + * mem_ok() - test used to see if timings are correct + * for a part. Helps in guessing which part + * we are currently using. + *******************************************************/ +u32 mem_ok(u32 cs) +{ + u32 val1, val2, addr; + u32 pattern = 0x12345678; + + addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs); + + writel(0x0, addr + 0x400); /* clear pos A */ + writel(pattern, addr); /* pattern to pos B */ + writel(0x0, addr + 4); /* remove pattern off the bus */ + val1 = readl(addr + 0x400); /* get pos A value */ + val2 = readl(addr); /* get val2 */ + + if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ + return 0; + else + return 1; +} + +/******************************************************** + * sdrc_init() - init the sdrc chip selects CS0 and CS1 + * - early init routines, called from flash or + * SRAM. + *******************************************************/ +void sdrc_init(void) +{ + /* only init up first bank here */ + do_sdrc_init(CS0, EARLY_INIT); +} + +/************************************************************************* + * do_sdrc_init(): initialize the SDRAM for use. + * -code sets up SDRAM basic SDRC timings for CS0 + * -optimal settings can be placed here, or redone after i2c + * inspection of board info + * + * - code called once in C-Stack only context for CS0 and a possible 2nd + * time depending on memory configuration from stack+global context + **************************************************************************/ + +void do_sdrc_init(u32 cs, u32 early) +{ + struct sdrc_actim *sdrc_actim_base; + + if(cs) + sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; + else + sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; + + if (early) { + /* reset sdrc controller */ + writel(SOFTRESET, &sdrc_base->sysconfig); + wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status, + 12000000); + writel(0, &sdrc_base->sysconfig); + + /* setup sdrc to ball mux */ + writel(SDRC_SHARING, &sdrc_base->sharing); + + /* Disable Power Down of CKE cuz of 1 CKE on combo part */ + writel(WAKEUPPROC | PWDNEN | SRFRONRESET | PAGEPOLICY_HIGH, + &sdrc_base->power); + + writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); + sdelay(0x20000); + } + + writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY | + RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 | + DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg); + writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl); + writel(V_ACTIMA_165, &sdrc_actim_base->ctrla); + writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb); + + writel(CMD_NOP, &sdrc_base ->cs[cs].manual); + writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + + /* + * CAS latency 3, Write Burst = Read Burst, Serial Mode, + * Burst length = 4 + */ + writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr); + + if (!mem_ok(cs)) + writel(0, &sdrc_base->cs[cs].mcfg); +} + +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size) +{ + writel(0, &cs->config7); + sdelay(1000); + /* Delay for settling */ + writel(gpmc_config[0], &cs->config1); + writel(gpmc_config[1], &cs->config2); + writel(gpmc_config[2], &cs->config3); + writel(gpmc_config[3], &cs->config4); + writel(gpmc_config[4], &cs->config5); + writel(gpmc_config[5], &cs->config6); + /* Enable the config */ + writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | + (1 << 6)), &cs->config7); + sdelay(2000); +} + +/***************************************************** + * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + /* putting a blanket check on GPMC based on ZeBu for now */ + gpmc_cfg = (struct gpmc *)GPMC_BASE; +#if defined(CONFIG_CMD_NAND) || defined(CONFIG_CMD_ONENAND) + const u32 *gpmc_config = NULL; + u32 base = 0; + u32 size = 0; +#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND) + u32 f_off = CONFIG_SYS_MONITOR_LEN; + u32 f_sec = 0; +#endif +#endif + u32 config = 0; + + /* global settings */ + writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */ + writel(0, &gpmc_cfg->timeout_control);/* timeout disable */ + + config = readl(&gpmc_cfg->config); + config &= (~0xf00); + writel(config, &gpmc_cfg->config); + + /* + * Disable the GPMC0 config set by ROM code + * It conflicts with our MPDB (both at 0x08000000) + */ + writel(0, &gpmc_cfg->cs[0].config7); + sdelay(1000); + +#if defined(CONFIG_CMD_NAND) /* CS 0 */ + gpmc_config = gpmc_m_nand; + + base = PISMO1_NAND_BASE; + size = PISMO1_NAND_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +#if defined(CONFIG_ENV_IS_IN_NAND) + f_off = SMNAND_ENV_OFFSET; + f_sec = (128 << 10); /* 128 KiB */ + /* env setup */ + boot_flash_base = base; + boot_flash_off = f_off; + boot_flash_sec = f_sec; + boot_flash_env_addr = f_off; +#endif +#endif + +#if defined(CONFIG_CMD_ONENAND) + gpmc_config = gpmc_onenand; + base = PISMO1_ONEN_BASE; + size = PISMO1_ONEN_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +#if defined(CONFIG_ENV_IS_IN_ONENAND) + f_off = ONENAND_ENV_OFFSET; + f_sec = (128 << 10); /* 128 KiB */ + /* env setup */ + boot_flash_base = base; + boot_flash_off = f_off; + boot_flash_sec = f_sec; + boot_flash_env_addr = f_off; +#endif +#endif +} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/reset.S b/arch/arm/cpu/arm_cortexa8/omap3/reset.S new file mode 100644 index 0000000000..a53c408195 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/reset.S @@ -0,0 +1,36 @@ +/* + * Copyright (c) 2009 Samsung Electronics. + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +.global reset_cpu +reset_cpu: + ldr r1, rstctl @ get addr for global reset + @ reg + mov r3, #0x2 @ full reset pll + mpu + str r3, [r1] @ force reset + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PRM_RSTCTRL diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c b/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c new file mode 100644 index 0000000000..08fb32eaae --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c @@ -0,0 +1,299 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> /* get mem tables */ +#include <asm/arch/sys_proto.h> +#include <i2c.h> + +extern omap3_sysinfo sysinfo; +static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; +static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; +static char *rev_s[CPU_3XX_MAX_REV] = { + "1.0", + "2.0", + "2.1", + "3.0", + "3.1"}; + +/***************************************************************** + * dieid_num_r(void) - read and set die ID + *****************************************************************/ +void dieid_num_r(void) +{ + struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; + char *uid_s, die_id[34]; + u32 id[4]; + + memset(die_id, 0, sizeof(die_id)); + + uid_s = getenv("dieid#"); + + if (uid_s == NULL) { + id[3] = readl(&id_base->die_id_0); + id[2] = readl(&id_base->die_id_1); + id[1] = readl(&id_base->die_id_2); + id[0] = readl(&id_base->die_id_3); + sprintf(die_id, "%08x%08x%08x%08x", id[0], id[1], id[2], id[3]); + setenv("dieid#", die_id); + uid_s = die_id; + } + + printf("Die ID #%s\n", uid_s); +} + +/****************************************** + * get_cpu_type(void) - extract cpu info + ******************************************/ +u32 get_cpu_type(void) +{ + return readl(&ctrl_base->ctrl_omap_stat); +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = 0; + struct ctrl_id *id_base; + + /* + * On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate between ES1.0 and > ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); + if ((cpuid & 0xf) == 0x0) + return CPU_3XX_ES10; + else { + /* Decode the IDs on > ES1.0 */ + id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE; + + cpuid = (readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf; + + /* Some early ES2.0 seem to report ID 0, fix this */ + if(cpuid == 0) + cpuid = CPU_3XX_ES20; + + return cpuid; + } +} + +/**************************************************** + * is_mem_sdr() - return 1 if mem type in use is SDR + ****************************************************/ +u32 is_mem_sdr(void) +{ + if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR) + return 1; + return 0; +} + +/*********************************************************************** + * get_cs0_size() - get size of chip select 0/1 + ************************************************************************/ +u32 get_sdr_cs_size(u32 cs) +{ + u32 size; + + /* get ram size field */ + size = readl(&sdrc_base->cs[cs].mcfg) >> 8; + size &= 0x3FF; /* remove unwanted bits */ + size <<= 21; /* multiply by 2 MiB to find size in MB */ + return size; +} + +/*********************************************************************** + * get_sdr_cs_offset() - get offset of cs from cs0 start + ************************************************************************/ +u32 get_sdr_cs_offset(u32 cs) +{ + u32 offset; + + if (!cs) + return 0; + + offset = readl(&sdrc_base->cs_cfg); + offset = (offset & 15) << 27 | (offset & 0x30) >> 17; + + return offset; +} + +/*************************************************************************** + * get_gpmc0_base() - Return current address hardware will be + * fetching from. The below effectively gives what is correct, its a bit + * mis-leading compared to the TRM. For the most general case the mask + * needs to be also taken into account this does work in practice. + * - for u-boot we currently map: + * -- 0 to nothing, + * -- 4 to flash + * -- 8 to enent + * -- c to wifi + ****************************************************************************/ +u32 get_gpmc0_base(void) +{ + u32 b; + + b = readl(&gpmc_cfg->cs[0].config7); + b &= 0x1F; /* keep base [5:0] */ + b = b << 24; /* ret 0x0b000000 */ + return b; +} + +/******************************************************************* + * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) + *******************************************************************/ +u32 get_gpmc0_width(void) +{ + return WIDTH_16BIT; +} + +/************************************************************************* + * get_board_rev() - setup to pass kernel board revision information + * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) + *************************************************************************/ +u32 get_board_rev(void) +{ + return 0x20; +} + +/******************************************************** + * get_base(); get upper addr of current execution + *******************************************************/ +u32 get_base(void) +{ + u32 val; + + __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); + val &= 0xF0000000; + val >>= 28; + return val; +} + +/******************************************************** + * is_running_in_flash() - tell if currently running in + * FLASH. + *******************************************************/ +u32 is_running_in_flash(void) +{ + if (get_base() < 4) + return 1; /* in FLASH */ + + return 0; /* running in SRAM or SDRAM */ +} + +/******************************************************** + * is_running_in_sram() - tell if currently running in + * SRAM. + *******************************************************/ +u32 is_running_in_sram(void) +{ + if (get_base() == 4) + return 1; /* in SRAM */ + + return 0; /* running in FLASH or SDRAM */ +} + +/******************************************************** + * is_running_in_sdram() - tell if currently running in + * SDRAM. + *******************************************************/ +u32 is_running_in_sdram(void) +{ + if (get_base() > 4) + return 1; /* in SDRAM */ + + return 0; /* running in SRAM or FLASH */ +} + +/*************************************************************** + * get_boot_type() - Is this an XIP type device or a stream one + * bits 4-0 specify type. Bit 5 says mem/perif + ***************************************************************/ +u32 get_boot_type(void) +{ + return (readl(&ctrl_base->status) & SYSBOOT_MASK); +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8); +} + +#ifdef CONFIG_DISPLAY_CPUINFO +/** + * Print CPU information + */ +int print_cpuinfo (void) +{ + char *cpu_s, *sec_s; + + switch (get_cpu_type()) { + case OMAP3503: + cpu_s = "3503"; + break; + case OMAP3515: + cpu_s = "3515"; + break; + case OMAP3525: + cpu_s = "3525"; + break; + case OMAP3530: + cpu_s = "3530"; + break; + default: + cpu_s = "35XX"; + break; + } + + switch (get_device_type()) { + case TST_DEVICE: + sec_s = "TST"; + break; + case EMU_DEVICE: + sec_s = "EMU"; + break; + case HS_DEVICE: + sec_s = "HS"; + break; + case GP_DEVICE: + sec_s = "GP"; + break; + default: + sec_s = "?"; + } + + printf("OMAP%s-%s ES%s, CPU-OPP2 L3-165MHz\n", + cpu_s, sec_s, rev_s[get_cpu_rev()]); + + return 0; +} +#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/cpu/arm_cortexa8/omap3/syslib.c b/arch/arm/cpu/arm_cortexa8/omap3/syslib.c new file mode 100644 index 0000000000..9ced495c8d --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/syslib.c @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> +#include <asm/arch/sys_proto.h> + +/************************************************************ + * sdelay() - simple spin loop. Will be constant time as + * its generally used in bypass conditions only. This + * is necessary until timers are accessible. + * + * not inline to increase chances its in cache when called + *************************************************************/ +void sdelay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = readl((u32)addr) & ~(msk << start_bit); + tmp |= value << start_bit; + writel(tmp, (u32)addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr, + u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = readl((u32)read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/timer.c b/arch/arm/cpu/arm_cortexa8/omap3/timer.c new file mode 100644 index 0000000000..401bfe6d09 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/timer.c @@ -0,0 +1,138 @@ +/* + * (C) Copyright 2008 + * Texas Instruments + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Moahmmed Khasim <khasim@ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +static ulong timestamp; +static ulong lastinc; +static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; + +/* + * Nothing really to do with interrupts, just starts up a counter. + * We run the counter with 13MHz, divided by 8, resulting in timer + * frequency of 1.625MHz. With 32bit counter register, counter + * overflows in ~44min + */ + +/* 13MHz / 8 = 1.625MHz */ +#define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PTV)) +#define TIMER_LOAD_VAL 0xffffffff + +int timer_init(void) +{ + /* start the counter ticking up, reload value on overflow */ + writel(TIMER_LOAD_VAL, &timer_base->tldr); + /* enable timer */ + writel((CONFIG_SYS_PTV << 2) | TCLR_PRE | TCLR_AR | TCLR_ST, + &timer_base->tclr); + + reset_timer_masked(); /* init the timestamp and lastinc value */ + + return 0; +} + +/* + * timer without interrupts + */ +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + timestamp = t; +} + +/* delay x useconds */ +void __udelay(unsigned long usec) +{ + long tmo = usec * (TIMER_CLOCK / 1000) / 1000; + unsigned long now, last = readl(&timer_base->tcrr); + + while (tmo > 0) { + now = readl(&timer_base->tcrr); + if (last > now) /* count up timer overflow */ + tmo -= TIMER_LOAD_VAL - last + now; + else + tmo -= now - last; + last = now; + } +} + +void reset_timer_masked(void) +{ + /* reset time, capture current incrementer value time */ + lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ); + timestamp = 0; /* start "advancing" time stamp from 0 */ +} + +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ); + + if (now >= lastinc) /* normal mode (non roll) */ + /* move stamp fordward with absoulte diff ticks */ + timestamp += (now - lastinc); + else /* we have rollover of incrementer */ + timestamp += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ)) + - lastinc) + now; + lastinc = now; + return timestamp; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile b/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile new file mode 100644 index 0000000000..01c93feda8 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +SOBJS = cache.o +SOBJS += reset.o + +COBJS += clock.o +COBJS += cpu_info.o +COBJS += gpio.o +COBJS += sromc.o +COBJS += timer.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cache.S b/arch/arm/cpu/arm_cortexa8/s5pc1xx/cache.S new file mode 100644 index 0000000000..906118d820 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/cache.S @@ -0,0 +1,120 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * based on arch/arm/cpu/arm_cortexa8/omap3/cache.S + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/cpu.h> + +.align 5 +.global invalidate_dcache +.global l2_cache_enable +.global l2_cache_disable + +/* + * invalidate_dcache() + * Invalidate the whole D-cache. + * + * Corrupted registers: r0-r5, r7, r9-r11 + */ +invalidate_dcache: + stmfd r13!, {r0 - r5, r7, r9 - r12, r14} + + cmp r0, #0xC100 @ check if the cpu is s5pc100 + + beq finished_inval @ s5pc100 doesn't need this + @ routine + mrc p15, 1, r0, c0, c0, 1 @ read clidr + ands r3, r0, #0x7000000 @ extract loc from clidr + mov r3, r3, lsr #23 @ left align loc bit field + beq finished_inval @ if loc is 0, then no need to + @ clean + mov r10, #0 @ start clean at cache level 0 +inval_loop1: + add r2, r10, r10, lsr #1 @ work out 3x current cache + @ level + mov r1, r0, lsr r2 @ extract cache type bits from + @ clidr + and r1, r1, #7 @ mask of the bits for current + @ cache only + cmp r1, #2 @ see what cache we have at + @ this level + blt skip_inval @ skip if no cache, or just + @ i-cache + mcr p15, 2, r10, c0, c0, 0 @ select current cache level + @ in cssr + mov r2, #0 @ operand for mcr SBZ + mcr p15, 0, r2, c7, c5, 4 @ flush prefetch buffer to + @ sych the new cssr&csidr, + @ with armv7 this is 'isb', + @ but we compile with armv5 + mrc p15, 1, r1, c0, c0, 0 @ read the new csidr + and r2, r1, #7 @ extract the length of the + @ cache lines + add r2, r2, #4 @ add 4 (line length offset) + ldr r4, =0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the + @ way size + clz r5, r4 @ find bit position of way + @ size increment + ldr r7, =0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the + @ index size +inval_loop2: + mov r9, r4 @ create working copy of max + @ way size +inval_loop3: + orr r11, r10, r9, lsl r5 @ factor way and cache number + @ into r11 + orr r11, r11, r7, lsl r2 @ factor index number into r11 + mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way + subs r9, r9, #1 @ decrement the way + bge inval_loop3 + subs r7, r7, #1 @ decrement the index + bge inval_loop2 +skip_inval: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt inval_loop1 +finished_inval: + mov r10, #0 @ swith back to cache level 0 + mcr p15, 2, r10, c0, c0, 0 @ select current cache level + @ in cssr + mcr p15, 0, r10, c7, c5, 4 @ flush prefetch buffer, + @ with armv7 this is 'isb', + @ but we compile with armv5 + + ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} + +l2_cache_enable: + push {r0, r1, r2, lr} + mrc 15, 0, r3, cr1, cr0, 1 + orr r3, r3, #2 + mcr 15, 0, r3, cr1, cr0, 1 + pop {r1, r2, r3, pc} + +l2_cache_disable: + push {r0, r1, r2, lr} + mrc 15, 0, r3, cr1, cr0, 1 + bic r3, r3, #2 + mcr 15, 0, r3, cr1, cr0, 1 + pop {r1, r2, r3, pc} diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/clock.c b/arch/arm/cpu/arm_cortexa8/s5pc1xx/clock.c new file mode 100644 index 0000000000..19619f92cd --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/clock.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Heungjun Kim <riverful.kim@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/clk.h> + +#define CLK_M 0 +#define CLK_D 1 +#define CLK_P 2 + +#ifndef CONFIG_SYS_CLK_FREQ_C100 +#define CONFIG_SYS_CLK_FREQ_C100 12000000 +#endif +#ifndef CONFIG_SYS_CLK_FREQ_C110 +#define CONFIG_SYS_CLK_FREQ_C110 24000000 +#endif + +unsigned long (*get_pclk)(void); +unsigned long (*get_arm_clk)(void); +unsigned long (*get_pll_clk)(int); + +/* s5pc110: return pll clock frequency */ +static unsigned long s5pc100_get_pll_clk(int pllreg) +{ + struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE; + unsigned long r, m, p, s, mask, fout; + unsigned int freq; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con); + break; + case MPLL: + r = readl(&clk->mpll_con); + break; + case EPLL: + r = readl(&clk->epll_con); + break; + case HPLL: + r = readl(&clk->hpll_con); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + /* + * APLL_CON: MIDV [25:16] + * MPLL_CON: MIDV [23:16] + * EPLL_CON: MIDV [23:16] + * HPLL_CON: MIDV [23:16] + */ + if (pllreg == APLL) + mask = 0x3ff; + else + mask = 0x0ff; + + m = (r >> 16) & mask; + + /* PDIV [13:8] */ + p = (r >> 8) & 0x3f; + /* SDIV [2:0] */ + s = r & 0x7; + + /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */ + freq = CONFIG_SYS_CLK_FREQ_C100; + fout = m * (freq / (p * (1 << s))); + + return fout; +} + +/* s5pc100: return pll clock frequency */ +static unsigned long s5pc110_get_pll_clk(int pllreg) +{ + struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE; + unsigned long r, m, p, s, mask, fout; + unsigned int freq; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con); + break; + case MPLL: + r = readl(&clk->mpll_con); + break; + case EPLL: + r = readl(&clk->epll_con); + break; + case VPLL: + r = readl(&clk->vpll_con); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + /* + * APLL_CON: MIDV [25:16] + * MPLL_CON: MIDV [25:16] + * EPLL_CON: MIDV [24:16] + * VPLL_CON: MIDV [24:16] + */ + if (pllreg == APLL || pllreg == MPLL) + mask = 0x3ff; + else + mask = 0x1ff; + + m = (r >> 16) & mask; + + /* PDIV [13:8] */ + p = (r >> 8) & 0x3f; + /* SDIV [2:0] */ + s = r & 0x7; + + freq = CONFIG_SYS_CLK_FREQ_C110; + if (pllreg == APLL) { + if (s < 1) + s = 1; + /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */ + fout = m * (freq / (p * (1 << (s - 1)))); + } else + /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */ + fout = m * (freq / (p * (1 << s))); + + return fout; +} + +/* s5pc110: return ARM clock frequency */ +static unsigned long s5pc110_get_arm_clk(void) +{ + struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE; + unsigned long div; + unsigned long dout_apll, armclk; + unsigned int apll_ratio; + + div = readl(&clk->div0); + + /* APLL_RATIO: [2:0] */ + apll_ratio = div & 0x7; + + dout_apll = get_pll_clk(APLL) / (apll_ratio + 1); + armclk = dout_apll; + + return armclk; +} + +/* s5pc100: return ARM clock frequency */ +static unsigned long s5pc100_get_arm_clk(void) +{ + struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE; + unsigned long div; + unsigned long dout_apll, armclk; + unsigned int apll_ratio, arm_ratio; + + div = readl(&clk->div0); + + /* ARM_RATIO: [6:4] */ + arm_ratio = (div >> 4) & 0x7; + /* APLL_RATIO: [0] */ + apll_ratio = div & 0x1; + + dout_apll = get_pll_clk(APLL) / (apll_ratio + 1); + armclk = dout_apll / (arm_ratio + 1); + + return armclk; +} + +/* s5pc100: return HCLKD0 frequency */ +static unsigned long get_hclk(void) +{ + struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE; + unsigned long hclkd0; + uint div, d0_bus_ratio; + + div = readl(&clk->div0); + /* D0_BUS_RATIO: [10:8] */ + d0_bus_ratio = (div >> 8) & 0x7; + + hclkd0 = get_arm_clk() / (d0_bus_ratio + 1); + + return hclkd0; +} + +/* s5pc100: return PCLKD1 frequency */ +static unsigned long get_pclkd1(void) +{ + struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE; + unsigned long d1_bus, pclkd1; + uint div, d1_bus_ratio, pclkd1_ratio; + + div = readl(&clk->div0); + /* D1_BUS_RATIO: [14:12] */ + d1_bus_ratio = (div >> 12) & 0x7; + /* PCLKD1_RATIO: [18:16] */ + pclkd1_ratio = (div >> 16) & 0x7; + + /* ASYNC Mode */ + d1_bus = get_pll_clk(MPLL) / (d1_bus_ratio + 1); + pclkd1 = d1_bus / (pclkd1_ratio + 1); + + return pclkd1; +} + +/* s5pc110: return HCLKs frequency */ +static unsigned long get_hclk_sys(int dom) +{ + struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE; + unsigned long hclk; + unsigned int div; + unsigned int offset; + unsigned int hclk_sys_ratio; + + if (dom == CLK_M) + return get_hclk(); + + div = readl(&clk->div0); + + /* + * HCLK_MSYS_RATIO: [10:8] + * HCLK_DSYS_RATIO: [19:16] + * HCLK_PSYS_RATIO: [27:24] + */ + offset = 8 + (dom << 0x3); + + hclk_sys_ratio = (div >> offset) & 0xf; + + hclk = get_pll_clk(MPLL) / (hclk_sys_ratio + 1); + + return hclk; +} + +/* s5pc110: return PCLKs frequency */ +static unsigned long get_pclk_sys(int dom) +{ + struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE; + unsigned long pclk; + unsigned int div; + unsigned int offset; + unsigned int pclk_sys_ratio; + + div = readl(&clk->div0); + + /* + * PCLK_MSYS_RATIO: [14:12] + * PCLK_DSYS_RATIO: [22:20] + * PCLK_PSYS_RATIO: [30:28] + */ + offset = 12 + (dom << 0x3); + + pclk_sys_ratio = (div >> offset) & 0x7; + + pclk = get_hclk_sys(dom) / (pclk_sys_ratio + 1); + + return pclk; +} + +/* s5pc110: return peripheral clock frequency */ +static unsigned long s5pc110_get_pclk(void) +{ + return get_pclk_sys(CLK_P); +} + +/* s5pc100: return peripheral clock frequency */ +static unsigned long s5pc100_get_pclk(void) +{ + return get_pclkd1(); +} + +void s5pc1xx_clock_init(void) +{ + if (cpu_is_s5pc110()) { + get_pll_clk = s5pc110_get_pll_clk; + get_arm_clk = s5pc110_get_arm_clk; + get_pclk = s5pc110_get_pclk; + } else { + get_pll_clk = s5pc100_get_pll_clk; + get_arm_clk = s5pc100_get_arm_clk; + get_pclk = s5pc100_get_pclk; + } +} diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cpu_info.c b/arch/arm/cpu/arm_cortexa8/s5pc1xx/cpu_info.c new file mode 100644 index 0000000000..f16c0ff130 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/cpu_info.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clk.h> + +/* Default is s5pc100 */ +unsigned int s5pc1xx_cpu_id = 0xC100; + +#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{ + s5pc1xx_cpu_id = readl(S5PC1XX_PRO_ID); + s5pc1xx_cpu_id = 0xC000 | ((s5pc1xx_cpu_id & 0x00FFF000) >> 12); + + s5pc1xx_clock_init(); + + return 0; +} +#endif + +u32 get_device_type(void) +{ + return s5pc1xx_cpu_id; +} + +#ifdef CONFIG_DISPLAY_CPUINFO +int print_cpuinfo(void) +{ + char buf[32]; + + printf("CPU:\tS5P%X@%sMHz\n", + s5pc1xx_cpu_id, strmhz(buf, get_arm_clk())); + + return 0; +} +#endif diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c b/arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c new file mode 100644 index 0000000000..a97244bf30 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c @@ -0,0 +1,143 @@ +/* + * (C) Copyright 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> + +#define CON_MASK(x) (0xf << ((x) << 2)) +#define CON_SFR(x, v) ((v) << ((x) << 2)) + +#define DAT_MASK(x) (0x1 << (x)) +#define DAT_SET(x) (0x1 << (x)) + +#define PULL_MASK(x) (0x3 << ((x) << 1)) +#define PULL_MODE(x, v) ((v) << ((x) << 1)) + +#define DRV_MASK(x) (0x3 << ((x) << 1)) +#define DRV_SET(x, m) ((m) << ((x) << 1)) +#define RATE_MASK(x) (0x1 << (x + 16)) +#define RATE_SET(x) (0x1 << (x + 16)) + +void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg) +{ + unsigned int value; + + value = readl(&bank->con); + value &= ~CON_MASK(gpio); + value |= CON_SFR(gpio, cfg); + writel(value, &bank->con); +} + +void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en) +{ + unsigned int value; + + gpio_cfg_pin(bank, gpio, GPIO_OUTPUT); + + value = readl(&bank->dat); + value &= ~DAT_MASK(gpio); + if (en) + value |= DAT_SET(gpio); + writel(value, &bank->dat); +} + +void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio) +{ + gpio_cfg_pin(bank, gpio, GPIO_INPUT); +} + +void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en) +{ + unsigned int value; + + value = readl(&bank->dat); + value &= ~DAT_MASK(gpio); + if (en) + value |= DAT_SET(gpio); + writel(value, &bank->dat); +} + +unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio) +{ + unsigned int value; + + value = readl(&bank->dat); + return !!(value & DAT_MASK(gpio)); +} + +void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +{ + unsigned int value; + + value = readl(&bank->pull); + value &= ~PULL_MASK(gpio); + + switch (mode) { + case GPIO_PULL_DOWN: + case GPIO_PULL_UP: + value |= PULL_MODE(gpio, mode); + break; + default: + return; + } + + writel(value, &bank->pull); +} + +void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +{ + unsigned int value; + + value = readl(&bank->drv); + value &= ~DRV_MASK(gpio); + + switch (mode) { + case GPIO_DRV_1X: + case GPIO_DRV_2X: + case GPIO_DRV_3X: + case GPIO_DRV_4X: + value |= DRV_SET(gpio, mode); + break; + default: + return; + } + + writel(value, &bank->drv); +} + +void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +{ + unsigned int value; + + value = readl(&bank->drv); + value &= ~RATE_MASK(gpio); + + switch (mode) { + case GPIO_DRV_FAST: + case GPIO_DRV_SLOW: + value |= RATE_SET(gpio); + break; + default: + return; + } + + writel(value, &bank->drv); +} diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/reset.S b/arch/arm/cpu/arm_cortexa8/s5pc1xx/reset.S new file mode 100644 index 0000000000..7f6ff9c35f --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/reset.S @@ -0,0 +1,47 @@ +/* + * Copyright (c) 2009 Samsung Electronics. + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/cpu.h> + +#define S5PC100_SWRESET 0xE0200000 +#define S5PC110_SWRESET 0xE0102000 + +.globl reset_cpu +reset_cpu: + ldr r1, =S5PC1XX_PRO_ID + ldr r2, [r1] + ldr r4, =0x00010000 + and r4, r2, r4 + cmp r4, #0 + bne 110f + /* S5PC100 */ + ldr r1, =S5PC100_SWRESET + ldr r2, =0xC100 + b 200f +110: /* S5PC110 */ + ldr r1, =S5PC110_SWRESET + mov r2, #1 +200: + str r2, [r1] +_loop_forever: + b _loop_forever diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/sromc.c b/arch/arm/cpu/arm_cortexa8/s5pc1xx/sromc.c new file mode 100644 index 0000000000..380be81be5 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/sromc.c @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Naveen Krishna Ch <ch.naveen@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/smc.h> + +/* + * s5pc1xx_config_sromc() - select the proper SROMC Bank and configure the + * band width control and bank control registers + * srom_bank - SROM Bank 0 to 5 + * smc_bw_conf - SMC Band witdh reg configuration value + * smc_bc_conf - SMC Bank Control reg configuration value + */ +void s5pc1xx_config_sromc(u32 srom_bank, u32 smc_bw_conf, u32 smc_bc_conf) +{ + u32 tmp; + struct s5pc1xx_smc *srom; + + if (cpu_is_s5pc100()) + srom = (struct s5pc1xx_smc *)S5PC100_SROMC_BASE; + else + srom = (struct s5pc1xx_smc *)S5PC110_SROMC_BASE; + + /* Configure SMC_BW register to handle proper SROMC bank */ + tmp = srom->bw; + tmp &= ~(0xF << (srom_bank * 4)); + tmp |= smc_bw_conf; + srom->bw = tmp; + + /* Configure SMC_BC register */ + srom->bc[srom_bank] = smc_bc_conf; +} diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/timer.c b/arch/arm/cpu/arm_cortexa8/s5pc1xx/timer.c new file mode 100644 index 0000000000..c5df5c5ab5 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/timer.c @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Heungjun Kim <riverful.kim@samsung.com> + * Inki Dae <inki.dae@samsung.com> + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/pwm.h> +#include <asm/arch/clk.h> + +#define PRESCALER_1 (16 - 1) /* prescaler of timer 2, 3, 4 */ +#define MUX_DIV_2 1 /* 1/2 period */ +#define MUX_DIV_4 2 /* 1/4 period */ +#define MUX_DIV_8 3 /* 1/8 period */ +#define MUX_DIV_16 4 /* 1/16 period */ +#define MUX4_DIV_SHIFT 16 + +#define TCON_TIMER4_SHIFT 20 + +static unsigned long count_value; + +/* Internal tick units */ +static unsigned long long timestamp; /* Monotonic incrementing timer */ +static unsigned long lastdec; /* Last decremneter snapshot */ + +/* macro to read the 16 bit timer */ +static inline struct s5pc1xx_timer *s5pc1xx_get_base_timer(void) +{ + if (cpu_is_s5pc110()) + return (struct s5pc1xx_timer *)S5PC110_TIMER_BASE; + else + return (struct s5pc1xx_timer *)S5PC100_TIMER_BASE; +} + +int timer_init(void) +{ + struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer(); + u32 val; + + /* + * @ PWM Timer 4 + * Timer Freq(HZ) = + * PCLK / { (prescaler_value + 1) * (divider_value) } + */ + + /* set prescaler : 16 */ + /* set divider : 2 */ + writel((PRESCALER_1 & 0xff) << 8, &timer->tcfg0); + writel((MUX_DIV_2 & 0xf) << MUX4_DIV_SHIFT, &timer->tcfg1); + + if (count_value == 0) { + /* reset initial value */ + /* count_value = 2085937.5(HZ) (per 1 sec)*/ + count_value = get_pclk() / ((PRESCALER_1 + 1) * + (MUX_DIV_2 + 1)); + + /* count_value / 100 = 20859.375(HZ) (per 10 msec) */ + count_value = count_value / 100; + } + + /* set count value */ + writel(count_value, &timer->tcntb4); + lastdec = count_value; + + val = (readl(&timer->tcon) & ~(0x07 << TCON_TIMER4_SHIFT)) | + S5PC1XX_TCON4_AUTO_RELOAD; + + /* auto reload & manual update */ + writel(val | S5PC1XX_TCON4_UPDATE, &timer->tcon); + + /* start PWM timer 4 */ + writel(val | S5PC1XX_TCON4_START, &timer->tcon); + + timestamp = 0; + + return 0; +} + +/* + * timer without interrupts + */ +void reset_timer(void) +{ + reset_timer_masked(); +} + +unsigned long get_timer(unsigned long base) +{ + return get_timer_masked() - base; +} + +void set_timer(unsigned long t) +{ + timestamp = t; +} + +/* delay x useconds */ +void __udelay(unsigned long usec) +{ + unsigned long tmo, tmp; + + if (usec >= 1000) { + /* + * if "big" number, spread normalization + * to seconds + * 1. start to normalize for usec to ticks per sec + * 2. find number of "ticks" to wait to achieve target + * 3. finish normalize. + */ + tmo = usec / 1000; + tmo *= (CONFIG_SYS_HZ * count_value / 10); + tmo /= 1000; + } else { + /* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CONFIG_SYS_HZ * count_value / 10; + tmo /= (1000 * 1000); + } + + /* get current timestamp */ + tmp = get_timer(0); + + /* if setting this fordward will roll time stamp */ + /* reset "advancing" timestamp to 0, set lastdec value */ + /* else, set advancing stamp wake up time */ + if ((tmo + tmp + 1) < tmp) + reset_timer_masked(); + else + tmo += tmp; + + /* loop till event */ + while (get_timer_masked() < tmo) + ; /* nop */ +} + +void reset_timer_masked(void) +{ + struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer(); + + /* reset time */ + lastdec = readl(&timer->tcnto4); + timestamp = 0; +} + +unsigned long get_timer_masked(void) +{ + struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer(); + unsigned long now = readl(&timer->tcnto4); + + if (lastdec >= now) + timestamp += lastdec - now; + else + timestamp += lastdec + count_value - now; + + lastdec = now; + + return timestamp; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +unsigned long get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/cpu/arm_cortexa8/start.S b/arch/arm/cpu/arm_cortexa8/start.S new file mode 100644 index 0000000000..29dae2f282 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/start.S @@ -0,0 +1,416 @@ +/* + * armboot - Startup Code for OMAP3530/ARM Cortex CPU-core + * + * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com> + * + * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> + * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> + * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> + * Copyright (c) 2003 Kshitij <kshitij@ti.com> + * Copyright (c) 2006-2008 Syed Mohammed Khasim <x0khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +.globl _start +_start: b reset + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +_undefined_instruction: .word undefined_instruction +_software_interrupt: .word software_interrupt +_prefetch_abort: .word prefetch_abort +_data_abort: .word data_abort +_not_used: .word not_used +_irq: .word irq +_fiq: .word fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +.global _end_vect +_end_vect: + + .balignl 16,0xdeadbeef +/************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + *************************************************************************/ + +_TEXT_BASE: + .word TEXT_BASE + +.globl _armboot_start +_armboot_start: + .word _start + +/* + * These are defined in the board-specific linker script. + */ +.globl _bss_start +_bss_start: + .word __bss_start + +.globl _bss_end +_bss_end: + .word _end + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0, cpsr + bic r0, r0, #0x1f + orr r0, r0, #0xd3 + msr cpsr,r0 + +#if (CONFIG_OMAP34XX) + /* Copy vectors to mask ROM indirect addr */ + adr r0, _start @ r0 <- current position of code + add r0, r0, #4 @ skip reset vector + mov r2, #64 @ r2 <- size to copy + add r2, r0, r2 @ r2 <- source end address + mov r1, #SRAM_OFFSET0 @ build vect addr + mov r3, #SRAM_OFFSET1 + add r1, r1, r3 + mov r3, #SRAM_OFFSET2 + add r1, r1, r3 +next: + ldmia r0!, {r3 - r10} @ copy from source address [r0] + stmia r1!, {r3 - r10} @ copy to target address [r1] + cmp r0, r2 @ until source end address [r2] + bne next @ loop until equal */ +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) + /* No need to copy/exec the clock code - DPLL adjust already done + * in NAND/oneNAND Boot. + */ + bl cpy_clk_code @ put dpll adjust code behind vectors +#endif /* NAND Boot */ +#endif + /* the mask ROM code should have PLL and others stable */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + bl cpu_init_crit +#endif + +#ifndef CONFIG_SKIP_RELOCATE_UBOOT +relocate: @ relocate U-Boot to RAM + adr r0, _start @ r0 <- current position of code + ldr r1, _TEXT_BASE @ test if we run from flash or RAM + cmp r0, r1 @ don't reloc during debug + beq stack_setup + + ldr r2, _armboot_start + ldr r3, _bss_start + sub r2, r3, r2 @ r2 <- size of armboot + add r2, r0, r2 @ r2 <- source end address + +copy_loop: @ copy 32 bytes at a time + ldmia r0!, {r3 - r10} @ copy from source address [r0] + stmia r1!, {r3 - r10} @ copy to target address [r1] + cmp r0, r2 @ until source end addreee [r2] + ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ + + /* Set up the stack */ +stack_setup: + ldr r0, _TEXT_BASE @ upper 128 KiB: relocated uboot + sub r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area + sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE @ bdinfo +#ifdef CONFIG_USE_IRQ + sub r0, r0, #(CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ) +#endif + sub sp, r0, #12 @ leave 3 words for abort-stack + and sp, sp, #~7 @ 8 byte alinged for (ldr/str)d + + /* Clear BSS (if any). Is below tx (watch load addr - need space) */ +clear_bss: + ldr r0, _bss_start @ find start of bss segment + ldr r1, _bss_end @ stop here + mov r2, #0x00000000 @ clear value +clbss_l: + str r2, [r0] @ clear BSS location + cmp r0, r1 @ are we at the end yet + add r0, r0, #4 @ increment clear index pointer + bne clbss_l @ keep clearing till at end + + ldr pc, _start_armboot @ jump to C code + +_start_armboot: .word start_armboot + + +/************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + *************************************************************************/ +cpu_init_crit: + /* + * Invalidate L1 I/D + */ + mov r0, #0 @ set up for MCR + mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r0, c7, c5, 0 @ invalidate icache + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002000 @ clear bits 13 (--V-) + bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM) + orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align + orr r0, r0, #0x00000800 @ set bit 12 (Z---) BTB + mcr p15, 0, r0, c1, c0, 0 + + /* + * Jump to board specific initialization... + * The Mask ROM will have already initialized + * basic memory. Go here to bump up clock rate and handle + * wake up conditions. + */ + mov ip, lr @ persevere link reg across call + bl lowlevel_init @ go setup pll,mux,memory + mov lr, ip @ restore link + mov pc, lr @ back to my caller +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling + */ + + .macro bad_save_user_regs + sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current + @ user stack + stmia sp, {r0 - r12} @ Save user registers (now in + @ svc mode) r0-r12 + + ldr r2, _armboot_start + sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) + sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ set base 2 words into abort + @ stack + ldmia r2, {r2 - r3} @ get values for "aborted" pc + @ and cpsr (into parm regs) + add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack + + add r5, sp, #S_SP + mov r1, lr + stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr + mov r0, sp @ save current stack into r0 + @ (param register) + .endm + + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + add r8, sp, #S_PC @ !! R8 NEEDS to be saved !! + @ a reserved stack spot would + @ be good. + stmdb r8, {sp, lr}^ @ Calling SP, LR + str lr, [r8, #0] @ Save calling PC + mrs r6, spsr + str r6, [r8, #4] @ Save CPSR + str r0, [r8, #8] @ Save OLD_R0 + mov r0, sp + .endm + + .macro irq_restore_user_regs + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + subs pc, lr, #4 @ return & move spsr_svc into + @ cpsr + .endm + + .macro get_bad_stack + ldr r13, _armboot_start @ setup our mode stack (enter + @ in banked mode) + sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool + sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move to reserved a couple + @ spots for abort stack + + str lr, [r13] @ save caller lr in position 0 + @ of saved stack + mrs lr, spsr @ get the spsr + str lr, [r13, #4] @ save spsr in position 1 of + @ saved stack + + mov r13, #MODE_SVC @ prepare SVC-Mode + @ msr spsr_c, r13 + msr spsr, r13 @ switch modes, make sure + @ moves will execute + mov lr, pc @ capture return pc + movs pc, lr @ jump to next instruction & + @ switch modes. + .endm + + .macro get_bad_stack_swi + sub r13, r13, #4 @ space on current stack for + @ scratch reg. + str r0, [r13] @ save R0's value. + ldr r0, _armboot_start @ get data regions start + sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool + sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move past gbl and a couple + @ spots for abort stack + str lr, [r0] @ save caller lr in position 0 + @ of saved stack + mrs r0, spsr @ get the spsr + str lr, [r0, #4] @ save spsr in position 1 of + @ saved stack + ldr r0, [r13] @ restore r0 + add r13, r13, #4 @ pop stack entry + .endm + + .macro get_irq_stack @ setup IRQ stack + ldr sp, IRQ_STACK_START + .endm + + .macro get_fiq_stack @ setup FIQ stack + ldr sp, FIQ_STACK_START + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack_swi + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + +#ifdef CONFIG_USE_IRQ + + .align 5 +irq: + get_irq_stack + irq_save_user_regs + bl do_irq + irq_restore_user_regs + + .align 5 +fiq: + get_fiq_stack + /* someone ought to write a more effective fiq_save_user_regs */ + irq_save_user_regs + bl do_fiq + irq_restore_user_regs + +#else + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq + +#endif diff --git a/arch/arm/cpu/arm_cortexa8/u-boot.lds b/arch/arm/cpu/arm_cortexa8/u-boot.lds new file mode 100644 index 0000000000..820e3a1043 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/u-boot.lds @@ -0,0 +1,58 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + arch/arm/cpu/arm_cortexa8/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} |
