diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 167 |
1 files changed, 167 insertions, 0 deletions
@@ -2,6 +2,173 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Several improvements to the new NAND subsystem: + - JFFS2 related commands implemented in mtd-utils style + - Support for bad blocks + - Bad block testing commands + - NAND lock commands + Please take a look at doc/README.nand for more details + Patch by Guido Classen, 10 Oct 2006 + +* Define IH_CPU_AVR32 + Make it possible to generate AVR32 uImage files with mkimage and + make cmd_bootm recognize them. + Patch by Haavard Skinnemoen, 22 Sep 2006 + +* Fix buffer overflow problem in ft_build.c + Patch by Fredrik Roubert, 09 Oct 2006 + +* Make bootp implementation RFC3046 compliant + Patch by Joakim Larsson, 27 Jun 2006 + +* TQM5200: perform POST memory test only on STK52xx carrier board. + (and then only if PSC6_3 is read as "1" when booting). + Patch by Martin Krause, 21 Jun 2006 + +* Move "ar" flags to config.mk to allow for silent "make -s" + Based on patch by Mike Frysinger, 20 Jun 2006 + +* Coding style cleanup + +* Add support for EP82xxM boards + Patch by Aaron Sells, 20 Jun 2006 + +* Fix comments in include/ppc440.h + Patch by Martin Hicks, 16 Jun 2006 + +* Update for CAM5200 board: + - Map in a additional chip selects CS4 and CS5. + - Modify the port configration, configure six UARTs and no PCI, + ATA and USB. + - Add custom flash driver to handle specific byte swapping + +* Fix TLB setup for Ocotea board + Patch by Stefan Roese, 30 Sep 2006 + +* Fix reset problem in sequoia sdram init code + Patch by Stefan Roese, 23 Sep 2006 + +* Disable autoboot abort for FO300 when silent mode is enabled + (according to S1 switch setting). + +* Cleanup examples binaries + +* Add support for AMCC Rainier PPX440GRx eval board + Patch by Stefan Roese, 13 Sep 2006 + +* Add NAND environment support for PPC440EPx Sequoia NAND boot config + Patch by Stefan Roese, 12 Sep 2006 + +* Update NAND boot documentation + Patch by Stefan Roese, 12 Sep 2006 + +* Fix alignment problem in "mtdparts" command + +* Add documentation on the latest build environment extensions to + the README file. + +* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory. + +* Fix LOG_DIR directory creation error. + Add support for automatic creation of BUILD_DIR directory. + +* Fix build problem cpu/ppc4xx/ndfc.c + Patch by Stefan Roese, 07 Sep 2006 + +* Fix build problem with CPCI440 + Patch by Stefan Roese, 07 Sep 2006 + +* Change Yellowstone to use CFI write buffer + Patch by Stefan Roese, 07 Sep 2006 + +* Add support for AMCC Sequoia PPC440EPx eval board + - Add support for PPC440EPx & PPC440GRx + - Add support for PPC440EP(x)/GR(x) NAND controller + in cpu/ppc4xx directory + - Add NAND boot functionality for Sequoia board, + please see doc/README.nand-boot-ppc440 for details + - This Sequoia NAND image doesn't support environment + in NAND for now. This will be added in a short while. + Patch by Stefan Roese, 07 Sep 2006 + +* Fix mkimage -l bug with multifile images on 64bit platforms + Patch by David Updegraff, 06 Sep 2006 + +* Fix build problems on sorcery board. + +* Fix coldfire build problems. + Patch by Marian Balakowicz, 01 Sep 2006 + +* Add support for a saving build objects in a separate directory. + Modifications are based on the Linux kernel approach and support + two use cases: + 1) Add O= to the make command line 'make O=/tmp/build all' + 2) Set environement variable BUILD_DIR to point to the desired location + 'export BUILD_DIR=/tmp/build' + 'make' + The second approach can also be used with a MAKEALL script + 'export BUILD_DIR=/tmp/build' + './MAKEALL' + Command line 'O=' setting overrides the BUILD_DIR environent variable. + When none of the above methods is used the local build is performed + and the object files are placed in the source directory. + +* Remove the board/netstar/crcit binary from git repository. + +* Fix tools/updater build error. + +* Fix tools/easylogo build error. + +* Fixed problems on PRS200 board caused by adding splash screen on MCC200 + +* Extended README entry on coding style + +* Added another example showing simple interrupt interception. + +* Added simple_strtoul(), getenv() and setenv() to the exported functions. + Also bumped up ABI version to reflect this change. + +* Added interrupt handling capabilities for mpc5xxx processors. + Also added Linux like BUG() macros. + +* Coding Style cleanup. + Patch by Stefano Babic, 31 Aug 2006 + +* Add splashscreen support for MCC200 board. + +* Make the serial driver framework work with CONFIG_SERIAL_MULTI + enabled + +* PCIe endpoint support for AMCC Yucca 440SPe board + Patch by Tirumala R Marri, 26 Aug 2006 + +* Improve DIMM detection for AMCC Yucca 440SPe board + Improved the memory DIMM detection for the Yucca 440SPe board for + the case where a memory DIMM is falsely detected as present. + This issue is seen on some AMCC Yucca 440SPe validation boards if + only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is + populated and DIMM slot 1 is empty. In this case, U-Boot does + not correctly detect that there is only one DIMM memory module + installed and will falsely detect two DIMM memory modules are + present and therefore U-Boot will not calculate the correct amount + of total memory and u-boot will not booting up. + Patch by Adam Graham, 24 Aug 2006 + +* Fix typo. + +* Code cleanup + +* Update for MCC200 / PRS200 boards: + - auto-adjust console device for Linux. + - fix typos. + +* Add a fix for a buggy USB device on the FO300 board. + +* Updates for MCC200 / PRS200 boards: + - support for configurations with SDRAM or DDR memory, + - support for highboot and lowboot + - adjusting environment definitions + * Add support for WTK FO300 board (TQM5200 based). * Fix TQM834x hang. |
