summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG3
-rw-r--r--common/Makefile2
-rw-r--r--common/altera.c19
-rw-r--r--common/cmd_fpga.c21
-rw-r--r--common/cyclon2.c305
-rw-r--r--include/ACEX1K.h19
-rw-r--r--include/altera.h4
7 files changed, 372 insertions, 1 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 24499c5621..43b8678745 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
Changes since U-Boot 1.1.4:
======================================================================
+* Add FPGA Altera Cyclone 2 support
+ Patch by Heiko Schocher, 15 Aug 2006
+
* Fix control-c handing in CONFIG_CMDLINE_EDITING
Properly pass break code back from readline.
Patch by Roger Blofeld, 31 Jul 2006
diff --git a/common/Makefile b/common/Makefile
index eb0b5dadfe..7e446ec6f6 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -41,7 +41,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \
cmd_pci.o cmd_pcmcia.o cmd_portio.o \
cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \
cmd_usb.o cmd_vfd.o \
- command.o console.o devices.o dlmalloc.o docecc.o \
+ command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
environment.o env_common.o \
env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
env_nvram.o env_nowhere.o \
diff --git a/common/altera.c b/common/altera.c
index ebd50382c6..357d70234c 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -55,10 +55,15 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize )
} else {
switch (desc->family) {
case Altera_ACEX1K:
+ case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
+#elif (CONFIG_FPGA & CFG_CYCLON2)
+ PRINTF ("%s: Launching the CYCLON II Loader...\n",
+ __FUNCTION__);
+ ret_val = CYC2_load (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
@@ -113,6 +118,9 @@ int altera_info( Altera_desc *desc )
printf ("ACEX1K\n");
break;
/* Add new family types here */
+ case Altera_CYC2:
+ printf ("CYCLON II\n");
+ break;
default:
printf ("Unknown family type, %d\n", desc->family);
}
@@ -147,8 +155,11 @@ int altera_info( Altera_desc *desc )
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Altera_ACEX1K:
+ case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
ACEX1K_info (desc);
+#elif (CONFIG_FPGA & CFG_CYCLON2)
+ CYC2_info (desc);
#else
/* just in case */
printf ("%s: No support for ACEX1K devices.\n",
@@ -188,6 +199,14 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
__FUNCTION__);
#endif
break;
+ case Altera_CYC2:
+#if (CONFIG_FPGA & CFG_CYCLON2)
+ ret_val = CYC2_reloc (desc, reloc_offset);
+#else
+ printf ("%s: No support for CYCLON II devices.\n",
+ __FUNCTION__);
+#endif
+ break;
/* Add new family types here */
default:
printf ("%s: Unsupported family type, %d\n",
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 9a01e7df8b..df859bd987 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -55,6 +55,7 @@ static int fpga_get_op (char *opstr);
#define FPGA_LOAD 1
#define FPGA_LOADB 2
#define FPGA_DUMP 3
+#define FPGA_LOADMK 4
/* Convert bitstream data and load into the fpga */
int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
@@ -251,6 +252,23 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
rc = fpga_loadbitstream(dev, fpga_data, data_size);
break;
+ case FPGA_LOADMK:
+ {
+ image_header_t header;
+ image_header_t *hdr = &header;
+ ulong data;
+
+ memmove (&header, (char *)fpga_data, sizeof(image_header_t));
+ if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+ puts ("Bad Magic Number\n");
+ return 1;
+ }
+ data = (char *)(fpga_data + sizeof(image_header_t));
+ data_size = ntohl(hdr->ih_size);
+ rc = fpga_load (dev, data, data_size);
+ }
+ break;
+
case FPGA_DUMP:
rc = fpga_dump (dev, fpga_data, data_size);
break;
@@ -282,6 +300,8 @@ static int fpga_get_op (char *opstr)
op = FPGA_LOADB;
} else if (!strcmp ("load", opstr)) {
op = FPGA_LOAD;
+ } else if (!strcmp ("loadmk", opstr)) {
+ op = FPGA_LOADMK;
} else if (!strcmp ("dump", opstr)) {
op = FPGA_DUMP;
}
@@ -299,5 +319,6 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
"\tinfo\tlist known device information\n"
"\tload\tLoad device from memory buffer\n"
"\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
+ "\tloadmk\tLoad device generated with mkimage\n"
"\tdump\tLoad device to memory buffer\n");
#endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */
diff --git a/common/cyclon2.c b/common/cyclon2.c
new file mode 100644
index 0000000000..dce13b50d0
--- /dev/null
+++ b/common/cyclon2.c
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, hs@denx.de
+ * Based on ACE1XK.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h> /* core U-Boot definitions */
+#include <altera.h>
+#include <ACEX1K.h> /* ACEX device family */
+
+#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
+
+/* Define FPGA_DEBUG to get debug printf's */
+#ifdef FPGA_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+/* Note: The assumption is that we cannot possibly run fast enough to
+ * overrun the device (the Slave Parallel mode can free run at 50MHz).
+ * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
+ * the board config file to slow things down.
+ */
+#ifndef CONFIG_FPGA_DELAY
+#define CONFIG_FPGA_DELAY()
+#endif
+
+#ifndef CFG_FPGA_WAIT
+#define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */
+#endif
+
+static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
+static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
+/* static int CYC2_ps_info( Altera_desc *desc ); */
+static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
+
+/* ------------------------------------------------------------------------- */
+/* CYCLON2 Generic Implementation */
+int CYC2_load (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL;
+
+ switch (desc->iface) {
+ case passive_serial:
+ PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
+ ret_val = CYC2_ps_load (desc, buf, bsize);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL;
+
+ switch (desc->iface) {
+ case passive_serial:
+ PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
+ ret_val = CYC2_ps_dump (desc, buf, bsize);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+int CYC2_info( Altera_desc *desc )
+{
+ return FPGA_SUCCESS;
+}
+
+int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
+{
+ int ret_val = FPGA_FAIL; /* assume a failure */
+
+ if (desc->family != Altera_CYC2) {
+ printf ("%s: Unsupported family type, %d\n",
+ __FUNCTION__, desc->family);
+ return FPGA_FAIL;
+ } else
+ switch (desc->iface) {
+ case passive_serial:
+ ret_val = CYC2_ps_reloc (desc, reloc_offset);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+/* ------------------------------------------------------------------------- */
+/* CYCLON2 Passive Serial Generic Implementation */
+static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL; /* assume the worst */
+ Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
+ int ret = 0;
+
+ PRINTF ("%s: start with interface functions @ 0x%p\n",
+ __FUNCTION__, fn);
+
+ if (fn) {
+ int cookie = desc->cookie; /* make a local copy */
+ unsigned long ts; /* timestamp */
+
+ PRINTF ("%s: Function Table:\n"
+ "ptr:\t0x%p\n"
+ "struct: 0x%p\n"
+ "config:\t0x%p\n"
+ "status:\t0x%p\n"
+ "write:\t0x%p\n"
+ "done:\t0x%p\n\n",
+ __FUNCTION__, &fn, fn, fn->config, fn->status,
+ fn->write, fn->done);
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ printf ("Loading FPGA Device %d...", cookie);
+#endif
+
+ /*
+ * Run the pre configuration function if there is one.
+ */
+ if (*fn->pre) {
+ (*fn->pre) (cookie);
+ }
+
+ /* Establish the initial state */
+ (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
+
+ udelay(2); /* T_cfg > 2us */
+
+ /* Wait for nSTATUS to be asserted */
+ ts = get_timer (0); /* get current time */
+ do {
+ CONFIG_FPGA_DELAY ();
+ if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ puts ("** Timeout waiting for STATUS to go high.\n");
+ (*fn->abort) (cookie);
+ return FPGA_FAIL;
+ }
+ } while (!(*fn->status) (cookie));
+
+ /* Get ready for the burn */
+ CONFIG_FPGA_DELAY ();
+
+ ret = (*fn->write) (buf, bsize, TRUE, cookie);
+ if (ret) {
+ puts ("** Write failed.\n");
+ (*fn->abort) (cookie);
+ return FPGA_FAIL;
+ }
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ puts(" OK? ...");
+#endif
+
+ CONFIG_FPGA_DELAY ();
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ putc (' '); /* terminate the dotted line */
+#endif
+
+ /*
+ * Checking FPGA's CONF_DONE signal - correctly booted ?
+ */
+
+ if ( ! (*fn->done) (cookie) ) {
+ puts ("** Booting failed! CONF_DONE is still deasserted.\n");
+ (*fn->abort) (cookie);
+ return (FPGA_FAIL);
+ }
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ puts(" OK\n");
+#endif
+
+ ret_val = FPGA_SUCCESS;
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ if (ret_val == FPGA_SUCCESS) {
+ puts ("Done.\n");
+ }
+ else {
+ puts ("Fail.\n");
+ }
+#endif
+ (*fn->post) (cookie);
+
+ } else {
+ printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+ }
+
+ return ret_val;
+}
+
+static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
+{
+ /* Readback is only available through the Slave Parallel and */
+ /* boundary-scan interfaces. */
+ printf ("%s: Passive Serial Dumping is unavailable\n",
+ __FUNCTION__);
+ return FPGA_FAIL;
+}
+
+static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
+{
+ int ret_val = FPGA_FAIL; /* assume the worst */
+ Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
+ (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
+
+ if (fn) {
+ ulong addr;
+
+ /* Get the relocated table address */
+ addr = (ulong) fn + reloc_offset;
+ fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
+
+ if (!fn_r->relocated) {
+
+ if (memcmp (fn_r, fn,
+ sizeof (Altera_CYC2_Passive_Serial_fns))
+ == 0) {
+ /* good copy of the table, fix the descriptor pointer */
+ desc->iface_fns = fn_r;
+ } else {
+ PRINTF ("%s: Invalid function table at 0x%p\n",
+ __FUNCTION__, fn_r);
+ return FPGA_FAIL;
+ }
+
+ PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
+ desc);
+
+ addr = (ulong) (fn->pre) + reloc_offset;
+ fn_r->pre = (Altera_pre_fn) addr;
+
+ addr = (ulong) (fn->config) + reloc_offset;
+ fn_r->config = (Altera_config_fn) addr;
+
+ addr = (ulong) (fn->status) + reloc_offset;
+ fn_r->status = (Altera_status_fn) addr;
+
+ addr = (ulong) (fn->done) + reloc_offset;
+ fn_r->done = (Altera_done_fn) addr;
+
+ addr = (ulong) (fn->write) + reloc_offset;
+ fn_r->write = (Altera_write_fn) addr;
+
+ addr = (ulong) (fn->abort) + reloc_offset;
+ fn_r->abort = (Altera_abort_fn) addr;
+
+ addr = (ulong) (fn->post) + reloc_offset;
+ fn_r->post = (Altera_post_fn) addr;
+
+ fn_r->relocated = TRUE;
+
+ } else {
+ /* this table has already been moved */
+ /* XXX - should check to see if the descriptor is correct */
+ desc->iface_fns = fn_r;
+ }
+
+ ret_val = FPGA_SUCCESS;
+ } else {
+ printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+ }
+
+ return ret_val;
+}
+
+#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */
diff --git a/include/ACEX1K.h b/include/ACEX1K.h
index f75c463f33..f249d6402d 100644
--- a/include/ACEX1K.h
+++ b/include/ACEX1K.h
@@ -35,6 +35,11 @@ extern int ACEX1K_dump( Altera_desc *desc, void *buf, size_t bsize );
extern int ACEX1K_info( Altera_desc *desc );
extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off );
+extern int CYC2_load( Altera_desc *desc, void *image, size_t size );
+extern int CYC2_dump( Altera_desc *desc, void *buf, size_t bsize );
+extern int CYC2_info( Altera_desc *desc );
+extern int CYC2_reloc( Altera_desc *desc, ulong reloc_off );
+
/* Slave Serial Implementation function table */
typedef struct {
Altera_pre_fn pre;
@@ -48,6 +53,18 @@ typedef struct {
int relocated;
} Altera_ACEX1K_Passive_Serial_fns;
+/* Slave Serial Implementation function table */
+typedef struct {
+ Altera_pre_fn pre;
+ Altera_config_fn config;
+ Altera_status_fn status;
+ Altera_done_fn done;
+ Altera_write_fn write;
+ Altera_abort_fn abort;
+ Altera_post_fn post;
+ int relocated;
+} Altera_CYC2_Passive_Serial_fns;
+
/* Device Image Sizes
*********************************************************************/
/* ACEX1K */
@@ -60,6 +77,8 @@ typedef struct {
#endif
#define Altera_EP1K100_SIZE (166965*8)
+#define Altera_EP2C35_SIZE 883905
+
/* Descriptor Macros
*********************************************************************/
/* ACEX1K devices */
diff --git a/include/altera.h b/include/altera.h
index 74b6729f90..7b8cb4a55d 100644
--- a/include/altera.h
+++ b/include/altera.h
@@ -34,8 +34,10 @@
/* Altera Model definitions
*********************************************************************/
#define CFG_ACEX1K CFG_FPGA_DEV( 0x1 )
+#define CFG_CYCLON2 CFG_FPGA_DEV( 0x2 )
#define CFG_ALTERA_ACEX1K (CFG_FPGA_ALTERA | CFG_ACEX1K)
+#define CFG_ALTERA_CYCLON2 (CFG_FPGA_ALTERA | CFG_CYCLON2)
/* Add new models here */
/* Altera Interface definitions
@@ -56,6 +58,7 @@ typedef enum { /* typedef Altera_iface */
typedef enum { /* typedef Altera_Family */
min_altera_type, /* insert all new types after this */
Altera_ACEX1K, /* ACEX1K Family */
+ Altera_CYC2, /* CYCLONII Family */
/* Add new models here */
max_altera_type /* insert all new types before this */
} Altera_Family; /* end, typedef Altera_Family */
@@ -84,6 +87,7 @@ typedef int (*Altera_status_fn)( int cookie );
typedef int (*Altera_done_fn)( int cookie );
typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie );
typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie );
+typedef int (*Altera_write_fn)(void *buf, size_t len, int flush, int cookie);
typedef int (*Altera_abort_fn)( int cookie );
typedef int (*Altera_post_fn)( int cookie );
OpenPOWER on IntegriCloud