diff options
| -rw-r--r-- | board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg | 74 | ||||
| -rw-r--r-- | board/solidrun/mx6-microsom/clocks.cfg | 33 | ||||
| -rw-r--r-- | board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg | 76 |
3 files changed, 0 insertions, 183 deletions
diff --git a/board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg b/board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg deleted file mode 100644 index 40747abbdb..0000000000 --- a/board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2013 SolidRun ltd. - * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ZQ Calibrations */ -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 -/* write leveling */ -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x005a0057 -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x004a0052 -/* - * DQS gating, read delay, write delay calibration values - * based on calibration compare of 0x00ffff00 - */ -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x02480240 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x02340230 -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40404440 -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x38343034 -/* read data bit delay */ -DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -/* Complete calibration by forced measurement */ -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 - -/* - * MMDC init: - * in DDR3, 32-bit mode, only MMDC0 is initiated: - */ -DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002d -DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 - -DATA 4, MX6_MMDC_P0_MDCFG0, 0x3f435313 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xb66e8b63 - -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db -DATA 4, MX6_MMDC_P0_MDMISC, 0x00011740 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2 -DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 -/* CS0_END - 0x2fffffff, 512M */ -DATA 4, MX6_MMDC_P0_MDASP, 0x00000017 - -/* MMDC0_MAARCR ADOPT optimized priorities. Dyn jump disabled */ -DATA 4, 0x021b0400, 0x11420000 - -/* MMDC0_MDCTL- row-14bits; col-10bits; burst length 8;32-bit data bus */ -DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000 - -/* - * Initialize 2GB DDR3 - Hynix H5TQ2G63BFR-H9C - * MR2 - */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008032 -/* MR3 */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -/* MR1 */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008031 -/* MR0 */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 -/* ZQ calibration */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -/* final DDR setup */ -DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007 -DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556d -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 diff --git a/board/solidrun/mx6-microsom/clocks.cfg b/board/solidrun/mx6-microsom/clocks.cfg deleted file mode 100644 index 12888113fb..0000000000 --- a/board/solidrun/mx6-microsom/clocks.cfg +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2013 SolidRun ltd. - * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* set the default clock gate to save power */ -DATA 4, CCM_CCGR0, 0x00C03F3F -DATA 4, CCM_CCGR1, 0x0030FC03 -DATA 4, CCM_CCGR2, 0x0FFFC000 -DATA 4, CCM_CCGR3, 0x3FF00000 -DATA 4, CCM_CCGR4, 0x00FFF300 -DATA 4, CCM_CCGR5, 0x0F0000C3 -DATA 4, CCM_CCGR6, 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4, MX6_IOMUXC_GPR6, 0x007F007F -DATA 4, MX6_IOMUXC_GPR7, 0x007F007F - -/* - * Setup CCM_CCOSR register as follows: - * - * cko1_en = 1 --> CKO1 enabled - * cko1_div = 111 --> divide by 8 - * cko1_sel = 1011 --> ahb_clk_root - * - * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz - */ -DATA 4, CCM_CCOSR, 0x000000fb diff --git a/board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg b/board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg deleted file mode 100644 index f92fc19de4..0000000000 --- a/board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2013 SolidRun ltd. - * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * DDR3 settings - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), - * memory bus width: 64 bits x16/x32/x64 - * MX6DL ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 64 bits x16/x32/x64 - * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 32 bits x16/x32 - */ -/* DDR IO TYPE */ -DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000c0000 -DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -/* Clock */ -DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 -/* Address */ -DATA 4, MX6_IOM_DRAM_CAS, 0x00000010 -DATA 4, MX6_IOM_DRAM_RAS, 0x00000010 -DATA 4, MX6_IOM_GRP_ADDDS, 0x00000010 -/* Control */ -DATA 4, MX6_IOM_DRAM_RESET, 0x00000010 -DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 -DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000 -DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000010 -DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000010 -DATA 4, MX6_IOM_GRP_CTLDS, 0x00000010 - -/* - * Data Strobe: IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL - DDR_INPUT=0, CMOS, - * CMOS mode saves power, but have less timing margin in case of DDR - * timing issue on your board you can try DDR_MODE: [= 0x00020000] - */ -DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 - -DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000000 - -/* - * DATA:IOMUXC_SW_PAD_CTL_GRP_DDRMODE - DDR_INPUT=0, CMOS, - * CMOS mode saves power, but have less timing margin in case of DDR - * timing issue on your board you can try DDR_MODE: [= 0x00020000] - */ -DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 - -DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B4DS, 0x00000000 -DATA 4, MX6_IOM_GRP_B5DS, 0x00000000 -DATA 4, MX6_IOM_GRP_B6DS, 0x00000000 -DATA 4, MX6_IOM_GRP_B7DS, 0x00000000 - -DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM4, 0x00000000 -DATA 4, MX6_IOM_DRAM_DQM5, 0x00000000 -DATA 4, MX6_IOM_DRAM_DQM6, 0x00000000 -DATA 4, MX6_IOM_DRAM_DQM7, 0x00000000 |
