summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS1
-rwxr-xr-xMAKEALL2
-rw-r--r--Makefile3
-rw-r--r--board/amcc/bubinga/bubinga.c13
-rw-r--r--board/amcc/taihu/taihu.c6
-rw-r--r--board/zeus/Makefile51
-rw-r--r--board/zeus/config.mk24
-rw-r--r--board/zeus/u-boot.lds133
-rw-r--r--board/zeus/update.c105
-rw-r--r--board/zeus/zeus.c511
-rw-r--r--cpu/ppc4xx/sdram.c27
-rw-r--r--cpu/ppc4xx/sdram.h2
-rw-r--r--cpu/ppc4xx/start.S48
-rw-r--r--doc/README.zeus73
-rw-r--r--include/configs/zeus.h375
-rw-r--r--include/ppc405.h14
16 files changed, 1344 insertions, 44 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 6dd43f8619..853afeb4d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -293,6 +293,7 @@ Stefan Roese <sr@denx.de>
walnut PPC405GP
yellowstone PPC440GR
yosemite PPC440EP
+ zeus PPC405EP
P3M750 PPC750FX/GX/GL
diff --git a/MAKEALL b/MAKEALL
index f69134a63e..00cb6b5351 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -91,7 +91,7 @@ LIST_4xx=" \
sc3 sequoia sequoia_nand taihu \
taishan VOH405 VOM405 W7OLMC \
W7OLMG walnut WUH405 XPEDITE1K \
- yellowstone yosemite yucca \
+ yellowstone yosemite yucca zeus \
"
#########################################################################
diff --git a/Makefile b/Makefile
index d4fd34e43f..d75f8fdddb 100644
--- a/Makefile
+++ b/Makefile
@@ -1294,6 +1294,9 @@ yellowstone_config: unconfig
yucca_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
+zeus_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
+
#########################################################################
## MPC8220 Systems
#########################################################################
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
index fe6ce8a6d1..66e7509da8 100644
--- a/board/amcc/bubinga/bubinga.c
+++ b/board/amcc/bubinga/bubinga.c
@@ -20,10 +20,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-long int spd_sdram(void);
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
+
+long int spd_sdram(void);
int board_early_init_f(void)
{
@@ -34,6 +36,15 @@ int board_early_init_f(void)
mtdcr(uictr, 0x00000010); /* set int trigger levels */
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ /*
+ * Configure CPC0_PCI to enable PerWE as output
+ * and enable the internal PCI arbiter if selected
+ */
+ if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB)
+ mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+ else
+ mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN);
+
return 0;
}
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index ee9d3b5446..ea83671988 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -50,6 +50,12 @@ int board_early_init_f(void)
mtebc(pb3ap, CFG_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */
mtebc(pb3cr, CFG_EBC_PB3CR);
+ /*
+ * Configure CPC0_PCI to enable PerWE as output
+ * and enable the internal PCI arbiter
+ */
+ mtdcr(cpc0_pci, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+
return 0;
}
diff --git a/board/zeus/Makefile b/board/zeus/Makefile
new file mode 100644
index 0000000000..f0d4e9f3f4
--- /dev/null
+++ b/board/zeus/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o update.o
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/zeus/config.mk b/board/zeus/config.mk
new file mode 100644
index 0000000000..1bdf5e4fcf
--- /dev/null
+++ b/board/zeus/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds
new file mode 100644
index 0000000000..73b83eba40
--- /dev/null
+++ b/board/zeus/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/zeus/update.c b/board/zeus/update.c
new file mode 100644
index 0000000000..c76519f094
--- /dev/null
+++ b/board/zeus/update.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+
+#if defined(CONFIG_ZEUS)
+
+u8 buf_zeus_ce[] = {
+/*00 01 02 03 04 05 06 07 */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*08 09 0a 0b 0c 0d 0e 0f */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*10 11 12 13 14 15 16 17 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*18 19 1a 1b 1c 1d 1e 1f */
+ 0x00, 0xc0, 0x50, 0x12, 0x72, 0x3e, 0x00, 0x00 };
+
+u8 buf_zeus_pe[] = {
+
+/* CPU_CLOCK_DIV 1 = 00
+ CPU_PLB_FREQ_DIV 3 = 10
+ OPB_PLB_FREQ_DIV 2 = 01
+ EBC_PLB_FREQ_DIV 2 = 00
+ MAL_PLB_FREQ_DIV 1 = 00
+ PCI_PLB_FRQ_DIV 3 = 10
+ PLL_PLLOUTA = IS SET
+ PLL_OPERATING = IS NOT SET
+ PLL_FDB_MUL 10 = 1010
+ PLL_FWD_DIV_A 3 = 101
+ PLL_FWD_DIV_B 3 = 101
+ TUNE = 0x2be */
+/*00 01 02 03 04 05 06 07 */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*08 09 0a 0b 0c 0d 0e 0f */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*10 11 12 13 14 15 16 17 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*18 19 1a 1b 1c 1d 1e 1f */
+ 0x00, 0x60, 0x68, 0x2d, 0x42, 0xbe, 0x00, 0x00 };
+
+static int update_boot_eeprom(void)
+{
+ u32 len = 0x20;
+ u8 chip = CFG_I2C_EEPROM_ADDR;
+ u8 *pbuf;
+ u8 base;
+ int i;
+
+ if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE)) {
+ pbuf = buf_zeus_pe;
+ base = 0x40;
+ } else {
+ pbuf = buf_zeus_ce;
+ base = 0x00;
+ }
+
+ for (i = 0; i < len; i++, base++) {
+ if (i2c_write(chip, base, 1, &pbuf[i], 1) != 0) {
+ printf("i2c_write fail\n");
+ return 1;
+ }
+ udelay(11000);
+ }
+
+ return 0;
+}
+
+int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
+{
+ return update_boot_eeprom();
+}
+
+U_BOOT_CMD (
+ update_boot_eeprom, 1, 1, do_update_boot_eeprom,
+ "update_boot_eeprom - update boot eeprom content\n",
+ NULL
+);
+
+#endif
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
new file mode 100644
index 0000000000..4ab853f8f5
--- /dev/null
+++ b/board/zeus/zeus.c
@@ -0,0 +1,511 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <environment.h>
+#include <logbuff.h>
+#include <post.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define REBOOT_MAGIC 0x07081967
+#define REBOOT_NOP 0x00000000
+#define REBOOT_DO_POST 0x00000001
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern env_t *env_ptr;
+extern uchar default_environment[];
+
+ulong flash_get_size(ulong base, int banknum);
+void env_crc_update(void);
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+static u32 start_time;
+
+int board_early_init_f(void)
+{
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000);
+ mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */
+ mtdcr(uictr, 0x00000000); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+
+ /*
+ * Configure CPC0_PCI to enable PerWE as output
+ */
+ mtdcr(cpc0_pci, CPC0_PCI_SPE);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u32 pbcr;
+ int size_val = 0;
+ u32 post_magic;
+ u32 post_val;
+
+ post_magic = in_be32((void *)CFG_POST_MAGIC);
+ post_val = in_be32((void *)CFG_POST_VAL);
+ if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) {
+ /*
+ * Set special bootline bootparameter to pass this POST boot
+ * mode to Linux to reset the username/password
+ */
+ setenv("addmisc", "setenv bootargs \\${bootargs} factory_reset=yes");
+
+ /*
+ * Normally don't run POST tests, only when enabled
+ * via the sw-reset button. So disable further tests
+ * upon next bootup here.
+ */
+ out_be32((void *)CFG_POST_VAL, REBOOT_NOP);
+ } else {
+ /*
+ * Only run POST when initiated via the sw-reset button mechanism
+ */
+ post_word_store(0);
+ }
+
+ /*
+ * Get current time
+ */
+ start_time = get_timer(0);
+
+ /*
+ * FLASH stuff...
+ */
+
+ /* Re-do sizing to get full correct info */
+
+ /* adjust flash start and offset */
+ mfebc(pb0cr, pbcr);
+ switch (gd->bd->bi_flashsize) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ case 32 << 20:
+ size_val = 5;
+ break;
+ case 64 << 20:
+ size_val = 6;
+ break;
+ case 128 << 20:
+ size_val = 7;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+ mtebc(pb0cr, pbcr);
+
+ /*
+ * Re-check to get correct base address
+ */
+ flash_get_size(gd->bd->bi_flashstart, 0);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ /* Env protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ puts("Board: Zeus-");
+
+ if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE))
+ puts("PE");
+ else
+ puts("CE");
+
+ puts(" of BulletEndPoint");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ /* both LED's off */
+ gpio_write_bit(CFG_GPIO_LED_RED, 0);
+ gpio_write_bit(CFG_GPIO_LED_GREEN, 0);
+ udelay(10000);
+ /* and on again */
+ gpio_write_bit(CFG_GPIO_LED_RED, 1);
+ gpio_write_bit(CFG_GPIO_LED_GREEN, 1);
+
+ return (0);
+}
+
+static u32 detect_sdram_size(void)
+{
+ u32 val;
+ u32 size;
+
+ mfsdram(mem_mb0cf, val);
+ size = (4 << 20) << ((val & 0x000e0000) >> 17);
+
+ /*
+ * Check if 2nd bank is enabled too
+ */
+ mfsdram(mem_mb1cf, val);
+ if (val & 1)
+ size += (4 << 20) << ((val & 0x000e0000) >> 17);
+
+ return size;
+}
+
+long int initdram (int board_type)
+{
+ return detect_sdram_size();
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+ unsigned long msr;
+ unsigned long total_kbytes;
+
+ total_kbytes = detect_sdram_size();
+
+ msr = mfmsr();
+ mtmsr(msr & ~(MSR_EE));
+
+ for (k = 0; k < total_kbytes ;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ mtmsr(msr);
+
+ return 0;
+}
+#endif
+
+static int default_env_var(char *buf, char *var)
+{
+ char *ptr;
+ char *val;
+
+ /*
+ * Find env variable
+ */
+ ptr = strstr(buf + 4, var);
+ if (ptr == NULL) {
+ printf("ERROR: %s not found!\n", var);
+ return -1;
+ }
+ ptr += strlen(var) + 1;
+
+ /*
+ * Now the ethaddr needs to be updated in the "normal"
+ * environment storage -> redundant flash.
+ */
+ val = ptr;
+ setenv(var, val);
+ printf("Updated %s from eeprom to %s!\n", var, val);
+
+ return 0;
+}
+
+static int restore_default(void)
+{
+ char *buf;
+ char *buf_save;
+ u32 crc;
+
+ /*
+ * Unprotect and erase environment area
+ */
+ flash_protect(FLAG_PROTECT_CLEAR,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+
+ flash_sect_erase(CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1);
+
+ /*
+ * Now restore default environment from U-Boot image
+ * -> ipaddr, serverip...
+ */
+ memset(env_ptr, 0, sizeof(env_t));
+ memcpy(env_ptr->data, default_environment, ENV_SIZE);
+#ifdef CFG_REDUNDAND_ENVIRONMENT
+ env_ptr->flags = 0xFF;
+#endif
+ env_crc_update();
+ gd->env_valid = 1;
+
+ /*
+ * Read board specific values from I2C EEPROM
+ * and set env variables accordingly
+ * -> ethaddr, eth1addr, serial#
+ */
+ buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
+ if (eeprom_read(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
+ (u8 *)buf, FACTORY_RESET_ENV_SIZE)) {
+ puts("\nError reading EEPROM!\n");
+ } else {
+ crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4);
+ if (crc != *(u32 *)buf) {
+ printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(u32 *)buf);
+ return -1;
+ }
+
+ default_env_var(buf, "ethaddr");
+ buf += 8 + 18;
+ default_env_var(buf, "eth1addr");
+ buf += 9 + 18;
+ default_env_var(buf, "serial#");
+ }
+
+ /*
+ * Finally save updated env variables back to flash
+ */
+ saveenv();
+
+ free(buf_save);
+
+ return 0;
+}
+
+int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *buf;
+ char *buf_save;
+ char str[32];
+ u32 crc;
+ char var[32];
+
+ if (argc < 4) {
+ puts("ERROR!\n");
+ return -1;
+ }
+
+ buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
+ memset(buf, 0, FACTORY_RESET_ENV_SIZE);
+
+ strcpy(var, "ethaddr");
+ printf("Setting %s to %s\n", var, argv[1]);
+ sprintf(str, "%s=%s", var, argv[1]);
+ strcpy(buf + 4, str);
+ buf += strlen(str) + 1;
+
+ strcpy(var, "eth1addr");
+ printf("Setting %s to %s\n", var, argv[2]);
+ sprintf(str, "%s=%s", var, argv[2]);
+ strcpy(buf + 4, str);
+ buf += strlen(str) + 1;
+
+ strcpy(var, "serial#");
+ printf("Setting %s to %s\n", var, argv[3]);
+ sprintf(str, "%s=%s", var, argv[3]);
+ strcpy(buf + 4, str);
+
+ crc = crc32(0, (u8 *)(buf_save + 4), FACTORY_RESET_ENV_SIZE - 4);
+ *(u32 *)buf_save = crc;
+
+ if (eeprom_write(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
+ (u8 *)buf_save, FACTORY_RESET_ENV_SIZE)) {
+ puts("\nError writing EEPROM!\n");
+ return -1;
+ }
+
+ free(buf_save);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ setdef, 4, 1, do_set_default,
+ "setdef - write board-specific values to EEPROM (ethaddr...)\n",
+ "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
+ );
+
+static inline int sw_reset_pressed(void)
+{
+ return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_SW_RESET));
+}
+
+int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
+{
+ int delta;
+ int count = 0;
+ int post = 0;
+ int factory_reset = 0;
+
+ if (!sw_reset_pressed()) {
+ printf("SW-Reset already high (Button released)\n");
+ printf("-> No action taken!\n");
+ return 0;
+ }
+
+ printf("Waiting for SW-Reset button to be released.");
+
+ while (1) {
+ delta = get_timer(start_time);
+ if (!sw_reset_pressed())
+ break;
+
+ if ((delta > CFG_TIME_POST) && !post) {
+ printf("\nWhen released now, POST tests will be started.");
+ gpio_write_bit(CFG_GPIO_LED_GREEN, 0);
+ post = 1;
+ }
+
+ if ((delta > CFG_TIME_FACTORY_RESET) && !factory_reset) {
+ printf("\nWhen released now, factory default values"
+ " will be restored.");
+ gpio_write_bit(CFG_GPIO_LED_RED, 0);
+ factory_reset = 1;
+ }
+
+ udelay(1000);
+ if (!(count++ % 1000))
+ printf(".");
+ }
+
+
+ printf("\nSW-Reset Button released after %d milli-seconds!\n", delta);
+
+ if (delta > CFG_TIME_FACTORY_RESET) {
+ printf("Starting factory reset value restoration...\n");
+
+ /*
+ * Restore default setting
+ */
+ restore_default();
+
+ /*
+ * Reset the board for default to become valid
+ */
+ do_reset(NULL, 0, 0, NULL);
+
+ return 0;
+ }
+
+ if (delta > CFG_TIME_POST) {
+ printf("Starting POST configuration...\n");
+
+ /*
+ * Enable POST upon next bootup
+ */
+ out_be32((void *)CFG_POST_MAGIC, REBOOT_MAGIC);
+ out_be32((void *)CFG_POST_VAL, REBOOT_DO_POST);
+ post_bootmode_init();
+
+ /*
+ * Reset the logbuffer for a clean start
+ */
+ logbuff_reset();
+
+ do_reset(NULL, 0, 0, NULL);
+
+ return 0;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD (
+ chkreset, 1, 1, do_chkreset,
+ "chkreset- Check for status of SW-reset button and act accordingly\n",
+ NULL
+);
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ u32 post_magic;
+ u32 post_val;
+
+ post_magic = in_be32((void *)CFG_POST_MAGIC);
+ post_val = in_be32((void *)CFG_POST_VAL);
+
+ if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST))
+ return 1;
+ else
+ return 0;
+}
+#endif /* CONFIG_POST */
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index 3a0ca17d9f..2724d91f0f 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -187,14 +187,14 @@ void sdram_init(void)
/*
* Disable memory controller.
*/
- mtsdram0(mem_mcopt1, 0x00000000);
+ mtsdram(mem_mcopt1, 0x00000000);
/*
* Set MB0CF for bank 0.
*/
- mtsdram0(mem_mb0cf, mb0cf[i].reg);
- mtsdram0(mem_sdtr1, sdtr1);
- mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
+ mtsdram(mem_mb0cf, mb0cf[i].reg);
+ mtsdram(mem_sdtr1, sdtr1);
+ mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
udelay(200);
@@ -203,7 +203,7 @@ void sdram_init(void)
* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
* read/prefetch.
*/
- mtsdram0(mem_mcopt1, 0x80800000);
+ mtsdram(mem_mcopt1, 0x80800000);
udelay(10000);
@@ -215,10 +215,21 @@ void sdram_init(void)
#ifdef CONFIG_SDRAM_BANK1
u32 b1cr = mb0cf[i].size | mb0cf[i].reg;
- mtsdram0(mem_mcopt1, 0x00000000);
- mtsdram0(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
- mtsdram0(mem_mcopt1, 0x80800000);
+ mtsdram(mem_mcopt1, 0x00000000);
+ mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
+ mtsdram(mem_mcopt1, 0x80800000);
udelay(10000);
+
+ /*
+ * Check if 2nd bank is really available.
+ * If the size not equal to the size of the first
+ * bank, then disable the 2nd bank completely.
+ */
+ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+ mb0cf[i].size) {
+ mtsdram(mem_mb1cf, 0);
+ mtsdram(mem_mcopt1, 0);
+ }
#endif
return;
}
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
index 62b5442f3b..4fb9b1ae14 100644
--- a/cpu/ppc4xx/sdram.h
+++ b/cpu/ppc4xx/sdram.h
@@ -29,8 +29,6 @@
#include <config.h>
-#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-
#define ONE_BILLION 1000000000
struct sdram_conf_s {
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 18d3445609..9626b65c88 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1869,38 +1869,7 @@ ppc405ep_init:
ori r3,r3,CFG_EBC_PB4CR@l
mtdcr ebccfgd,r3
#endif
-#ifdef CONFIG_TAIHU
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_0 /* serial eeprom present */
-#endif
-
-#ifndef CFG_CPC0_PCI
- li r3,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA
- /*
- !-----------------------------------------------------------------------
- ! Check FPGA for PCI internal/external arbitration
- ! If board is set to internal arbitration, update cpc0_pci
- !-----------------------------------------------------------------------
- */
- addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */
- ori r5,r5,FPGA_REG1@l
- lbz r5,0x0(r5) /* read to get PCI arb selection */
- andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/
- beq ..pci_cfg_set /* if not set, then bypass reg write*/
-#endif
- ori r3,r3,CPC0_PCI_ARBIT_EN
-#ifdef CONFIG_TAIHU
- ori r3,r3,CPC0_PCI_SPE
-#endif
-#else /* CFG_CPC0_PCI */
- li r3,CFG_CPC0_PCI
-#endif /* CFG_CPC0_PCI */
-..pci_cfg_set:
- mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/
-strap_0:
/*
!-----------------------------------------------------------------------
! Check to see if chip is in bypass mode.
@@ -1966,6 +1935,21 @@ strap_0:
bne _pci_66mhz
#endif /* CONFIG_TAIHU */
+#if defined(CONFIG_ZEUS)
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ lis r3,0x0000
+ addi r3,r3,0x3030
+ lis r4,0x8042
+ addi r4,r4,0x223e
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+ b 1f
+#endif
+
addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
ori r3,r3,PLLMR0_DEFAULT@l /* */
addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
@@ -1982,9 +1966,9 @@ _pci_66mhz:
strap_1:
mfdcr r3, CPC0_PLLMR0
mfdcr r4, CPC0_PLLMR1
-1:
#endif /* CONFIG_TAIHU */
+1:
b pll_write /* Write the CPC0_PLLMR with new value */
pll_done:
diff --git a/doc/README.zeus b/doc/README.zeus
new file mode 100644
index 0000000000..1848d8cd38
--- /dev/null
+++ b/doc/README.zeus
@@ -0,0 +1,73 @@
+
+Storage of the board specific values (ethaddr...)
+-------------------------------------------------
+
+The board specific environment variables that should be unique
+for each individual board, can be stored in the I2C EEPROM. This
+will be done from offset 0x80 with the length of 0x80 bytes. The
+following command can be used to store the values here:
+
+=> setdef de:20:6a:ed:e2:72 de:20:6a:ed:e2:73 AB0001
+
+ ethaddr eth1addr serial#
+
+Now those 3 values are stored into the I2C EEPROM. A CRC is added
+to make sure that the values get not corrupted.
+
+
+SW-Reset Pushbutton handling:
+-----------------------------
+
+The SW-reset push button is connected to a GPIO input too. This
+way U-Boot can "see" how long the SW-reset was pressed, and a
+specific action can be taken. Two different actions are supported:
+
+a) Release after more than 5 seconds and less then 10 seconds:
+ -> Run POST
+
+ Please note, that the POST test will take a while (approx. 1 min
+ on the 128MByte board). This is mainly due to the system memory
+ test.
+
+b) Release after more than 10 seconds:
+ -> Restore factory default settings
+
+ The factory default values are restored. The default environment
+ variables are restored (ipaddr, serverip...) and the board
+ specific values (ethaddr, eth1addr and serial#) are restored
+ to the environment from the I2C EEPROM. Also a bootline parameter
+ is added to the Linux bootline to signal the Linux kernel upon
+ the next startup, that the factory defaults should be restored.
+
+The command to check this sw-reset status and act accordingly is
+
+=> chkreset
+
+This command is added to the default "bootcmd", so that it is called
+automatically upon startup.
+
+Also, the 2 LED's are used to indicate the current status of this
+command (time passed since pushing the button). When the POST test
+will be run, the green LED will be switched off, and when the
+factory restore will be initiated, the reg LED will be switched off.
+
+
+Loggin of POST results:
+-----------------------
+
+The results of the POST tests are logged in a logbuffer located at the end
+of the onboard memory. It can be accessed with the U-Boot command "log":
+
+=> log show
+<4>POST memory PASSED
+<4>POST cache PASSED
+<4>POST cpu PASSED
+<4>POST uart PASSED
+<4>POST ethernet PASSED
+
+The DENX Linux kernel tree has support for this log buffer included. Exactly
+this buffer is used for logging of all kernel messages too. By enabling the
+compile time option "CONFIG_LOGBUFFER" this support is enabled. This way you
+can access the U-Boot log messages from Linux too.
+
+2007-08-10, Stefan Roese <sr@denx.de>
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
new file mode 100644
index 0000000000..86a16e77a5
--- /dev/null
+++ b/include/configs/zeus.h
@@ -0,0 +1,375 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * zeus.h - configuration for Zeus board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ZEUS 1 /* Board is Zeus */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405EP 1 /* Specifc 405EP support*/
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+#define PLLMR0_DEFAULT PLLMR0_333_111_55_111
+#define PLLMR1_DEFAULT PLLMR1_333_111_55_111
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x01 /* PHY address */
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_LOG | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO)
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_CACHE | \
+ CFG_POST_UART | \
+ CFG_POST_ETHER)
+
+#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE {UART0_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*-----------------------------------------------------------------------
+ * SDRAM
+ *----------------------------------------------------------------------*/
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */
+
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CFG_BASE_BAUD 691200
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* these are for the ST M24C02 2kbit serial i2c eeprom */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+
+#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */
+#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+/*
+ * The layout of the I2C EEPROM, used for bootstrap setup and for board-
+ * specific values, like ethaddr... that can be restored via the sw-reset
+ * button
+ */
+#define FACTORY_RESET_I2C_EEPROM 0x50
+#define FACTORY_RESET_ENV_OFFS 0x80
+#define FACTORY_RESET_ENV_SIZE 0x80
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFF000000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in OCM */
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12)
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash 16M) initialization */
+#define CFG_EBC_PB0AP 0x05815600
+#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0] - External Bus Controller BLAST output
+ * GPIO0[1-9] - Instruction trace outputs
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
+ */
+#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */
+#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */
+#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */
+#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */
+#define CFG_GPIO0_TSRH 0x00000000
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */
+#define CFG_GPIO0_ODR 0x00000000
+
+#define CFG_GPIO_SW_RESET 1
+#define CFG_GPIO_ZEUS_PE 12
+#define CFG_GPIO_LED_RED 22
+#define CFG_GPIO_LED_GREEN 23
+
+/* Time in milli-seconds */
+#define CFG_TIME_POST 5000
+#define CFG_TIME_FACTORY_RESET 10000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* ENVIRONMENT VARS */
+
+#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo"
+#define CONFIG_IPADDR 192.168.1.10
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_GATEWAYIP 192.168.1.100
+#define CONFIG_ETHADDR 50:00:00:00:06:00
+#define CONFIG_ETH1ADDR 50:00:00:00:06:01
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "logversion=2\0" \
+ "hostname=zeus\0" \
+ "netdev=eth0\0" \
+ "ethact=ppc_4xx_eth0\0" \
+ "netmask=255.255.255.0\0" \
+ "ramdisk_size=50000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw" \
+ " nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw" \
+ " ramdisk=${ramdisk_size}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0," \
+ "${baudrate}\0" \
+ "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \
+ "run nfsargs addip addtty;bootm\0" \
+ "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \
+ "tftp ${ramdisk_mem_addr} ${file_fs};" \
+ "run ramargs addip addtty;" \
+ "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \
+ "rootpath=/target_fs/zeus\0" \
+ "kernel_fl_addr=ff000000\0" \
+ "kernel_mem_addr=200000\0" \
+ "ramdisk_fl_addr=ff300000\0" \
+ "ramdisk_mem_addr=4000000\0" \
+ "uboot_fl_addr=fffc0000\0" \
+ "uboot_mem_addr=100000\0" \
+ "file_uboot=/zeus/u-boot.bin\0" \
+ "tftp_uboot=tftp 100000 ${file_uboot}\0" \
+ "update_uboot=protect off fffc0000 ffffffff;" \
+ "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \
+ "protect on fffc0000 ffffffff\0" \
+ "upd_uboot=run tftp_uboot;run update_uboot\0" \
+ "file_kernel=/zeus/uImage_ba\0" \
+ "tftp_kernel=tftp 100000 ${file_kernel}\0" \
+ "update_kernel=protect off ff000000 ff17ffff;" \
+ "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \
+ "upd_kernel=run tftp_kernel;run update_kernel\0" \
+ "file_fs=/zeus/rootfs_ba.img\0" \
+ "tftp_fs=tftp 100000 ${file_fs}\0" \
+ "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
+ "cp.b 100000 ff300000 580000\0" \
+ "upd_fs=run tftp_fs;run update_fs\0" \
+ "bootcmd=chkreset;run ramargs addip addtty addmisc;" \
+ "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \
+ ""
+
+#endif /* __CONFIG_H */
diff --git a/include/ppc405.h b/include/ppc405.h
index 8e64731929..4fc52833d4 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -541,6 +541,18 @@
#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_1)
+#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
/*
* PLL Voltage Controlled Oscillator (VCO) definitions
@@ -1226,6 +1238,8 @@
#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
+#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
#ifndef __ASSEMBLY__
OpenPOWER on IntegriCloud