summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/x86/Kconfig20
-rw-r--r--arch/x86/cpu/ivybridge/Kconfig1
-rw-r--r--arch/x86/cpu/ivybridge/Makefile3
-rw-r--r--arch/x86/cpu/ivybridge/early_me.c191
-rw-r--r--arch/x86/cpu/ivybridge/me_status.c195
-rw-r--r--arch/x86/cpu/ivybridge/report_platform.c89
-rw-r--r--arch/x86/cpu/ivybridge/sdram.c553
-rw-r--r--arch/x86/cpu/start.S10
-rw-r--r--arch/x86/dts/link.dts111
-rw-r--r--arch/x86/include/asm/arch-ivybridge/me.h356
-rw-r--r--arch/x86/include/asm/arch-ivybridge/pch.h113
-rw-r--r--arch/x86/include/asm/arch-ivybridge/pei_data.h121
-rw-r--r--arch/x86/include/asm/arch-ivybridge/sandybridge.h2
-rw-r--r--arch/x86/include/asm/config.h1
-rw-r--r--arch/x86/include/asm/global_data.h13
-rw-r--r--arch/x86/include/asm/post.h5
-rw-r--r--arch/x86/include/asm/u-boot-x86.h2
-rw-r--r--arch/x86/lib/Makefile1
-rw-r--r--arch/x86/lib/ramtest.c79
-rw-r--r--include/configs/chromebook_link.h4
-rw-r--r--include/configs/x86-common.h2
-rw-r--r--include/fdtdec.h1
-rw-r--r--lib/fdtdec.c1
23 files changed, 1868 insertions, 6 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f27d731bfd..43c22ff7a5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -50,6 +50,17 @@ config CPU_ADDR_BITS
int
default 36
+config HPET_ADDRESS
+ hex
+ default 0xfed00000 if !HPET_ADDRESS_OVERRIDE
+
+config SMM_TSEG
+ bool
+ default n
+
+config SMM_TSEG_SIZE
+ hex
+
config ROM_SIZE
hex
default 0x800000
@@ -63,6 +74,15 @@ config HAVE_INTEL_ME
SPI flash format. You will need to supply the me.bin file in
your board directory.
+config X86_RAMTEST
+ bool "Perform a simple RAM test after SDRAM initialisation"
+ help
+ If there is something wrong with SDRAM then the platform will
+ often crash within U-Boot or the kernel. This option enables a
+ very simple RAM test that quickly checks whether the SDRAM seems
+ to work correctly. It is not exhaustive but can save time by
+ detecting obvious failures.
+
source "arch/x86/cpu/ivybridge/Kconfig"
source "board/chromebook-x86/coreboot/Kconfig"
diff --git a/arch/x86/cpu/ivybridge/Kconfig b/arch/x86/cpu/ivybridge/Kconfig
index 177247edc6..afca9579da 100644
--- a/arch/x86/cpu/ivybridge/Kconfig
+++ b/arch/x86/cpu/ivybridge/Kconfig
@@ -129,6 +129,7 @@ config CPU_SPECIFIC_OPTIONS
select CPU_MICROCODE_IN_CBFS
select TSC_SYNC_MFENCE
select HAVE_INTEL_ME
+ select X86_RAMTEST
config SMM_TSEG_SIZE
hex
diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile
index e5c0751e65..721b37e628 100644
--- a/arch/x86/cpu/ivybridge/Makefile
+++ b/arch/x86/cpu/ivybridge/Makefile
@@ -7,7 +7,10 @@
obj-y += car.o
obj-y += cpu.o
obj-y += early_init.o
+obj-y += early_me.o
obj-y += lpc.o
+obj-y += me_status.o
obj-y += microcode_intel.o
obj-y += pci.o
+obj-y += report_platform.o
obj-y += sdram.o
diff --git a/arch/x86/cpu/ivybridge/early_me.c b/arch/x86/cpu/ivybridge/early_me.c
new file mode 100644
index 0000000000..b24dea10b1
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/early_me.c
@@ -0,0 +1,191 @@
+/*
+ * From Coreboot src/southbridge/intel/bd82x6x/early_me.c
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/arch/me.h>
+#include <asm/arch/pch.h>
+#include <asm/io.h>
+
+static const char *const me_ack_values[] = {
+ [ME_HFS_ACK_NO_DID] = "No DID Ack received",
+ [ME_HFS_ACK_RESET] = "Non-power cycle reset",
+ [ME_HFS_ACK_PWR_CYCLE] = "Power cycle reset",
+ [ME_HFS_ACK_S3] = "Go to S3",
+ [ME_HFS_ACK_S4] = "Go to S4",
+ [ME_HFS_ACK_S5] = "Go to S5",
+ [ME_HFS_ACK_GBL_RESET] = "Global Reset",
+ [ME_HFS_ACK_CONTINUE] = "Continue to boot"
+};
+
+static inline void pci_read_dword_ptr(void *ptr, int offset)
+{
+ u32 dword;
+
+ dword = pci_read_config32(PCH_ME_DEV, offset);
+ memcpy(ptr, &dword, sizeof(dword));
+}
+
+static inline void pci_write_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = 0;
+ memcpy(&dword, ptr, sizeof(dword));
+ pci_write_config32(PCH_ME_DEV, offset, dword);
+}
+
+void intel_early_me_status(void)
+{
+ struct me_hfs hfs;
+ struct me_gmes gmes;
+
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ pci_read_dword_ptr(&gmes, PCI_ME_GMES);
+
+ intel_me_status(&hfs, &gmes);
+}
+
+int intel_early_me_init(void)
+{
+ int count;
+ struct me_uma uma;
+ struct me_hfs hfs;
+
+ debug("Intel ME early init\n");
+
+ /* Wait for ME UMA SIZE VALID bit to be set */
+ for (count = ME_RETRY; count > 0; --count) {
+ pci_read_dword_ptr(&uma, PCI_ME_UMA);
+ if (uma.valid)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!count) {
+ printf("ERROR: ME is not ready!\n");
+ return -EBUSY;
+ }
+
+ /* Check for valid firmware */
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ if (hfs.fpt_bad) {
+ printf("WARNING: ME has bad firmware\n");
+ return -EBADF;
+ }
+
+ debug("Intel ME firmware is ready\n");
+
+ return 0;
+}
+
+int intel_early_me_uma_size(void)
+{
+ struct me_uma uma;
+
+ pci_read_dword_ptr(&uma, PCI_ME_UMA);
+ if (uma.valid) {
+ debug("ME: Requested %uMB UMA\n", uma.size);
+ return uma.size;
+ }
+
+ debug("ME: Invalid UMA size\n");
+ return -EINVAL;
+}
+
+static inline void set_global_reset(int enable)
+{
+ u32 etr3;
+
+ etr3 = pci_read_config32(PCH_LPC_DEV, ETR3);
+
+ /* Clear CF9 Without Resume Well Reset Enable */
+ etr3 &= ~ETR3_CWORWRE;
+
+ /* CF9GR indicates a Global Reset */
+ if (enable)
+ etr3 |= ETR3_CF9GR;
+ else
+ etr3 &= ~ETR3_CF9GR;
+
+ pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
+}
+
+int intel_early_me_init_done(u8 status)
+{
+ u8 reset;
+ int count;
+ u32 mebase_l, mebase_h;
+ struct me_hfs hfs;
+ struct me_did did = {
+ .init_done = ME_INIT_DONE,
+ .status = status
+ };
+
+ /* MEBASE from MESEG_BASE[35:20] */
+ mebase_l = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L);
+ mebase_h = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H);
+ mebase_h &= 0xf;
+ did.uma_base = (mebase_l >> 20) | (mebase_h << 12);
+
+ /* Send message to ME */
+ debug("ME: Sending Init Done with status: %d, UMA base: 0x%04x\n",
+ status, did.uma_base);
+
+ pci_write_dword_ptr(&did, PCI_ME_H_GS);
+
+ /* Must wait for ME acknowledgement */
+ for (count = ME_RETRY; count > 0; --count) {
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ if (hfs.bios_msg_ack)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!count) {
+ printf("ERROR: ME failed to respond\n");
+ return -1;
+ }
+
+ /* Return the requested BIOS action */
+ debug("ME: Requested BIOS Action: %s\n", me_ack_values[hfs.ack_data]);
+
+ /* Check status after acknowledgement */
+ intel_early_me_status();
+
+ reset = 0;
+ switch (hfs.ack_data) {
+ case ME_HFS_ACK_CONTINUE:
+ /* Continue to boot */
+ return 0;
+ case ME_HFS_ACK_RESET:
+ /* Non-power cycle reset */
+ set_global_reset(0);
+ reset = 0x06;
+ break;
+ case ME_HFS_ACK_PWR_CYCLE:
+ /* Power cycle reset */
+ set_global_reset(0);
+ reset = 0x0e;
+ break;
+ case ME_HFS_ACK_GBL_RESET:
+ /* Global reset */
+ set_global_reset(1);
+ reset = 0x0e;
+ break;
+ case ME_HFS_ACK_S3:
+ case ME_HFS_ACK_S4:
+ case ME_HFS_ACK_S5:
+ break;
+ }
+
+ /* Perform the requested reset */
+ if (reset) {
+ outb(reset, 0xcf9);
+ cpu_hlt();
+ }
+ return -1;
+}
diff --git a/arch/x86/cpu/ivybridge/me_status.c b/arch/x86/cpu/ivybridge/me_status.c
new file mode 100644
index 0000000000..15cf69f40e
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/me_status.c
@@ -0,0 +1,195 @@
+/*
+ * From Coreboot src/southbridge/intel/bd82x6x/me_status.c
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/arch/me.h>
+
+/* HFS1[3:0] Current Working State Values */
+static const char *const me_cws_values[] = {
+ [ME_HFS_CWS_RESET] = "Reset",
+ [ME_HFS_CWS_INIT] = "Initializing",
+ [ME_HFS_CWS_REC] = "Recovery",
+ [ME_HFS_CWS_NORMAL] = "Normal",
+ [ME_HFS_CWS_WAIT] = "Platform Disable Wait",
+ [ME_HFS_CWS_TRANS] = "OP State Transition",
+ [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In"
+};
+
+/* HFS1[8:6] Current Operation State Values */
+static const char *const me_opstate_values[] = {
+ [ME_HFS_STATE_PREBOOT] = "Preboot",
+ [ME_HFS_STATE_M0_UMA] = "M0 with UMA",
+ [ME_HFS_STATE_M3] = "M3 without UMA",
+ [ME_HFS_STATE_M0] = "M0 without UMA",
+ [ME_HFS_STATE_BRINGUP] = "Bring up",
+ [ME_HFS_STATE_ERROR] = "M0 without UMA but with error"
+};
+
+/* HFS[19:16] Current Operation Mode Values */
+static const char *const me_opmode_values[] = {
+ [ME_HFS_MODE_NORMAL] = "Normal",
+ [ME_HFS_MODE_DEBUG] = "Debug",
+ [ME_HFS_MODE_DIS] = "Soft Temporary Disable",
+ [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper",
+ [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message"
+};
+
+/* HFS[15:12] Error Code Values */
+static const char *const me_error_values[] = {
+ [ME_HFS_ERROR_NONE] = "No Error",
+ [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure",
+ [ME_HFS_ERROR_IMAGE] = "Image Failure",
+ [ME_HFS_ERROR_DEBUG] = "Debug Failure"
+};
+
+/* GMES[31:28] ME Progress Code */
+static const char *const me_progress_values[] = {
+ [ME_GMES_PHASE_ROM] = "ROM Phase",
+ [ME_GMES_PHASE_BUP] = "BUP Phase",
+ [ME_GMES_PHASE_UKERNEL] = "uKernel Phase",
+ [ME_GMES_PHASE_POLICY] = "Policy Module",
+ [ME_GMES_PHASE_MODULE] = "Module Loading",
+ [ME_GMES_PHASE_UNKNOWN] = "Unknown",
+ [ME_GMES_PHASE_HOST] = "Host Communication"
+};
+
+/* GMES[27:24] Power Management Event */
+static const char *const me_pmevent_values[] = {
+ [0x00] = "Clean Moff->Mx wake",
+ [0x01] = "Moff->Mx wake after an error",
+ [0x02] = "Clean global reset",
+ [0x03] = "Global reset after an error",
+ [0x04] = "Clean Intel ME reset",
+ [0x05] = "Intel ME reset due to exception",
+ [0x06] = "Pseudo-global reset",
+ [0x07] = "S0/M0->Sx/M3",
+ [0x08] = "Sx/M3->S0/M0",
+ [0x09] = "Non-power cycle reset",
+ [0x0a] = "Power cycle reset through M3",
+ [0x0b] = "Power cycle reset through Moff",
+ [0x0c] = "Sx/Mx->Sx/Moff"
+};
+
+/* Progress Code 0 states */
+static const char *const me_progress_rom_values[] = {
+ [0x00] = "BEGIN",
+ [0x06] = "DISABLE"
+};
+
+/* Progress Code 1 states */
+static const char *const me_progress_bup_values[] = {
+ [0x00] = "Initialization starts",
+ [0x01] = "Disable the host wake event",
+ [0x04] = "Flow determination start process",
+ [0x08] = "Error reading/matching the VSCC table in the descriptor",
+ [0x0a] = "Check to see if straps say ME DISABLED",
+ [0x0b] = "Timeout waiting for PWROK",
+ [0x0d] = "Possibly handle BUP manufacturing override strap",
+ [0x11] = "Bringup in M3",
+ [0x12] = "Bringup in M0",
+ [0x13] = "Flow detection error",
+ [0x15] = "M3 clock switching error",
+ [0x18] = "M3 kernel load",
+ [0x1c] = "T34 missing - cannot program ICC",
+ [0x1f] = "Waiting for DID BIOS message",
+ [0x20] = "Waiting for DID BIOS message failure",
+ [0x21] = "DID reported an error",
+ [0x22] = "Enabling UMA",
+ [0x23] = "Enabling UMA error",
+ [0x24] = "Sending DID Ack to BIOS",
+ [0x25] = "Sending DID Ack to BIOS error",
+ [0x26] = "Switching clocks in M0",
+ [0x27] = "Switching clocks in M0 error",
+ [0x28] = "ME in temp disable",
+ [0x32] = "M0 kernel load",
+};
+
+/* Progress Code 3 states */
+static const char *const me_progress_policy_values[] = {
+ [0x00] = "Entery into Policy Module",
+ [0x03] = "Received S3 entry",
+ [0x04] = "Received S4 entry",
+ [0x05] = "Received S5 entry",
+ [0x06] = "Received UPD entry",
+ [0x07] = "Received PCR entry",
+ [0x08] = "Received NPCR entry",
+ [0x09] = "Received host wake",
+ [0x0a] = "Received AC<>DC switch",
+ [0x0b] = "Received DRAM Init Done",
+ [0x0c] = "VSCC Data not found for flash device",
+ [0x0d] = "VSCC Table is not valid",
+ [0x0e] = "Flash Partition Boundary is outside address space",
+ [0x0f] = "ME cannot access the chipset descriptor region",
+ [0x10] = "Required VSCC values for flash parts do not match",
+};
+
+void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes)
+{
+ /* Check Current States */
+ debug("ME: FW Partition Table : %s\n",
+ hfs->fpt_bad ? "BAD" : "OK");
+ debug("ME: Bringup Loader Failure : %s\n",
+ hfs->ft_bup_ld_flr ? "YES" : "NO");
+ debug("ME: Firmware Init Complete : %s\n",
+ hfs->fw_init_complete ? "YES" : "NO");
+ debug("ME: Manufacturing Mode : %s\n",
+ hfs->mfg_mode ? "YES" : "NO");
+ debug("ME: Boot Options Present : %s\n",
+ hfs->boot_options_present ? "YES" : "NO");
+ debug("ME: Update In Progress : %s\n",
+ hfs->update_in_progress ? "YES" : "NO");
+ debug("ME: Current Working State : %s\n",
+ me_cws_values[hfs->working_state]);
+ debug("ME: Current Operation State : %s\n",
+ me_opstate_values[hfs->operation_state]);
+ debug("ME: Current Operation Mode : %s\n",
+ me_opmode_values[hfs->operation_mode]);
+ debug("ME: Error Code : %s\n",
+ me_error_values[hfs->error_code]);
+ debug("ME: Progress Phase : %s\n",
+ me_progress_values[gmes->progress_code]);
+ debug("ME: Power Management Event : %s\n",
+ me_pmevent_values[gmes->current_pmevent]);
+
+ debug("ME: Progress Phase State : ");
+ switch (gmes->progress_code) {
+ case ME_GMES_PHASE_ROM: /* ROM Phase */
+ debug("%s", me_progress_rom_values[gmes->current_state]);
+ break;
+
+ case ME_GMES_PHASE_BUP: /* Bringup Phase */
+ if (gmes->current_state < ARRAY_SIZE(me_progress_bup_values) &&
+ me_progress_bup_values[gmes->current_state])
+ debug("%s",
+ me_progress_bup_values[gmes->current_state]);
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ case ME_GMES_PHASE_POLICY: /* Policy Module Phase */
+ if (gmes->current_state <
+ ARRAY_SIZE(me_progress_policy_values) &&
+ me_progress_policy_values[gmes->current_state])
+ debug("%s",
+ me_progress_policy_values[gmes->current_state]);
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ case ME_GMES_PHASE_HOST: /* Host Communication Phase */
+ if (!gmes->current_state)
+ debug("Host communication established");
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ default:
+ debug("Unknown 0x%02x", gmes->current_state);
+ }
+ debug("\n");
+}
diff --git a/arch/x86/cpu/ivybridge/report_platform.c b/arch/x86/cpu/ivybridge/report_platform.c
new file mode 100644
index 0000000000..69e31b3ca2
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/report_platform.c
@@ -0,0 +1,89 @@
+/*
+ * From Coreboot src/northbridge/intel/sandybridge/report_platform.c
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/cpu.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+
+static void report_cpu_info(void)
+{
+ char cpu_string[CPU_MAX_NAME_LEN], *cpu_name;
+ const char *mode[] = {"NOT ", ""};
+ struct cpuid_result cpuidr;
+ int vt, txt, aes;
+ u32 index;
+
+ index = 0x80000000;
+ cpuidr = cpuid(index);
+ if (cpuidr.eax < 0x80000004) {
+ strcpy(cpu_string, "Platform info not available");
+ cpu_name = cpu_string;
+ } else {
+ cpu_name = cpu_get_name(cpu_string);
+ }
+
+ cpuidr = cpuid(1);
+ debug("CPU id(%x): %s\n", cpuidr.eax, cpu_name);
+ aes = (cpuidr.ecx & (1 << 25)) ? 1 : 0;
+ txt = (cpuidr.ecx & (1 << 6)) ? 1 : 0;
+ vt = (cpuidr.ecx & (1 << 5)) ? 1 : 0;
+ debug("AES %ssupported, TXT %ssupported, VT %ssupported\n",
+ mode[aes], mode[txt], mode[vt]);
+}
+
+/* The PCI id name match comes from Intel document 472178 */
+static struct {
+ u16 dev_id;
+ const char *dev_name;
+} pch_table[] = {
+ {0x1E41, "Desktop Sample"},
+ {0x1E42, "Mobile Sample"},
+ {0x1E43, "SFF Sample"},
+ {0x1E44, "Z77"},
+ {0x1E45, "H71"},
+ {0x1E46, "Z75"},
+ {0x1E47, "Q77"},
+ {0x1E48, "Q75"},
+ {0x1E49, "B75"},
+ {0x1E4A, "H77"},
+ {0x1E53, "C216"},
+ {0x1E55, "QM77"},
+ {0x1E56, "QS77"},
+ {0x1E58, "UM77"},
+ {0x1E57, "HM77"},
+ {0x1E59, "HM76"},
+ {0x1E5D, "HM75"},
+ {0x1E5E, "HM70"},
+ {0x1E5F, "NM70"},
+};
+
+static void report_pch_info(void)
+{
+ const char *pch_type = "Unknown";
+ int i;
+ u16 dev_id;
+ uint8_t rev_id;
+
+ dev_id = pci_read_config16(PCH_LPC_DEV, 2);
+ for (i = 0; i < ARRAY_SIZE(pch_table); i++) {
+ if (pch_table[i].dev_id == dev_id) {
+ pch_type = pch_table[i].dev_name;
+ break;
+ }
+ }
+ rev_id = pci_read_config8(PCH_LPC_DEV, 8);
+ debug("PCH type: %s, device id: %x, rev id %x\n", pch_type, dev_id,
+ rev_id);
+}
+
+void report_platform_info(void)
+{
+ report_cpu_info();
+ report_pch_info();
+}
diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c
index 5f9ae5ecdb..df2b9901fc 100644
--- a/arch/x86/cpu/ivybridge/sdram.c
+++ b/arch/x86/cpu/ivybridge/sdram.c
@@ -11,10 +11,561 @@
*/
#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/global_data.h>
+#include <asm/pci.h>
+#include <asm/arch/me.h>
+#include <asm/arch/pei_data.h>
+#include <asm/arch/pch.h>
+#include <asm/post.h>
+#include <asm/arch/sandybridge.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
+ * It overrides the default implementation found elsewhere which simply
+ * picks the end of ram, wherever that may be. The location of the stack,
+ * the relocation address, and how far U-Boot is moved by relocation are
+ * set in the global data structure.
+ */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ uintptr_t dest_addr = 0;
+ struct memory_area *largest = NULL;
+ int i;
+
+ /* Find largest area of memory below 4GB */
+
+ for (i = 0; i < info->num_areas; i++) {
+ struct memory_area *area = &info->area[i];
+
+ if (area->start >= 1ULL << 32)
+ continue;
+ if (!largest || area->size > largest->size)
+ largest = area;
+ }
+
+ /* If no suitable area was found, return an error. */
+ assert(largest);
+ if (!largest || largest->size < (2 << 20))
+ panic("No available memory found for relocation");
+
+ dest_addr = largest->start + largest->size;
+
+ return (ulong)dest_addr;
+}
+
+void dram_init_banksize(void)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ int num_banks;
+ int i;
+
+ for (i = 0, num_banks = 0; i < info->num_areas; i++) {
+ struct memory_area *area = &info->area[i];
+
+ if (area->start >= 1ULL << 32)
+ continue;
+ gd->bd->bi_dram[num_banks].start = area->start;
+ gd->bd->bi_dram[num_banks].size = area->size;
+ num_banks++;
+ }
+}
+
+static const char *const ecc_decoder[] = {
+ "inactive",
+ "active on IO",
+ "disabled on IO",
+ "active"
+};
+
+/*
+ * Dump in the log memory controller configuration as read from the memory
+ * controller registers.
+ */
+static void report_memory_config(void)
+{
+ u32 addr_decoder_common, addr_decode_ch[2];
+ int i;
+
+ addr_decoder_common = readl(MCHBAR_REG(0x5000));
+ addr_decode_ch[0] = readl(MCHBAR_REG(0x5004));
+ addr_decode_ch[1] = readl(MCHBAR_REG(0x5008));
+
+ debug("memcfg DDR3 clock %d MHz\n",
+ (readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100);
+ debug("memcfg channel assignment: A: %d, B % d, C % d\n",
+ addr_decoder_common & 3,
+ (addr_decoder_common >> 2) & 3,
+ (addr_decoder_common >> 4) & 3);
+
+ for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) {
+ u32 ch_conf = addr_decode_ch[i];
+ debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf);
+ debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]);
+ debug(" enhanced interleave mode %s\n",
+ ((ch_conf >> 22) & 1) ? "on" : "off");
+ debug(" rank interleave %s\n",
+ ((ch_conf >> 21) & 1) ? "on" : "off");
+ debug(" DIMMA %d MB width x%d %s rank%s\n",
+ ((ch_conf >> 0) & 0xff) * 256,
+ ((ch_conf >> 19) & 1) ? 16 : 8,
+ ((ch_conf >> 17) & 1) ? "dual" : "single",
+ ((ch_conf >> 16) & 1) ? "" : ", selected");
+ debug(" DIMMB %d MB width x%d %s rank%s\n",
+ ((ch_conf >> 8) & 0xff) * 256,
+ ((ch_conf >> 20) & 1) ? 16 : 8,
+ ((ch_conf >> 18) & 1) ? "dual" : "single",
+ ((ch_conf >> 16) & 1) ? ", selected" : "");
+ }
+}
+
+static void post_system_agent_init(struct pei_data *pei_data)
+{
+ /* If PCIe init is skipped, set the PEG clock gating */
+ if (!pei_data->pcie_init)
+ setbits_le32(MCHBAR_REG(0x7010), 1);
+}
+
+static asmlinkage void console_tx_byte(unsigned char byte)
+{
+#ifdef DEBUG
+ putc(byte);
+#endif
+}
+
+/**
+ * Find the PEI executable in the ROM and execute it.
+ *
+ * @param pei_data: configuration data for UEFI PEI reference code
+ */
+int sdram_initialise(struct pei_data *pei_data)
+{
+ unsigned version;
+ const char *data;
+ uint16_t done;
+ int ret;
+
+ report_platform_info();
+
+ /* Wait for ME to be ready */
+ ret = intel_early_me_init();
+ if (ret)
+ return ret;
+ ret = intel_early_me_uma_size();
+ if (ret < 0)
+ return ret;
+
+ debug("Starting UEFI PEI System Agent\n");
+
+ /* If MRC data is not found we cannot continue S3 resume. */
+ if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) {
+ debug("Giving up in sdram_initialize: No MRC data\n");
+ outb(0x6, PORT_RESET);
+ cpu_hlt();
+ }
+
+ /* Pass console handler in pei_data */
+ pei_data->tx_byte = console_tx_byte;
+
+ debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data));
+
+ data = (char *)CONFIG_X86_MRC_START;
+ if (data) {
+ int rv;
+ int (*func)(struct pei_data *);
+
+ debug("Calling MRC at %p\n", data);
+ post_code(POST_PRE_MRC);
+ func = (int (*)(struct pei_data *))data;
+ rv = func(pei_data);
+ post_code(POST_MRC);
+ if (rv) {
+ switch (rv) {
+ case -1:
+ printf("PEI version mismatch.\n");
+ break;
+ case -2:
+ printf("Invalid memory frequency.\n");
+ break;
+ default:
+ printf("MRC returned %x.\n", rv);
+ }
+ printf("Nonzero MRC return value.\n");
+ return -EFAULT;
+ }
+ } else {
+ printf("UEFI PEI System Agent not found.\n");
+ return -ENOSYS;
+ }
+
+#if CONFIG_USBDEBUG
+ /* mrc.bin reconfigures USB, so reinit it to have debug */
+ early_usbdebug_init();
+#endif
+
+ version = readl(MCHBAR_REG(0x5034));
+ debug("System Agent Version %d.%d.%d Build %d\n",
+ version >> 24 , (version >> 16) & 0xff,
+ (version >> 8) & 0xff, version & 0xff);
+
+ /*
+ * Send ME init done for SandyBridge here. This is done inside the
+ * SystemAgent binary on IvyBridge
+ */
+ done = pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
+ done &= BASE_REV_MASK;
+ if (BASE_REV_SNB == done)
+ intel_early_me_init_done(ME_INIT_STATUS_SUCCESS);
+ else
+ intel_early_me_status();
+
+ post_system_agent_init(pei_data);
+ report_memory_config();
+
+ return 0;
+}
+
+static int copy_spd(struct pei_data *peid)
+{
+ const int gpio_vector[] = {41, 42, 43, 10, -1};
+ int spd_index;
+ const void *blob = gd->fdt_blob;
+ int node, spd_node;
+ int ret, i;
+
+ for (i = 0; ; i++) {
+ if (gpio_vector[i] == -1)
+ break;
+ ret = gpio_requestf(gpio_vector[i], "spd_id%d", i);
+ if (ret) {
+ debug("%s: Could not request gpio %d\n", __func__,
+ gpio_vector[i]);
+ return ret;
+ }
+ }
+ spd_index = gpio_get_values_as_int(gpio_vector);
+ debug("spd index %d\n", spd_index);
+ node = fdtdec_next_compatible(blob, 0, COMPAT_MEMORY_SPD);
+ if (node < 0) {
+ printf("SPD data not found.\n");
+ return -ENOENT;
+ }
+
+ for (spd_node = fdt_first_subnode(blob, node);
+ spd_node > 0;
+ spd_node = fdt_next_subnode(blob, spd_node)) {
+ const char *data;
+ int len;
+
+ if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index)
+ continue;
+ data = fdt_getprop(blob, spd_node, "data", &len);
+ if (len < sizeof(peid->spd_data[0])) {
+ printf("Missing SPD data\n");
+ return -EINVAL;
+ }
+
+ debug("Using SDRAM SPD data for '%s'\n",
+ fdt_get_name(blob, spd_node, NULL));
+ memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0]));
+ break;
+ }
+
+ if (spd_node < 0) {
+ printf("No SPD data found for index %d\n", spd_index);
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+/**
+ * add_memory_area() - Add a new usable memory area to our list
+ *
+ * Note: @start and @end must not span the first 4GB boundary
+ *
+ * @info: Place to store memory info
+ * @start: Start of this memory area
+ * @end: End of this memory area + 1
+ */
+static int add_memory_area(struct memory_info *info,
+ uint64_t start, uint64_t end)
+{
+ struct memory_area *ptr;
+
+ if (info->num_areas == CONFIG_NR_DRAM_BANKS)
+ return -ENOSPC;
+
+ ptr = &info->area[info->num_areas];
+ ptr->start = start;
+ ptr->size = end - start;
+ info->total_memory += ptr->size;
+ if (ptr->start < (1ULL << 32))
+ info->total_32bit_memory += ptr->size;
+ debug("%d: memory %llx size %llx, total now %llx / %llx\n",
+ info->num_areas, ptr->start, ptr->size,
+ info->total_32bit_memory, info->total_memory);
+ info->num_areas++;
+
+ return 0;
+}
+
+/**
+ * sdram_find() - Find available memory
+ *
+ * This is a bit complicated since on x86 there are system memory holes all
+ * over the place. We create a list of available memory blocks
+ */
+static int sdram_find(pci_dev_t dev)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ uint32_t tseg_base, uma_size, tolud;
+ uint64_t tom, me_base, touud;
+ uint64_t uma_memory_base = 0;
+ uint64_t uma_memory_size;
+ unsigned long long tomk;
+ uint16_t ggc;
+
+ /* Total Memory 2GB example:
+ *
+ * 00000000 0000MB-1992MB 1992MB RAM (writeback)
+ * 7c800000 1992MB-2000MB 8MB TSEG (SMRR)
+ * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached)
+ * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached)
+ * 7f200000 2034MB TOLUD
+ * 7f800000 2040MB MEBASE
+ * 7f800000 2040MB-2048MB 8MB ME UMA (uncached)
+ * 80000000 2048MB TOM
+ * 100000000 4096MB-4102MB 6MB RAM (writeback)
+ *
+ * Total Memory 4GB example:
+ *
+ * 00000000 0000MB-2768MB 2768MB RAM (writeback)
+ * ad000000 2768MB-2776MB 8MB TSEG (SMRR)
+ * ad800000 2776MB-2778MB 2MB GFX GTT (uncached)
+ * ada00000 2778MB-2810MB 32MB GFX UMA (uncached)
+ * afa00000 2810MB TOLUD
+ * ff800000 4088MB MEBASE
+ * ff800000 4088MB-4096MB 8MB ME UMA (uncached)
+ * 100000000 4096MB TOM
+ * 100000000 4096MB-5374MB 1278MB RAM (writeback)
+ * 14fe00000 5368MB TOUUD
+ */
+
+ /* Top of Upper Usable DRAM, including remap */
+ touud = pci_read_config32(dev, TOUUD+4);
+ touud <<= 32;
+ touud |= pci_read_config32(dev, TOUUD);
+
+ /* Top of Lower Usable DRAM */
+ tolud = pci_read_config32(dev, TOLUD);
+
+ /* Top of Memory - does not account for any UMA */
+ tom = pci_read_config32(dev, 0xa4);
+ tom <<= 32;
+ tom |= pci_read_config32(dev, 0xa0);
+
+ debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
+
+ /* ME UMA needs excluding if total memory <4GB */
+ me_base = pci_read_config32(dev, 0x74);
+ me_base <<= 32;
+ me_base |= pci_read_config32(dev, 0x70);
+
+ debug("MEBASE %llx\n", me_base);
+
+ /* TODO: Get rid of all this shifting by 10 bits */
+ tomk = tolud >> 10;
+ if (me_base == tolud) {
+ /* ME is from MEBASE-TOM */
+ uma_size = (tom - me_base) >> 10;
+ /* Increment TOLUD to account for ME as RAM */
+ tolud += uma_size << 10;
+ /* UMA starts at old TOLUD */
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size = uma_size * 1024ULL;
+ debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10);
+ }
+
+ /* Graphics memory comes next */
+ ggc = pci_read_config16(dev, GGC);
+ if (!(ggc & 2)) {
+ debug("IGD decoded, subtracting ");
+
+ /* Graphics memory */
+ uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL;
+ debug("%uM UMA", uma_size >> 10);
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+
+ /* GTT Graphics Stolen Memory Size (GGMS) */
+ uma_size = ((ggc >> 8) & 0x3) * 1024ULL;
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+ debug(" and %uM GTT\n", uma_size >> 10);
+ }
+
+ /* Calculate TSEG size from its base which must be below GTT */
+ tseg_base = pci_read_config32(dev, 0xb8);
+ uma_size = (uma_memory_base - tseg_base) >> 10;
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+ debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10);
+
+ debug("Available memory below 4GB: %lluM\n", tomk >> 10);
+
+ /* Report the memory regions */
+ add_memory_area(info, 1 << 20, 2 << 28);
+ add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28);
+ add_memory_area(info, (4 << 28) + (2 << 20), tseg_base);
+ add_memory_area(info, 1ULL << 32, touud);
+ /*
+ * If >= 4GB installed then memory from TOLUD to 4GB
+ * is remapped above TOM, TOUUD will account for both
+ */
+ if (touud > (1ULL << 32ULL)) {
+ debug("Available memory above 4GB: %lluM\n",
+ (touud >> 20) - 4096);
+ }
+
+ return 0;
+}
+
+static void rcba_config(void)
+{
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P3IP WLAN INTA -> PIRQB
+ * D29IP_E1P EHCI1 INTA -> PIRQD
+ * D26IP_E2P EHCI2 INTA -> PIRQF
+ * D31IP_SIP SATA INTA -> PIRQF (MSI)
+ * D31IP_SMIP SMBUS INTB -> PIRQH
+ * D31IP_TTIP THRT INTC -> PIRQA
+ * D27IP_ZIP HDA INTA -> PIRQA (MSI)
+ *
+ * TRACKPAD -> PIRQE (Edge Triggered)
+ * TOUCHSCREEN -> PIRQG (Edge Triggered)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP));
+ writel(NOINT << D30IP_PIP, RCB_REG(D30IP));
+ writel(INTA << D29IP_E1P, RCB_REG(D29IP));
+ writel(INTA << D28IP_P3IP, RCB_REG(D28IP));
+ writel(INTA << D27IP_ZIP, RCB_REG(D27IP));
+ writel(INTA << D26IP_E2P, RCB_REG(D26IP));
+ writel(NOINT << D25IP_LIP, RCB_REG(D25IP));
+ writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP));
+
+ /* Device interrupt route registers */
+ writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR));
+ writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR));
+ writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR));
+ writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR));
+ writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR));
+ writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR));
+ writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR));
+
+ /* Enable IOAPIC (generic) */
+ writew(0x0100, RCB_REG(OIC));
+ /* PCH BWG says to read back the IOAPIC enable register */
+ (void)readw(RCB_REG(OIC));
+
+ /* Disable unused devices (board specific) */
+ setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
+}
int dram_init(void)
{
- /* TODO: Set up DRAM */
+ struct pei_data pei_data __aligned(8) = {
+ .pei_version = PEI_VERSION,
+ .mchbar = DEFAULT_MCHBAR,
+ .dmibar = DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = CONFIG_HPET_ADDRESS,
+ .rcba = DEFAULT_RCBABASE,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .thermalbase = 0xfed08000,
+ .system_type = 0, /* 0 Mobile, 1 Desktop/Server */
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
+ .ec_present = 1,
+ .ddr3lv_support = 1,
+ /*
+ * 0 = leave channel enabled
+ * 1 = disable dimm 0 on channel
+ * 2 = disable dimm 1 on channel
+ * 3 = disable dimm 0+1 on channel
+ */
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ .max_ddr3_freq = 1600,
+ .usb_port_config = {
+ /*
+ * Empty and onboard Ports 0-7, set to un-used pin
+ * OC3
+ */
+ { 0, 3, 0x0000 }, /* P0= Empty */
+ { 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */
+ { 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */
+ { 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */
+ { 0, 3, 0x0000 }, /* P4= Empty */
+ { 1, 3, 0x0040 }, /* P5= WWAN (no OC) */
+ { 0, 3, 0x0000 }, /* P6= Empty */
+ { 0, 3, 0x0000 }, /* P7= Empty */
+ /*
+ * Empty and onboard Ports 8-13, set to un-used pin
+ * OC4
+ */
+ { 1, 4, 0x0040 }, /* P8= Camera (no OC) */
+ { 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */
+ { 0, 4, 0x0000 }, /* P10= Empty */
+ { 0, 4, 0x0000 }, /* P11= Empty */
+ { 0, 4, 0x0000 }, /* P12= Empty */
+ { 0, 4, 0x0000 }, /* P13= Empty */
+ },
+ };
+ pci_dev_t dev = PCI_BDF(0, 0, 0);
+ int ret;
+
+ debug("Boot mode %d\n", gd->arch.pei_boot_mode);
+ debug("mcr_input %p\n", pei_data.mrc_input);
+ pei_data.boot_mode = gd->arch.pei_boot_mode;
+ ret = copy_spd(&pei_data);
+ if (!ret)
+ ret = sdram_initialise(&pei_data);
+ if (ret)
+ return ret;
+
+ rcba_config();
+ quick_ram_check();
+
+ writew(0xCAFE, MCHBAR_REG(SSKPD));
+
+ post_code(POST_DRAM);
+
+ ret = sdram_find(dev);
+ if (ret)
+ return ret;
+
+ gd->ram_size = gd->arch.meminfo.total_32bit_memory;
return 0;
}
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index 1b738f9916..b0d0ac0610 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -78,20 +78,22 @@ car_init_ret:
* We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
* or fully initialised SDRAM - we really don't care which)
* starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
- * and early malloc area.
+ * and early malloc area. The MRC requires some space at the top.
*
* Stack grows down from top of CAR. We have:
*
* top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
+ * MRC area
* global_data
* x86 global descriptor table
* early malloc area
* stack
* bottom-> CONFIG_SYS_CAR_ADDR
*/
-
- /* Stack grows down from top of CAR */
- movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE), %esp
+ movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
+#ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
+ subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
+#endif
/* Reserve space on stack for global data */
subl $GENERATED_GBL_DATA_SIZE, %esp
diff --git a/arch/x86/dts/link.dts b/arch/x86/dts/link.dts
index 74b21985f5..932991604f 100644
--- a/arch/x86/dts/link.dts
+++ b/arch/x86/dts/link.dts
@@ -41,6 +41,117 @@
chosen { };
memory { device_type = "memory"; reg = <0 0>; };
+ spd {
+ compatible = "memory-spd";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ elpida_4Gb_1600_x16 {
+ reg = <0>;
+ data = [92 10 0b 03 04 19 02 02
+ 03 52 01 08 0a 00 fe 00
+ 69 78 69 3c 69 11 18 81
+ 20 08 3c 3c 01 40 83 81
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 0f 11 42 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 02 fe 00
+ 11 52 00 00 00 07 7f 37
+ 45 42 4a 32 30 55 47 36
+ 45 42 55 30 2d 47 4e 2d
+ 46 20 30 20 02 fe 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00];
+ };
+ samsung_4Gb_1600_1.35v_x16 {
+ reg = <1>;
+ data = [92 11 0b 03 04 19 02 02
+ 03 11 01 08 0a 00 fe 00
+ 69 78 69 3c 69 11 18 81
+ f0 0a 3c 3c 01 40 83 01
+ 00 80 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 0f 11 02 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 80 ce 01
+ 00 00 00 00 00 00 6a 04
+ 4d 34 37 31 42 35 36 37
+ 34 42 48 30 2d 59 4b 30
+ 20 20 00 00 80 ce 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00];
+ };
+ micron_4Gb_1600_1.35v_x16 {
+ reg = <2>;
+ data = [92 11 0b 03 04 19 02 02
+ 03 11 01 08 0a 00 fe 00
+ 69 78 69 3c 69 11 18 81
+ 20 08 3c 3c 01 40 83 05
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 0f 01 02 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 80 2c 00
+ 00 00 00 00 00 00 ad 75
+ 34 4b 54 46 32 35 36 36
+ 34 48 5a 2d 31 47 36 45
+ 31 20 45 31 80 2c 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff
+ ff ff ff ff ff ff ff ff];
+ };
+ };
+
spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/x86/include/asm/arch-ivybridge/me.h b/arch/x86/include/asm/arch-ivybridge/me.h
new file mode 100644
index 0000000000..3a0809d6ec
--- /dev/null
+++ b/arch/x86/include/asm/arch-ivybridge/me.h
@@ -0,0 +1,356 @@
+/*
+ * From Coreboot src/southbridge/intel/bd82x6x/me.h
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ASM_INTEL_ME_H
+#define _ASM_INTEL_ME_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#define ME_RETRY 100000 /* 1 second */
+#define ME_DELAY 10 /* 10 us */
+
+/*
+ * Management Engine PCI registers
+ */
+
+#define PCI_CPU_MEBASE_L 0x70 /* Set by MRC */
+#define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */
+
+#define PCI_ME_HFS 0x40
+#define ME_HFS_CWS_RESET 0
+#define ME_HFS_CWS_INIT 1
+#define ME_HFS_CWS_REC 2
+#define ME_HFS_CWS_NORMAL 5
+#define ME_HFS_CWS_WAIT 6
+#define ME_HFS_CWS_TRANS 7
+#define ME_HFS_CWS_INVALID 8
+#define ME_HFS_STATE_PREBOOT 0
+#define ME_HFS_STATE_M0_UMA 1
+#define ME_HFS_STATE_M3 4
+#define ME_HFS_STATE_M0 5
+#define ME_HFS_STATE_BRINGUP 6
+#define ME_HFS_STATE_ERROR 7
+#define ME_HFS_ERROR_NONE 0
+#define ME_HFS_ERROR_UNCAT 1
+#define ME_HFS_ERROR_IMAGE 3
+#define ME_HFS_ERROR_DEBUG 4
+#define ME_HFS_MODE_NORMAL 0
+#define ME_HFS_MODE_DEBUG 2
+#define ME_HFS_MODE_DIS 3
+#define ME_HFS_MODE_OVER_JMPR 4
+#define ME_HFS_MODE_OVER_MEI 5
+#define ME_HFS_BIOS_DRAM_ACK 1
+#define ME_HFS_ACK_NO_DID 0
+#define ME_HFS_ACK_RESET 1
+#define ME_HFS_ACK_PWR_CYCLE 2
+#define ME_HFS_ACK_S3 3
+#define ME_HFS_ACK_S4 4
+#define ME_HFS_ACK_S5 5
+#define ME_HFS_ACK_GBL_RESET 6
+#define ME_HFS_ACK_CONTINUE 7
+
+struct me_hfs {
+ u32 working_state:4;
+ u32 mfg_mode:1;
+ u32 fpt_bad:1;
+ u32 operation_state:3;
+ u32 fw_init_complete:1;
+ u32 ft_bup_ld_flr:1;
+ u32 update_in_progress:1;
+ u32 error_code:4;
+ u32 operation_mode:4;
+ u32 reserved:4;
+ u32 boot_options_present:1;
+ u32 ack_data:3;
+ u32 bios_msg_ack:4;
+} __packed;
+
+#define PCI_ME_UMA 0x44
+
+struct me_uma {
+ u32 size:6;
+ u32 reserved_1:10;
+ u32 valid:1;
+ u32 reserved_0:14;
+ u32 set_to_one:1;
+} __packed;
+
+#define PCI_ME_H_GS 0x4c
+#define ME_INIT_DONE 1
+#define ME_INIT_STATUS_SUCCESS 0
+#define ME_INIT_STATUS_NOMEM 1
+#define ME_INIT_STATUS_ERROR 2
+
+struct me_did {
+ u32 uma_base:16;
+ u32 reserved:8;
+ u32 status:4;
+ u32 init_done:4;
+} __packed;
+
+#define PCI_ME_GMES 0x48
+#define ME_GMES_PHASE_ROM 0
+#define ME_GMES_PHASE_BUP 1
+#define ME_GMES_PHASE_UKERNEL 2
+#define ME_GMES_PHASE_POLICY 3
+#define ME_GMES_PHASE_MODULE 4
+#define ME_GMES_PHASE_UNKNOWN 5
+#define ME_GMES_PHASE_HOST 6
+
+struct me_gmes {
+ u32 bist_in_prog:1;
+ u32 icc_prog_sts:2;
+ u32 invoke_mebx:1;
+ u32 cpu_replaced_sts:1;
+ u32 mbp_rdy:1;
+ u32 mfs_failure:1;
+ u32 warm_rst_req_for_df:1;
+ u32 cpu_replaced_valid:1;
+ u32 reserved_1:2;
+ u32 fw_upd_ipu:1;
+ u32 reserved_2:4;
+ u32 current_state:8;
+ u32 current_pmevent:4;
+ u32 progress_code:4;
+} __packed;
+
+#define PCI_ME_HERES 0xbc
+#define PCI_ME_EXT_SHA1 0x00
+#define PCI_ME_EXT_SHA256 0x02
+#define PCI_ME_HER(x) (0xc0+(4*(x)))
+
+struct me_heres {
+ u32 extend_reg_algorithm:4;
+ u32 reserved:26;
+ u32 extend_feature_present:1;
+ u32 extend_reg_valid:1;
+} __packed;
+
+/*
+ * Management Engine MEI registers
+ */
+
+#define MEI_H_CB_WW 0x00
+#define MEI_H_CSR 0x04
+#define MEI_ME_CB_RW 0x08
+#define MEI_ME_CSR_HA 0x0c
+
+struct mei_csr {
+ u32 interrupt_enable:1;
+ u32 interrupt_status:1;
+ u32 interrupt_generate:1;
+ u32 ready:1;
+ u32 reset:1;
+ u32 reserved:3;
+ u32 buffer_read_ptr:8;
+ u32 buffer_write_ptr:8;
+ u32 buffer_depth:8;
+} __packed;
+
+#define MEI_ADDRESS_CORE 0x01
+#define MEI_ADDRESS_AMT 0x02
+#define MEI_ADDRESS_RESERVED 0x03
+#define MEI_ADDRESS_WDT 0x04
+#define MEI_ADDRESS_MKHI 0x07
+#define MEI_ADDRESS_ICC 0x08
+#define MEI_ADDRESS_THERMAL 0x09
+
+#define MEI_HOST_ADDRESS 0
+
+struct mei_header {
+ u32 client_address:8;
+ u32 host_address:8;
+ u32 length:9;
+ u32 reserved:6;
+ u32 is_complete:1;
+} __packed;
+
+#define MKHI_GROUP_ID_CBM 0x00
+#define MKHI_GROUP_ID_FWCAPS 0x03
+#define MKHI_GROUP_ID_MDES 0x08
+#define MKHI_GROUP_ID_GEN 0xff
+
+#define MKHI_GLOBAL_RESET 0x0b
+
+#define MKHI_FWCAPS_GET_RULE 0x02
+
+#define MKHI_MDES_ENABLE 0x09
+
+#define MKHI_GET_FW_VERSION 0x02
+#define MKHI_END_OF_POST 0x0c
+#define MKHI_FEATURE_OVERRIDE 0x14
+
+struct mkhi_header {
+ u32 group_id:8;
+ u32 command:7;
+ u32 is_response:1;
+ u32 reserved:8;
+ u32 result:8;
+} __packed;
+
+struct me_fw_version {
+ u16 code_minor;
+ u16 code_major;
+ u16 code_build_number;
+ u16 code_hot_fix;
+ u16 recovery_minor;
+ u16 recovery_major;
+ u16 recovery_build_number;
+ u16 recovery_hot_fix;
+} __packed;
+
+
+#define HECI_EOP_STATUS_SUCCESS 0x0
+#define HECI_EOP_PERFORM_GLOBAL_RESET 0x1
+
+#define CBM_RR_GLOBAL_RESET 0x01
+
+#define GLOBAL_RESET_BIOS_MRC 0x01
+#define GLOBAL_RESET_BIOS_POST 0x02
+#define GLOBAL_RESET_MEBX 0x03
+
+struct me_global_reset {
+ u8 request_origin;
+ u8 reset_type;
+} __packed;
+
+enum me_bios_path {
+ ME_NORMAL_BIOS_PATH,
+ ME_S3WAKE_BIOS_PATH,
+ ME_ERROR_BIOS_PATH,
+ ME_RECOVERY_BIOS_PATH,
+ ME_DISABLE_BIOS_PATH,
+ ME_FIRMWARE_UPDATE_BIOS_PATH,
+};
+
+struct __packed mbp_fw_version_name {
+ u32 major_version:16;
+ u32 minor_version:16;
+ u32 hotfix_version:16;
+ u32 build_version:16;
+};
+
+struct __packed mbp_icc_profile {
+ u8 num_icc_profiles;
+ u8 icc_profile_soft_strap;
+ u8 icc_profile_index;
+ u8 reserved;
+ u32 register_lock_mask[3];
+};
+
+struct __packed mefwcaps_sku {
+ u32 full_net:1;
+ u32 std_net:1;
+ u32 manageability:1;
+ u32 small_business:1;
+ u32 l3manageability:1;
+ u32 intel_at:1;
+ u32 intel_cls:1;
+ u32 reserved:3;
+ u32 intel_mpc:1;
+ u32 icc_over_clocking:1;
+ u32 pavp:1;
+ u32 reserved_1:4;
+ u32 ipv6:1;
+ u32 kvm:1;
+ u32 och:1;
+ u32 vlan:1;
+ u32 tls:1;
+ u32 reserved_4:1;
+ u32 wlan:1;
+ u32 reserved_5:8;
+};
+
+struct __packed tdt_state_flag {
+ u16 lock_state:1;
+ u16 authenticate_module:1;
+ u16 s3authentication:1;
+ u16 flash_wear_out:1;
+ u16 flash_variable_security:1;
+ u16 wwan3gpresent:1;
+ u16 wwan3goob:1;
+ u16 reserved:9;
+};
+
+struct __packed tdt_state_info {
+ u8 state;
+ u8 last_theft_trigger;
+ struct tdt_state_flag flags;
+};
+
+struct __packed platform_type_rule_data {
+ u32 platform_target_usage_type:4;
+ u32 platform_target_market_type:2;
+ u32 super_sku:1;
+ u32 reserved:1;
+ u32 intel_me_fw_image_type:4;
+ u32 platform_brand:4;
+ u32 reserved_1:16;
+};
+
+struct __packed mbp_fw_caps {
+ struct mefwcaps_sku fw_capabilities;
+ u8 available;
+};
+
+struct __packed mbp_rom_bist_data {
+ u16 device_id;
+ u16 fuse_test_flags;
+ u32 umchid[4];
+};
+
+struct __packed mbp_platform_key {
+ u32 key[8];
+};
+
+struct __packed mbp_plat_type {
+ struct platform_type_rule_data rule_data;
+ u8 available;
+};
+
+struct __packed me_bios_payload {
+ struct mbp_fw_version_name fw_version_name;
+ struct mbp_fw_caps fw_caps_sku;
+ struct mbp_rom_bist_data rom_bist_data;
+ struct mbp_platform_key platform_key;
+ struct mbp_plat_type fw_plat_type;
+ struct mbp_icc_profile icc_profile;
+ struct tdt_state_info at_state;
+ u32 mfsintegrity;
+};
+
+struct __packed mbp_header {
+ u32 mbp_size:8;
+ u32 num_entries:8;
+ u32 rsvd:16;
+};
+
+struct __packed mbp_item_header {
+ u32 app_id:8;
+ u32 item_id:8;
+ u32 length:8;
+ u32 rsvd:8;
+};
+
+struct __packed me_fwcaps {
+ u32 id;
+ u8 length;
+ struct mefwcaps_sku caps_sku;
+ u8 reserved[3];
+};
+
+/* Defined in me_status.c for both romstage and ramstage */
+void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes);
+
+void intel_early_me_status(void);
+int intel_early_me_init(void);
+int intel_early_me_uma_size(void);
+int intel_early_me_init_done(u8 status);
+
+#endif
diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h
index ae338e3d92..c6efdb8565 100644
--- a/arch/x86/include/asm/arch-ivybridge/pch.h
+++ b/arch/x86/include/asm/arch-ivybridge/pch.h
@@ -31,6 +31,13 @@
/* PCI Configuration Space (D31:F0): LPC */
#define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0)
+#define GEN_PMCON_1 0xa0
+#define GEN_PMCON_2 0xa2
+#define GEN_PMCON_3 0xa4
+#define ETR3 0xac
+#define ETR3_CWORWRE (1 << 18)
+#define ETR3_CF9GR (1 << 20)
+
#define PMBASE 0x40
#define ACPI_CNTL 0x44
#define BIOS_CNTL 0xDC
@@ -126,12 +133,97 @@
#define RPC 0x0400 /* 32bit */
#define RPFN 0x0404 /* 32bit */
+#define TRSR 0x1e00 /* 8bit */
+#define TRCR 0x1e10 /* 64bit */
+#define TWDR 0x1e18 /* 64bit */
+
+#define IOTR0 0x1e80 /* 64bit */
+#define IOTR1 0x1e88 /* 64bit */
+#define IOTR2 0x1e90 /* 64bit */
+#define IOTR3 0x1e98 /* 64bit */
+
+#define TCTL 0x3000 /* 8bit */
+
+#define NOINT 0
+#define INTA 1
+#define INTB 2
+#define INTC 3
+#define INTD 4
+
+#define DIR_IDR 12 /* Interrupt D Pin Offset */
+#define DIR_ICR 8 /* Interrupt C Pin Offset */
+#define DIR_IBR 4 /* Interrupt B Pin Offset */
+#define DIR_IAR 0 /* Interrupt A Pin Offset */
+
+#define PIRQA 0
+#define PIRQB 1
+#define PIRQC 2
+#define PIRQD 3
+#define PIRQE 4
+#define PIRQF 5
+#define PIRQG 6
+#define PIRQH 7
+
+/* IO Buffer Programming */
+#define IOBPIRI 0x2330
+#define IOBPD 0x2334
+#define IOBPS 0x2338
+#define IOBPS_RW_BX ((1 << 9)|(1 << 10))
+#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10))
+#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10))
+
+#define D31IP 0x3100 /* 32bit */
+#define D31IP_TTIP 24 /* Thermal Throttle Pin */
+#define D31IP_SIP2 20 /* SATA Pin 2 */
+#define D31IP_SMIP 12 /* SMBUS Pin */
+#define D31IP_SIP 8 /* SATA Pin */
+#define D30IP 0x3104 /* 32bit */
+#define D30IP_PIP 0 /* PCI Bridge Pin */
+#define D29IP 0x3108 /* 32bit */
+#define D29IP_E1P 0 /* EHCI #1 Pin */
+#define D28IP 0x310c /* 32bit */
+#define D28IP_P8IP 28 /* PCI Express Port 8 */
+#define D28IP_P7IP 24 /* PCI Express Port 7 */
+#define D28IP_P6IP 20 /* PCI Express Port 6 */
+#define D28IP_P5IP 16 /* PCI Express Port 5 */
+#define D28IP_P4IP 12 /* PCI Express Port 4 */
+#define D28IP_P3IP 8 /* PCI Express Port 3 */
+#define D28IP_P2IP 4 /* PCI Express Port 2 */
+#define D28IP_P1IP 0 /* PCI Express Port 1 */
+#define D27IP 0x3110 /* 32bit */
+#define D27IP_ZIP 0 /* HD Audio Pin */
+#define D26IP 0x3114 /* 32bit */
+#define D26IP_E2P 0 /* EHCI #2 Pin */
+#define D25IP 0x3118 /* 32bit */
+#define D25IP_LIP 0 /* GbE LAN Pin */
+#define D22IP 0x3124 /* 32bit */
+#define D22IP_KTIP 12 /* KT Pin */
+#define D22IP_IDERIP 8 /* IDE-R Pin */
+#define D22IP_MEI2IP 4 /* MEI #2 Pin */
+#define D22IP_MEI1IP 0 /* MEI #1 Pin */
+#define D20IP 0x3128 /* 32bit */
+#define D20IP_XHCIIP 0
+#define D31IR 0x3140 /* 16bit */
+#define D30IR 0x3142 /* 16bit */
+#define D29IR 0x3144 /* 16bit */
+#define D28IR 0x3146 /* 16bit */
+#define D27IR 0x3148 /* 16bit */
+#define D26IR 0x314c /* 16bit */
+#define D25IR 0x3150 /* 16bit */
+#define D22IR 0x315c /* 16bit */
+#define D20IR 0x3160 /* 16bit */
+#define OIC 0x31fe /* 16bit */
+
#define SPI_FREQ_SWSEQ 0x3893
#define SPI_DESC_COMP0 0x38b0
#define SPI_FREQ_WR_ERA 0x38b4
#define SOFT_RESET_CTRL 0x38f4
#define SOFT_RESET_DATA 0x38f8
+#define DIR_ROUTE(a, b, c, d) \
+ (((d) << DIR_IDR) | ((c) << DIR_ICR) | \
+ ((b) << DIR_IBR) | ((a) << DIR_IAR))
+
#define RC 0x3400 /* 32bit */
#define HPTC 0x3404 /* 32bit */
#define GCS 0x3410 /* 32bit */
@@ -142,6 +234,27 @@
#define FD2 0x3428 /* 32bit */
#define CG 0x341c /* 32bit */
+/* Function Disable 1 RCBA 0x3418 */
+#define PCH_DISABLE_ALWAYS ((1 << 0)|(1 << 26))
+#define PCH_DISABLE_P2P (1 << 1)
+#define PCH_DISABLE_SATA1 (1 << 2)
+#define PCH_DISABLE_SMBUS (1 << 3)
+#define PCH_DISABLE_HD_AUDIO (1 << 4)
+#define PCH_DISABLE_EHCI2 (1 << 13)
+#define PCH_DISABLE_LPC (1 << 14)
+#define PCH_DISABLE_EHCI1 (1 << 15)
+#define PCH_DISABLE_PCIE(x) (1 << (16 + x))
+#define PCH_DISABLE_THERMAL (1 << 24)
+#define PCH_DISABLE_SATA2 (1 << 25)
+#define PCH_DISABLE_XHCI (1 << 27)
+
+/* Function Disable 2 RCBA 0x3428 */
+#define PCH_DISABLE_KT (1 << 4)
+#define PCH_DISABLE_IDER (1 << 3)
+#define PCH_DISABLE_MEI2 (1 << 2)
+#define PCH_DISABLE_MEI1 (1 << 1)
+#define PCH_ENABLE_DBDF (1 << 0)
+
/* ICH7 GPIOBASE */
#define GPIO_USE_SEL 0x00
#define GP_IO_SEL 0x04
diff --git a/arch/x86/include/asm/arch-ivybridge/pei_data.h b/arch/x86/include/asm/arch-ivybridge/pei_data.h
new file mode 100644
index 0000000000..5026c8bab3
--- /dev/null
+++ b/arch/x86/include/asm/arch-ivybridge/pei_data.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2011, Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef ASM_ARCH_PEI_DATA_H
+#define ASM_ARCH_PEI_DATA_H
+
+struct pch_usb3_controller_settings {
+ /* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
+ uint16_t mode;
+ /* 4 bit mask, 1: switchable, 0: not switchable */
+ uint16_t hs_port_switch_mask;
+ /* 0: No xHCI preOS driver, 1: xHCI preOS driver */
+ uint16_t preboot_support;
+ /* 0: Disable, 1: Enable */
+ uint16_t xhci_streams;
+};
+
+typedef asmlinkage void (*tx_byte_func)(unsigned char byte);
+
+#define PEI_VERSION 6
+
+struct __packed pei_data {
+ uint32_t pei_version;
+ uint32_t mchbar;
+ uint32_t dmibar;
+ uint32_t epbar;
+ uint32_t pciexbar;
+ uint16_t smbusbar;
+ uint32_t wdbbar;
+ uint32_t wdbsize;
+ uint32_t hpet_address;
+ uint32_t rcba;
+ uint32_t pmbase;
+ uint32_t gpiobase;
+ uint32_t thermalbase;
+ uint32_t system_type; /* 0 Mobile, 1 Desktop/Server */
+ uint32_t tseg_size;
+ uint8_t spd_addresses[4];
+ uint8_t ts_addresses[4];
+ int boot_mode;
+ int ec_present;
+ int gbe_enable;
+ /*
+ * 0 = leave channel enabled
+ * 1 = disable dimm 0 on channel
+ * 2 = disable dimm 1 on channel
+ * 3 = disable dimm 0+1 on channel
+ */
+ int dimm_channel0_disabled;
+ int dimm_channel1_disabled;
+ /* Seed values saved in CMOS */
+ uint32_t scrambler_seed;
+ uint32_t scrambler_seed_s3;
+ /* Data read from flash and passed into MRC */
+ unsigned char *mrc_input;
+ unsigned int mrc_input_len;
+ /* Data from MRC that should be saved to flash */
+ unsigned char *mrc_output;
+ unsigned int mrc_output_len;
+ /*
+ * Max frequency DDR3 could be ran at. Could be one of four values:
+ * 800, 1067, 1333, 1600
+ */
+ uint32_t max_ddr3_freq;
+ /*
+ * USB Port Configuration:
+ * [0] = enable
+ * [1] = overcurrent pin
+ * [2] = length
+ *
+ * Ports 0-7 can be mapped to OC0-OC3
+ * Ports 8-13 can be mapped to OC4-OC7
+ *
+ * Port Length
+ * MOBILE:
+ * < 0x050 = Setting 1 (back panel, 1-5in, lowest tx amplitude)
+ * < 0x140 = Setting 2 (back panel, 5-14in, highest tx amplitude)
+ * DESKTOP:
+ * < 0x080 = Setting 1 (front/back panel, <8in, lowest tx amplitude)
+ * < 0x130 = Setting 2 (back panel, 8-13in, higher tx amplitude)
+ * < 0x150 = Setting 3 (back panel, 13-15in, higest tx amplitude)
+ */
+ uint16_t usb_port_config[16][3];
+ /* See the usb3 struct above for details */
+ struct pch_usb3_controller_settings usb3;
+ /*
+ * SPD data array for onboard RAM. Specify address 0xf0,
+ * 0xf1, 0xf2, 0xf3 to index one of the 4 slots in
+ * spd_address for a given "DIMM".
+ */
+ uint8_t spd_data[4][256];
+ tx_byte_func tx_byte;
+ int ddr3lv_support;
+ /*
+ * pcie_init needs to be set to 1 to have the system agent initialise
+ * PCIe. Note: This should only be required if your system has Gen3
+ * devices and it will increase your boot time by at least 100ms.
+ */
+ int pcie_init;
+ /*
+ * N mode functionality. Leave this setting at 0.
+ * 0 Auto
+ * 1 1N
+ * 2 2N
+ */
+ int nmode;
+ /*
+ * DDR refresh rate config. JEDEC Standard No.21-C Annex K allows
+ * for DIMM SPD data to specify whether double-rate is required for
+ * extended operating temperature range.
+ * 0 Enable double rate based upon temperature thresholds
+ * 1 Normal rate
+ * 2 Always enable double rate
+ */
+ int ddr_refresh_rate_config;
+};
+
+#endif
diff --git a/arch/x86/include/asm/arch-ivybridge/sandybridge.h b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
index a1072f21e8..114ee19e24 100644
--- a/arch/x86/include/asm/arch-ivybridge/sandybridge.h
+++ b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
@@ -102,6 +102,8 @@
#define SSKPD 0x5d14 /* 16bit (scratchpad) */
#define BIOS_RESET_CPL 0x5da8 /* 8bit */
+void report_platform_info(void);
+
void sandybridge_early_init(int chipset_type);
#endif
diff --git a/arch/x86/include/asm/config.h b/arch/x86/include/asm/config.h
index ff15828a71..c97d988f3b 100644
--- a/arch/x86/include/asm/config.h
+++ b/arch/x86/include/asm/config.h
@@ -10,5 +10,6 @@
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+#define asmlinkage __attribute__((regparm(0)))
#endif
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index 4ea46d79eb..48bbd1ae43 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -17,6 +17,18 @@ enum pei_boot_mode_t {
};
+struct memory_area {
+ uint64_t start;
+ uint64_t size;
+};
+
+struct memory_info {
+ int num_areas;
+ uint64_t total_memory;
+ uint64_t total_32bit_memory;
+ struct memory_area area[CONFIG_NR_DRAM_BANKS];
+};
+
/* Architecture-specific global data */
struct arch_global_data {
struct global_data *gd_addr; /* Location of Global Data */
@@ -34,6 +46,7 @@ struct arch_global_data {
struct pci_controller *hose; /* PCI hose for early use */
enum pei_boot_mode_t pei_boot_mode;
const struct pch_gpio_map *gpio_map; /* board GPIO map */
+ struct memory_info meminfo; /* Memory information */
};
#endif
diff --git a/arch/x86/include/asm/post.h b/arch/x86/include/asm/post.h
index 61dcda190a..ce68839dec 100644
--- a/arch/x86/include/asm/post.h
+++ b/arch/x86/include/asm/post.h
@@ -27,6 +27,11 @@
#define POST_CPU_INIT 0x2b
#define POST_EARLY_INIT 0x2c
#define POST_CPU_INFO 0x2d
+#define POST_PRE_MRC 0x2e
+#define POST_MRC 0x2f
+#define POST_DRAM 0x2f
+
+#define POST_RAM_FAILURE 0xea
/* Output a post code using al - value must be 0 to 0xff */
#ifdef __ASSEMBLY__
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index 0399417e40..98217dd615 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -70,4 +70,6 @@ static inline __attribute__((no_instrument_function)) uint64_t rdtsc(void)
void timer_set_tsc_base(uint64_t new_base);
uint64_t timer_get_tsc(void);
+void quick_ram_check(void);
+
#endif /* _U_BOOT_I386_H_ */
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 25b672a0c1..e146e646cd 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SYS_PCAT_TIMER) += pcat_timer.o
obj-$(CONFIG_PCI) += pci_type1.o
obj-y += relocate.o
obj-y += physmem.o
+obj-$(CONFIG_X86_RAMTEST) += ramtest.o
obj-y += string.o
obj-$(CONFIG_SYS_X86_TSC_TIMER) += tsc_timer.o
obj-$(CONFIG_VIDEO_VGA) += video.o
diff --git a/arch/x86/lib/ramtest.c b/arch/x86/lib/ramtest.c
new file mode 100644
index 0000000000..c21be03848
--- /dev/null
+++ b/arch/x86/lib/ramtest.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * From Coreboot src/lib/ramtest.c
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/post.h>
+
+static void write_phys(unsigned long addr, u32 value)
+{
+#if CONFIG_SSE2
+ asm volatile(
+ "movnti %1, (%0)"
+ : /* outputs */
+ : "r" (addr), "r" (value) /* inputs */
+ : /* clobbers */
+ );
+#else
+ writel(value, addr);
+#endif
+}
+
+static u32 read_phys(unsigned long addr)
+{
+ return readl(addr);
+}
+
+static void phys_memory_barrier(void)
+{
+#if CONFIG_SSE2
+ /* Needed for movnti */
+ asm volatile(
+ "sfence"
+ :
+ :
+ : "memory"
+ );
+#else
+ asm volatile(""
+ :
+ :
+ : "memory");
+#endif
+}
+
+void quick_ram_check(void)
+{
+ int fail = 0;
+ u32 backup;
+
+ backup = read_phys(CONFIG_RAMBASE);
+ write_phys(CONFIG_RAMBASE, 0x55555555);
+ phys_memory_barrier();
+ if (read_phys(CONFIG_RAMBASE) != 0x55555555)
+ fail = 1;
+ write_phys(CONFIG_RAMBASE, 0xaaaaaaaa);
+ phys_memory_barrier();
+ if (read_phys(CONFIG_RAMBASE) != 0xaaaaaaaa)
+ fail = 1;
+ write_phys(CONFIG_RAMBASE, 0x00000000);
+ phys_memory_barrier();
+ if (read_phys(CONFIG_RAMBASE) != 0x00000000)
+ fail = 1;
+ write_phys(CONFIG_RAMBASE, 0xffffffff);
+ phys_memory_barrier();
+ if (read_phys(CONFIG_RAMBASE) != 0xffffffff)
+ fail = 1;
+
+ write_phys(CONFIG_RAMBASE, backup);
+ if (fail) {
+ post_code(POST_RAM_FAILURE);
+ panic("RAM INIT FAILURE!\n");
+ }
+ phys_memory_barrier();
+}
diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h
index 3063bd9a0f..8caeca6430 100644
--- a/include/configs/chromebook_link.h
+++ b/include/configs/chromebook_link.h
@@ -18,12 +18,16 @@
#define CONFIG_SYS_CAR_ADDR 0xff7e0000
#define CONFIG_SYS_CAR_SIZE (128 * 1024)
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
+#define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000
#define CONFIG_SYS_X86_START16 0xfffff800
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_X86_RESET_VECTOR
#define CONFIG_NR_DRAM_BANKS 8
+#define CONFIG_X86_MRC_START 0xfffa0000
+#define CONFIG_CACHE_MRC_SIZE_KB 512
#define CONFIG_COREBOOT_SERIAL
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 825e9f7842..f16ae32913 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -192,7 +192,7 @@
#define CONFIG_SYS_STACK_SIZE (32 * 1024)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN 0x200000
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#define CONFIG_SYS_MALLOC_F_LEN (2 << 10)
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 3bd60b7f12..abfd678424 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -119,6 +119,7 @@ enum fdt_compat_id {
COMPAT_PARADE_PS8625, /* Parade PS8622 EDP->LVDS bridge */
COMPAT_INTEL_LPC, /* Intel Low Pin Count I/F */
COMPAT_INTEL_MICROCODE, /* Intel microcode update */
+ COMPAT_MEMORY_SPD, /* Memory SPD information */
COMPAT_COUNT,
};
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 9a68f9ca15..aafc4f9315 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -74,6 +74,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(PARADE_PS8625, "parade,ps8625"),
COMPAT(COMPAT_INTEL_LPC, "intel,lpc"),
COMPAT(INTEL_MICROCODE, "intel,microcode"),
+ COMPAT(MEMORY_SPD, "memory-spd"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
OpenPOWER on IntegriCloud