diff options
| -rw-r--r-- | include/configs/hcu4.h | 2 | ||||
| -rw-r--r-- | include/configs/hcu5.h | 2 | ||||
| -rw-r--r-- | include/configs/kilauea.h | 3 | ||||
| -rw-r--r-- | include/configs/lwmon5.h | 3 | ||||
| -rw-r--r-- | include/configs/makalu.h | 3 | ||||
| -rw-r--r-- | include/configs/mcu25.h | 2 | ||||
| -rw-r--r-- | include/configs/zeus.h | 2 | ||||
| -rw-r--r-- | post/cpu/ppc4xx/uart.c | 302 |
8 files changed, 32 insertions, 287 deletions
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index 26992e7538..68bf99871e 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -191,7 +191,7 @@ CONFIG_SYS_POST_ETHER | \ CONFIG_SYS_POST_SPR) -#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE} +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1 } #undef CONFIG_LOGBUFFER #define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index f2ab50c759..5aa304d251 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -208,7 +208,7 @@ CONFIG_SYS_POST_ETHER | \ CONFIG_SYS_POST_SPR) -#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE} +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1 } #define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 37eaf8f6be..612a0fe9ff 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -457,7 +457,8 @@ CONFIG_SYS_POST_UART) /* Define here the base-addresses of the UARTs to test in POST */ -#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE, UART1_BASE} +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ + CONFIG_SYS_NS16550_COM2 } #define CONFIG_LOGBUFFER #define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 23495838f4..4a3b1dc11d 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -185,7 +185,8 @@ CONFIG_SYS_POST_BSPEC5) /* Define here the base-addresses of the UARTs to test in POST */ -#define CONFIG_SYS_POST_UART_TABLE { UART0_BASE, UART1_BASE } +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ + CONFIG_SYS_NS16550_COM2 } #define CONFIG_POST_WATCHDOG { \ "Watchdog timer test", \ diff --git a/include/configs/makalu.h b/include/configs/makalu.h index 905c719103..80163d49ee 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -264,7 +264,8 @@ CONFIG_SYS_POST_UART) /* Define here the base-addresses of the UARTs to test in POST */ -#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE, UART1_BASE} +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ + CONFIG_SYS_NS16550_COM2 } #define CONFIG_LOGBUFFER #define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h index 3e04cfe730..8dd87cb8c5 100644 --- a/include/configs/mcu25.h +++ b/include/configs/mcu25.h @@ -192,7 +192,7 @@ CONFIG_SYS_POST_ETHER | \ CONFIG_SYS_POST_SPR) -#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE} +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1 } #undef CONFIG_LOGBUFFER #define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index aa250cc2d0..06d4526b07 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -94,7 +94,7 @@ #define CONFIG_SYS_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */ /* Define here the base-addresses of the UARTs to test in POST */ -#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE} +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1 } #define CONFIG_LOGBUFFER #define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c index 6b61cc191e..d76895696b 100644 --- a/post/cpu/ppc4xx/uart.c +++ b/post/cpu/ppc4xx/uart.c @@ -26,9 +26,10 @@ */ #include <common.h> -#include <ppc4xx.h> +#include <asm/ppc4xx.h> #include <ns16550.h> #include <asm/io.h> +#include <serial.h> /* * UART test @@ -46,299 +47,40 @@ * be overridden in the board config file */ #ifndef CONFIG_SYS_POST_UART_TABLE -#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE} -#endif - -#include <asm/processor.h> -#include <serial.h> - -#if defined(CONFIG_440) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define UART0_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000300 -#define UART1_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 -#define UART2_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000500 -#define UART3_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000600 -#else -#define UART0_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000200 -#define UART1_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000300 -#endif - -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) -#define UART2_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000600 -#endif - -#if defined(CONFIG_440GP) -#define CR0_MASK 0x3fff0000 -#define CR0_EXTCLK_ENA 0x00600000 -#define CR0_UDIV_POS 16 -#define UDIV_SUBTRACT 1 -#define UART0_SDR CPC0_CR0 -#define MFREG(a, d) d = mfdcr(a) -#define MTREG(a, d) mtdcr(a, d) -#else /* #if defined(CONFIG_440GP) */ -/* all other 440 PPC's access clock divider via sdr register */ -#define CR0_MASK 0xdfffffff -#define CR0_EXTCLK_ENA 0x00800000 -#define CR0_UDIV_POS 0 -#define UDIV_SUBTRACT 0 -#define UART0_SDR SDR0_UART0 -#define UART1_SDR SDR0_UART1 -#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ - defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) -#define UART2_SDR SDR0_UART2 -#endif -#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ - defined(CONFIG_440GR) || defined(CONFIG_440GRX) -#define UART3_SDR SDR0_UART3 -#endif -#define MFREG(a, d) mfsdr(a, d) -#define MTREG(a, d) mtsdr(a, d) -#endif /* #if defined(CONFIG_440GP) */ -#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ) -#define UART0_BASE 0xef600300 -#define UART1_BASE 0xef600400 -#define UCR0_MASK 0x0000007f -#define UCR1_MASK 0x00007f00 -#define UCR0_UDIV_POS 0 -#define UCR1_UDIV_POS 8 -#define UDIV_MAX 127 -#elif defined(CONFIG_405EX) -#define UART0_BASE 0xef600200 -#define UART1_BASE 0xef600300 -#define CR0_MASK 0x000000ff -#define CR0_EXTCLK_ENA 0x00800000 -#define CR0_UDIV_POS 0 -#define UDIV_SUBTRACT 0 -#define UART0_SDR SDR0_UART0 -#define UART1_SDR SDR0_UART1 -#define MFREG(a, d) mfsdr(a, d) -#define MTREG(a, d) mtsdr(a, d) -#else /* CONFIG_405GP || CONFIG_405CR */ -#define UART0_BASE 0xef600300 -#define UART1_BASE 0xef600400 -#define CR0_MASK 0x00001fff -#define CR0_EXTCLK_ENA 0x000000c0 -#define CR0_UDIV_POS 1 -#define UDIV_MAX 32 +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ + CONFIG_SYS_NS16550_COM2, CONFIG_SYS_NS16550_COM3, \ + CONFIG_SYS_NS16550_COM4 } #endif DECLARE_GLOBAL_DATA_PTR; -static void uart_post_init_common(struct NS16550 *com_port, unsigned short bdiv) -{ - volatile char val; - - out_8(&com_port->lcr, 0x80); /* set DLAB bit */ - out_8(&com_port->dll, bdiv); /* set baudrate divisor */ - out_8(&com_port->dlm, bdiv >> 8); /* set baudrate divisor */ - out_8(&com_port->lcr, 0x03); /* clear DLAB; set 8 bits, no parity */ - out_8(&com_port->fcr, 0x00); /* disable FIFO */ - out_8(&com_port->mcr, 0x10); /* enable loopback mode */ - val = in_8(&com_port->lsr); /* clear line status */ - val = in_8(&com_port->rbr); /* read receive buffer */ - out_8(&com_port->scr, 0x00); /* set scratchpad */ - out_8(&com_port->ier, 0x00); /* set interrupt enable reg */ -} - -#if defined(CONFIG_440) || defined(CONFIG_405EX) -#if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK) -static void serial_divs (int baudrate, unsigned long *pudiv, - unsigned short *pbdiv) -{ - sys_info_t sysinfo; - unsigned long div; /* total divisor udiv * bdiv */ - unsigned long umin; /* minimum udiv */ - unsigned short diff; /* smallest diff */ - unsigned long udiv; /* best udiv */ - unsigned short idiff; /* current diff */ - unsigned short ibdiv; /* current bdiv */ - unsigned long i; - unsigned long est; /* current estimate */ - - get_sys_info(&sysinfo); - - udiv = 32; /* Assume lowest possible serial clk */ - div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */ - umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */ - diff = 32; /* highest possible */ - - /* i is the test udiv value -- start with the largest - * possible (32) to minimize serial clock and constrain - * search to umin. - */ - for (i = 32; i > umin; i--) { - ibdiv = div / i; - est = i * ibdiv; - idiff = (est > div) ? (est-div) : (div-est); - if (idiff == 0) { - udiv = i; - break; /* can't do better */ - } else if (idiff < diff) { - udiv = i; /* best so far */ - diff = idiff; /* update lowest diff*/ - } - } - - *pudiv = udiv; - *pbdiv = div / udiv; -} -#endif - -static int uart_post_init (struct NS16550 *com_port) +static int test_ctlr (struct NS16550 *com_port, int index) { - unsigned long reg = 0; - unsigned long udiv; - unsigned short bdiv; -#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK - unsigned long tmp; -#endif + int res = -1; + char test_str[] = "*** UART Test String ***\r\n"; int i; + int divisor; - for (i = 0; i < 3500; i++) { - if (in_8(&com_port->lsr) & UART_LSR_THRE) - break; - udelay (100); - } - MFREG(UART0_SDR, reg); - reg &= ~CR0_MASK; - -#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK - reg |= CR0_EXTCLK_ENA; - udiv = 1; - tmp = gd->baudrate * 16; - bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp; -#else - /* For 440, the cpu clock is on divider chain A, UART on divider - * chain B ... so cpu clock is irrelevant. Get the "optimized" - * values that are subject to the 1/2 opb clock constraint - */ - serial_divs (gd->baudrate, &udiv, &bdiv); -#endif - - reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */ + divisor = (get_serial_clock() + (gd->baudrate * (16 / 2))) / + (16 * gd->baudrate); + NS16550_init(com_port, divisor); /* - * Configure input clock to baudrate generator for all - * available serial ports here + * Set internal loopback mode in UART */ - MTREG(UART0_SDR, reg); -#if defined(UART1_SDR) - MTREG(UART1_SDR, reg); -#endif -#if defined(UART2_SDR) - MTREG(UART2_SDR, reg); -#endif -#if defined(UART3_SDR) - MTREG(UART3_SDR, reg); -#endif - - uart_post_init_common(com_port, bdiv); - - return 0; -} - -#else /* CONFIG_440 */ - -static int uart_post_init (struct NS16550 *com_port) -{ - unsigned long reg; - unsigned long tmp; - unsigned long clk; - unsigned long udiv; - unsigned short bdiv; - int i; - - for (i = 0; i < 3500; i++) { - if (in_8(&com_port->lsr) & UART_LSR_THRE) - break; - udelay (100); - } - -#if defined(CONFIG_405EZ) - serial_divs(gd->baudrate, &udiv, &bdiv); - clk = tmp = reg = 0; -#else -#ifdef CONFIG_405EP - reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK); - clk = gd->cpu_clk; - tmp = CONFIG_SYS_BASE_BAUD * 16; - udiv = (clk + tmp / 2) / tmp; - if (udiv > UDIV_MAX) /* max. n bits for udiv */ - udiv = UDIV_MAX; - reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */ - reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */ - mtdcr (CPC0_UCR, reg); -#else /* CONFIG_405EP */ - reg = mfdcr(CPC0_CR0) & ~CR0_MASK; -#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK - clk = CONFIG_SYS_EXT_SERIAL_CLOCK; - udiv = 1; - reg |= CR0_EXTCLK_ENA; -#else - clk = gd->cpu_clk; -#ifdef CONFIG_SYS_405_UART_ERRATA_59 - udiv = 31; /* Errata 59: stuck at 31 */ -#else - tmp = CONFIG_SYS_BASE_BAUD * 16; - udiv = (clk + tmp / 2) / tmp; - if (udiv > UDIV_MAX) /* max. n bits for udiv */ - udiv = UDIV_MAX; -#endif -#endif - reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */ - mtdcr (CPC0_CR0, reg); -#endif /* CONFIG_405EP */ - tmp = gd->baudrate * udiv * 16; - bdiv = (clk + tmp / 2) / tmp; -#endif /* CONFIG_405EZ */ - - uart_post_init_common(com_port, bdiv); + out_8(&com_port->mcr, in_8(&com_port->mcr) | UART_MCR_LOOP); - return 0; -} -#endif /* CONFIG_440 */ - -static void uart_post_putc (struct NS16550 *com_port, char c) -{ - int i; - - out_8(&com_port->thr, c); /* put character out */ - - /* Wait for transfer completion */ - for (i = 0; i < 3500; i++) { - if (in_8(&com_port->lsr) & UART_LSR_THRE) - break; - udelay (100); - } -} - -static int uart_post_getc (struct NS16550 *com_port) -{ - int i; - - /* Wait for character available */ - for (i = 0; i < 3500; i++) { - if (in_8(&com_port->lsr) & UART_LSR_DR) - break; - udelay (100); - } - - return 0xff & in_8(&com_port->rbr); -} - -static int test_ctlr (struct NS16550 *com_port, int index) -{ - int res = -1; - char test_str[] = "*** UART Test String ***\r\n"; - int i; + /* Reset FIFOs */ + out_8(&com_port->fcr, UART_FCR_RXSR | UART_FCR_TXSR); + udelay(100); - uart_post_init (com_port); + /* Flush RX-FIFO */ + while (NS16550_tstc(com_port)) + NS16550_getc(com_port); for (i = 0; i < sizeof (test_str) - 1; i++) { - uart_post_putc (com_port, test_str[i]); - if (uart_post_getc (com_port) != test_str[i]) + NS16550_putc(com_port, test_str[i]); + if (NS16550_getc(com_port) != test_str[i]) goto done; } res = 0; |
