21 files changed, 629 insertions, 31 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 2ea3d698fb..a31bf40e5b 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -27,6 +27,7 @@
 #include <miiphy.h>
 #include <cpsw.h>
 #include <asm/errno.h>
+#include <linux/compiler.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/musb.h>
@@ -137,6 +138,16 @@ int arch_misc_init(void)
 }
 
 #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+/*
+ * This function is the place to do per-board things such as ramp up the
+ * MPU clock frequency.
+ */
+__weak void am33xx_spl_board_init(void)
+{
+	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
 static void rtc32k_enable(void)
 {
 	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index e5f287b338..fabe2595a3 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -51,10 +51,14 @@ const struct dpll_regs dpll_ddr_regs = {
 	.cm_div_m2_dpll		= CM_WKUP + 0xA0,
 };
 
-const struct dpll_params dpll_mpu = {
+struct dpll_params dpll_mpu_opp100 = {
 		CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1};
-const struct dpll_params dpll_core = {
+const struct dpll_params dpll_core_opp100 = {
 		1000, OSC-1, -1, -1, 10, 8, 4};
+const struct dpll_params dpll_mpu = {
+		MPUPLL_M_300, OSC-1, 1, -1, -1, -1, -1};
+const struct dpll_params dpll_core = {
+		50, OSC-1, -1, -1, 1, 1, 1};
 const struct dpll_params dpll_per = {
 		960, OSC-1, 5, -1, -1, -1, -1};
 
diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c
index 63afaaa328..50eb598ff2 100644
--- a/arch/arm/cpu/armv7/am33xx/sys_info.c
+++ b/arch/arm/cpu/armv7/am33xx/sys_info.c
@@ -17,6 +17,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/clock.h>
+#include <power/tps65910.h>
 
 struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE;
 
@@ -119,3 +120,59 @@ int print_cpuinfo(void)
 	return 0;
 }
 #endif	/* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_AM33XX
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev)
+{
+	int sil_rev;
+
+	sil_rev = readl(&cdev->deviceid) >> 28;
+
+	if (sil_rev == 1)
+		/* PG 2.0, efuse may not be set. */
+		return MPUPLL_M_800;
+	else if (sil_rev >= 2) {
+		/* Check what the efuse says our max speed is. */
+		int efuse_arm_mpu_max_freq;
+		efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma);
+		switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) {
+		case AM335X_ZCZ_1000:
+			return MPUPLL_M_1000;
+		case AM335X_ZCZ_800:
+			return MPUPLL_M_800;
+		case AM335X_ZCZ_720:
+			return MPUPLL_M_720;
+		case AM335X_ZCZ_600:
+		case AM335X_ZCE_600:
+			return MPUPLL_M_600;
+		case AM335X_ZCZ_300:
+		case AM335X_ZCE_300:
+			return MPUPLL_M_300;
+		}
+	}
+
+	/* PG 1.0 or otherwise unknown, use the PG1.0 max */
+	return MPUPLL_M_720;
+}
+
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency)
+{
+	/* For PG2.1 and later, we have one set of values. */
+	if (sil_rev >= 2) {
+		switch (frequency) {
+		case MPUPLL_M_1000:
+			return TPS65910_OP_REG_SEL_1_3_2_5;
+		case MPUPLL_M_800:
+			return TPS65910_OP_REG_SEL_1_2_6;
+		case MPUPLL_M_720:
+			return TPS65910_OP_REG_SEL_1_2_0;
+		case MPUPLL_M_600:
+		case MPUPLL_M_300:
+			return TPS65910_OP_REG_SEL_1_1_3;
+		}
+	}
+
+	/* Default to PG1.0/PG2.0 values. */
+	return TPS65910_OP_REG_SEL_1_1_3;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 6b4772b684..0ffa03ac01 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -76,6 +76,9 @@ void spl_board_init(void)
 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
 	arch_misc_init();
 #endif
+#ifdef CONFIG_AM33XX
+	am33xx_spl_board_init();
+#endif
 }
 
 int board_mmc_init(bd_t *bis)
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 7580594074..ab0c5680f5 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -589,13 +589,6 @@ void scale_vcores(struct vcores_data const *vcores)
 
 	val = optimize_vcore_voltage(&vcores->iva);
 	do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
-
-	 if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
-		/* Configure LDO SRAM "magic" bits */
-		writel(2, (*prcm)->prm_sldo_core_setup);
-		writel(2, (*prcm)->prm_sldo_mpu_setup);
-		writel(2, (*prcm)->prm_sldo_mm_setup);
-	}
 }
 
 static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 579818d559..5a3d52c11a 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -286,12 +286,6 @@ struct prcm_regs const omap5_es1_prcm = {
 	.prm_vc_val_bypass = 0x4ae07ba0,
 	.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
 	.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
-	.prm_sldo_core_setup = 0x4ae07bc4,
-	.prm_sldo_core_ctrl = 0x4ae07bc8,
-	.prm_sldo_mpu_setup = 0x4ae07bcc,
-	.prm_sldo_mpu_ctrl = 0x4ae07bd0,
-	.prm_sldo_mm_setup = 0x4ae07bd4,
-	.prm_sldo_mm_ctrl = 0x4ae07bd8,
 
 	/* SCRM stuff, used by some boards */
 	.scrm_auxclk0 = 0x4ae0a310,
@@ -735,12 +729,6 @@ struct prcm_regs const omap5_es2_prcm = {
 	.prm_vc_cfg_i2c_mode = 0x4ae07cb4,
 	.prm_vc_cfg_i2c_clk = 0x4ae07cb8,
 
-	.prm_sldo_core_setup = 0x4ae07cc4,
-	.prm_sldo_core_ctrl = 0x4ae07cc8,
-	.prm_sldo_mpu_setup = 0x4ae07ccc,
-	.prm_sldo_mpu_ctrl = 0x4ae07cd0,
-	.prm_sldo_mm_setup = 0x4ae07cd4,
-	.prm_sldo_mm_ctrl = 0x4ae07cd8,
 	.prm_abbldo_mpu_setup = 0x4ae07cdc,
 	.prm_abbldo_mpu_ctrl = 0x4ae07ce0,
 
diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index 140379fb38..02ed5957e9 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -11,9 +11,17 @@
 #ifndef _CLOCKS_AM33XX_H_
 #define _CLOCKS_AM33XX_H_
 
+/* MAIN PLL Fdll supported frequencies */
+#define MPUPLL_M_1000	1000
+#define MPUPLL_M_800	800
+#define MPUPLL_M_720	720
+#define MPUPLL_M_600	600
+#define MPUPLL_M_550	550
+#define MPUPLL_M_300	300
+
 /* MAIN PLL Fdll = 550 MHz, by default */
 #ifndef CONFIG_SYS_MPUCLK
-#define CONFIG_SYS_MPUCLK	550
+#define CONFIG_SYS_MPUCLK	MPUPLL_M_550
 #endif
 
 #define UART_RESET		(0x1 << 1)
@@ -21,5 +29,7 @@
 #define UART_SMART_IDLE_EN	(0x1 << 0x3)
 
 extern void enable_dmm_clocks(void);
+extern const struct dpll_params dpll_core_opp100;
+extern struct dpll_params dpll_mpu_opp100;
 
 #endif	/* endif _CLOCKS_AM33XX_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 73e6db8998..52fa128af9 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -38,6 +38,16 @@
 #define AM335X				0xB944
 #define TI81XX				0xB81E
 #define DEVICE_ID			(CTRL_BASE + 0x0600)
+#define DEVICE_ID_MASK			0x1FFF
+
+/* MPU max frequencies */
+#define AM335X_ZCZ_300			0x1FEF
+#define AM335X_ZCZ_600			0x1FAF
+#define AM335X_ZCZ_720			0x1F2F
+#define AM335X_ZCZ_800			0x1E2F
+#define AM335X_ZCZ_1000			0x1C2F
+#define AM335X_ZCE_300			0x1FDF
+#define AM335X_ZCE_600			0x1F9F
 
 /* This gives the status of the boot mode pins on the evm */
 #define SYSBOOT_MASK			(BIT(0) | BIT(1) | BIT(2)\
@@ -509,6 +519,8 @@ struct ctrl_dev {
 	unsigned int macid1h;		/* offset 0x3c */
 	unsigned int resv4[4];
 	unsigned int miisel;		/* offset 0x50 */
+	unsigned int resv5[106];
+	unsigned int efuse_sma;		/* offset 0x1FC */
 };
 
 /* gmii_sel register defines */
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index c6070a3fc9..87b7d367b9 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -10,6 +10,7 @@
 
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
+#include <asm/arch/cpu.h>
 
 #define BOARD_REV_ID	0x0
 
@@ -42,4 +43,7 @@ u32 wait_on_value(u32, u32, void *, u32);
 #ifdef CONFIG_NOR_BOOT
 void enable_norboot_pin_mux(void);
 #endif
+void am33xx_spl_board_init(void);
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev);
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
 #endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 5e2f027ba4..61fee9f06d 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -310,12 +310,6 @@ struct prcm_regs {
 	u32 prm_vc_val_bypass;
 	u32 prm_vc_cfg_i2c_mode;
 	u32 prm_vc_cfg_i2c_clk;
-	u32 prm_sldo_core_setup;
-	u32 prm_sldo_core_ctrl;
-	u32 prm_sldo_mpu_setup;
-	u32 prm_sldo_mpu_ctrl;
-	u32 prm_sldo_mm_setup;
-	u32 prm_sldo_mm_ctrl;
 	u32 prm_abbldo_mpu_setup;
 	u32 prm_abbldo_mpu_ctrl;
 
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index cc0442612f..c2fc5a613b 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -26,6 +26,8 @@
 #include <i2c.h>
 #include <miiphy.h>
 #include <cpsw.h>
+#include <power/tps65217.h>
+#include <power/tps65910.h>
 #include "board.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -244,6 +246,150 @@ const struct dpll_params dpll_ddr_evm_sk = {
 const struct dpll_params dpll_ddr_bone_black = {
 		400, OSC-1, 1, -1, -1, -1, -1};
 
+void am33xx_spl_board_init(void)
+{
+	struct am335x_baseboard_id header;
+	int mpu_vdd;
+
+	if (read_eeprom(&header) < 0)
+		puts("Could not get board ID.\n");
+
+	/* Get the frequency */
+	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
+
+	if (board_is_bone(&header) || board_is_bone_lt(&header)) {
+		/* BeagleBone PMIC Code */
+		int usb_cur_lim;
+
+		/*
+		 * Only perform PMIC configurations if board rev > A1
+		 * on Beaglebone White
+		 */
+		if (board_is_bone(&header) && !strncmp(header.version,
+						       "00A1", 4))
+			return;
+
+		if (i2c_probe(TPS65217_CHIP_PM))
+			return;
+
+		/*
+		 * On Beaglebone White we need to ensure we have AC power
+		 * before increasing the frequency.
+		 */
+		if (board_is_bone(&header)) {
+			uchar pmic_status_reg;
+			if (tps65217_reg_read(TPS65217_STATUS,
+					      &pmic_status_reg))
+				return;
+			if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) {
+				puts("No AC power, disabling frequency switch\n");
+				return;
+			}
+		}
+
+		/*
+		 * Override what we have detected since we know if we have
+		 * a Beaglebone Black it supports 1GHz.
+		 */
+		if (board_is_bone_lt(&header))
+			dpll_mpu_opp100.m = MPUPLL_M_1000;
+
+		/*
+		 * Increase USB current limit to 1300mA or 1800mA and set
+		 * the MPU voltage controller as needed.
+		 */
+		if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
+			usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
+			mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
+		} else {
+			usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
+			mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
+		}
+
+		if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
+				       TPS65217_POWER_PATH,
+				       usb_cur_lim,
+				       TPS65217_USB_INPUT_CUR_LIMIT_MASK))
+			puts("tps65217_reg_write failure\n");
+
+		/* Set DCDC3 (CORE) voltage to 1.125V */
+		if (tps65217_voltage_update(TPS65217_DEFDCDC3,
+					    TPS65217_DCDC_VOLT_SEL_1125MV)) {
+			puts("tps65217_voltage_update failure\n");
+			return;
+		}
+
+		/* Set CORE Frequencies to OPP100 */
+		do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+
+		/* Set DCDC2 (MPU) voltage */
+		if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
+			puts("tps65217_voltage_update failure\n");
+			return;
+		}
+
+		/*
+		 * Set LDO3, LDO4 output voltage to 3.3V for Beaglebone.
+		 * Set LDO3 to 1.8V and LDO4 to 3.3V for Beaglebone Black.
+		 */
+		if (board_is_bone(&header)) {
+			if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
+					       TPS65217_DEFLS1,
+					       TPS65217_LDO_VOLTAGE_OUT_3_3,
+					       TPS65217_LDO_MASK))
+				puts("tps65217_reg_write failure\n");
+		} else {
+			if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
+					       TPS65217_DEFLS1,
+					       TPS65217_LDO_VOLTAGE_OUT_1_8,
+					       TPS65217_LDO_MASK))
+				puts("tps65217_reg_write failure\n");
+		}
+
+		if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
+				       TPS65217_DEFLS2,
+				       TPS65217_LDO_VOLTAGE_OUT_3_3,
+				       TPS65217_LDO_MASK))
+			puts("tps65217_reg_write failure\n");
+	} else {
+		int sil_rev;
+
+		/*
+		 * The GP EVM, IDK and EVM SK use a TPS65910 PMIC.  For all
+		 * MPU frequencies we support we use a CORE voltage of
+		 * 1.1375V.  For MPU voltage we need to switch based on
+		 * the frequency we are running at.
+		 */
+		if (i2c_probe(TPS65910_CTRL_I2C_ADDR))
+			return;
+
+		/*
+		 * Depending on MPU clock and PG we will need a different
+		 * VDD to drive at that speed.
+		 */
+		sil_rev = readl(&cdev->deviceid) >> 28;
+		mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev,
+						      dpll_mpu_opp100.m);
+
+		/* Tell the TPS65910 to use i2c */
+		tps65910_set_i2c_control();
+
+		/* First update MPU voltage. */
+		if (tps65910_voltage_update(MPU, mpu_vdd))
+			return;
+
+		/* Second, update the CORE voltage. */
+		if (tps65910_voltage_update(CORE, TPS65910_OP_REG_SEL_1_1_3))
+			return;
+
+		/* Set CORE Frequencies to OPP100 */
+		do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+	}
+
+	/* Set MPU Frequency to what we detected now that voltages are set */
+	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
 const struct dpll_params *get_dpll_ddr_params(void)
 {
 	struct am335x_baseboard_id header;
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 9bab71a212..39240d9662 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -568,9 +568,14 @@ static void cpsw_set_slave_mac(struct cpsw_slave *slave,
 static void cpsw_slave_update_link(struct cpsw_slave *slave,
 				   struct cpsw_priv *priv, int *link)
 {
-	struct phy_device *phy = priv->phydev;
+	struct phy_device *phy;
 	u32 mac_control = 0;
 
+	phy = priv->phydev;
+
+	if (!phy)
+		return;
+
 	phy_startup(phy);
 	*link = phy->link;
 
@@ -947,6 +952,9 @@ static int cpsw_phy_init(struct eth_device *dev, struct cpsw_slave *slave)
 			dev,
 			slave->data->phy_if);
 
+	if (!phydev)
+		return -1;
+
 	phydev->supported &= supported;
 	phydev->advertising = phydev->supported;
 
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index f054470552..11b3d030e4 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -13,6 +13,8 @@ COBJS-$(CONFIG_POWER_MAX8998) += pmic_max8998.o
 COBJS-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
 COBJS-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
 COBJS-$(CONFIG_POWER_MAX77686) += pmic_max77686.o
+COBJS-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o
+COBJS-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/power/pmic/pmic_tps65217.c b/drivers/power/pmic/pmic_tps65217.c
new file mode 100644
index 0000000000..36e9024bf8
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65217.c
@@ -0,0 +1,109 @@
+/*
+ * (C) Copyright 2011-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <power/tps65217.h>
+
+/**
+ * tps65217_reg_read() - Generic function that can read a TPS65217 register
+ * @src_reg:		 Source register address
+ * @src_val:		 Address of destination variable
+ * @return:		 0 for success, not 0 on failure.
+ */
+int tps65217_reg_read(uchar src_reg, uchar *src_val)
+{
+	return i2c_read(TPS65217_CHIP_PM, src_reg, 1, src_val, 1);
+}
+
+/**
+ *  tps65217_reg_write() - Generic function that can write a TPS65217 PMIC
+ *			   register or bit field regardless of protection
+ *			   level.
+ *
+ *  @prot_level:	   Register password protection.  Use
+ *			   TPS65217_PROT_LEVEL_NONE,
+ *			   TPS65217_PROT_LEVEL_1 or TPS65217_PROT_LEVEL_2
+ *  @dest_reg:		   Register address to write.
+ *  @dest_val:		   Value to write.
+ *  @mask:		   Bit mask (8 bits) to be applied.  Function will only
+ *			   change bits that are set in the bit mask.
+ *
+ *  @return:		   0 for success, not 0 on failure, as per the i2c API
+ */
+int tps65217_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
+		       uchar mask)
+{
+	uchar read_val;
+	uchar xor_reg;
+	int ret;
+
+	/*
+	 * If we are affecting only a bit field, read dest_reg and apply the
+	 * mask
+	 */
+	if (mask != TPS65217_MASK_ALL_BITS) {
+		ret = i2c_read(TPS65217_CHIP_PM, dest_reg, 1, &read_val, 1);
+		if (ret)
+			return ret;
+		read_val &= (~mask);
+		read_val |= (dest_val & mask);
+		dest_val = read_val;
+	}
+
+	if (prot_level > 0) {
+		xor_reg = dest_reg ^ TPS65217_PASSWORD_UNLOCK;
+		ret = i2c_write(TPS65217_CHIP_PM, TPS65217_PASSWORD, 1,
+				&xor_reg, 1);
+		if (ret)
+			return ret;
+	}
+
+	ret = i2c_write(TPS65217_CHIP_PM, dest_reg, 1, &dest_val, 1);
+	if (ret)
+		return ret;
+
+	if (prot_level == TPS65217_PROT_LEVEL_2) {
+		ret = i2c_write(TPS65217_CHIP_PM, TPS65217_PASSWORD, 1,
+				&xor_reg, 1);
+		if (ret)
+			return ret;
+
+		ret = i2c_write(TPS65217_CHIP_PM, dest_reg, 1, &dest_val, 1);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * tps65217_voltage_update() - Function to change a voltage level, as this
+ *			       is a multi-step process.
+ * @dc_cntrl_reg:	       DC voltage control register to change.
+ * @volt_sel:		       New value for the voltage register
+ * @return:		       0 for success, not 0 on failure.
+ */
+int tps65217_voltage_update(uchar dc_cntrl_reg, uchar volt_sel)
+{
+	if ((dc_cntrl_reg != TPS65217_DEFDCDC1) &&
+	    (dc_cntrl_reg != TPS65217_DEFDCDC2) &&
+	    (dc_cntrl_reg != TPS65217_DEFDCDC3))
+		return 1;
+
+	/* set voltage level */
+	if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, dc_cntrl_reg, volt_sel,
+			       TPS65217_MASK_ALL_BITS))
+		return 1;
+
+	/* set GO bit to initiate voltage transition */
+	if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, TPS65217_DEFSLEW,
+			       TPS65217_DCDC_GO, TPS65217_DCDC_GO))
+		return 1;
+
+	return 0;
+}
diff --git a/drivers/power/pmic/pmic_tps65910.c b/drivers/power/pmic/pmic_tps65910.c
new file mode 100644
index 0000000000..7ee1160e0d
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65910.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2011-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <power/tps65910.h>
+
+/*
+ * tps65910_set_i2c_control() - Set the TPS65910 to be controlled via the I2C
+ * 				interface.
+ * @return:		       0 on success, not 0 on failure
+ */
+int tps65910_set_i2c_control(void)
+{
+	int ret;
+	uchar buf;
+
+	/* VDD1/2 voltage selection register access by control i/f */
+	ret = i2c_read(TPS65910_CTRL_I2C_ADDR, TPS65910_DEVCTRL_REG, 1,
+		       &buf, 1);
+
+	if (ret)
+		return ret;
+
+	buf |= TPS65910_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C;
+
+	return i2c_write(TPS65910_CTRL_I2C_ADDR, TPS65910_DEVCTRL_REG, 1,
+			 &buf, 1);
+}
+
+/*
+ * tps65910_voltage_update() - Voltage switching for MPU frequency switching.
+ * @module:		       mpu - 0, core - 1
+ * @vddx_op_vol_sel:	       vdd voltage to set
+ * @return:		       0 on success, not 0 on failure
+ */
+int tps65910_voltage_update(unsigned int module, unsigned char vddx_op_vol_sel)
+{
+	uchar buf;
+	unsigned int reg_offset;
+	int ret;
+
+	if (module == MPU)
+		reg_offset = TPS65910_VDD1_OP_REG;
+	else
+		reg_offset = TPS65910_VDD2_OP_REG;
+
+	/* Select VDDx OP   */
+	ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+	if (ret)
+		return ret;
+
+	buf &= ~TPS65910_OP_REG_CMD_MASK;
+
+	ret = i2c_write(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+	if (ret)
+		return ret;
+
+	/* Configure VDDx OP  Voltage */
+	ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+	if (ret)
+		return ret;
+
+	buf &= ~TPS65910_OP_REG_SEL_MASK;
+	buf |= vddx_op_vol_sel;
+
+	ret = i2c_write(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+	if (ret)
+		return ret;
+
+	ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+	if (ret)
+		return ret;
+
+	if ((buf & TPS65910_OP_REG_SEL_MASK) != vddx_op_vol_sel)
+		return 1;
+
+	return 0;
+}
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 3de30fc280..cdf689f875 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -170,6 +170,7 @@
 	"run mmcboot;" \
 	"setenv mmcdev 1; " \
 	"setenv bootpart 1:2; " \
+	"setenv mmcroot /dev/mmcblk1p2 ro; " \
 	"run mmcboot;" \
 	"run nandboot;"
 
@@ -189,8 +190,13 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 
+/* PMIC support */
+#define CONFIG_POWER_TPS65217
+#define CONFIG_POWER_TPS65910
+
 /* SPL */
 #ifndef CONFIG_NOR_BOOT
+#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 
 /* CPSW support */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 4fbe768cbc..7b120de213 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -14,7 +14,13 @@
 
 #define CONFIG_DRA7XX
 
-#define CONFIG_ENV_IS_NOWHERE		/* For now. */
+/* MMC ENV related defines */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
+#define CONFIG_ENV_OFFSET		0xE0000
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_CMD_SAVEENV
 
 #define CONSOLEDEV			"ttyO0"
 #define CONFIG_CONS_INDEX		1
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index e2b4de7414..2fff0beffa 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -201,6 +201,7 @@
 /* Defines for SPL */
 #define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
 /*
  * Place the image at the start of the ROM defined image space.
  * We limit our size to the ROM-defined downloaded image area, and use the
diff --git a/include/power/tps65217.h b/include/power/tps65217.h
new file mode 100644
index 0000000000..297c4cbd99
--- /dev/null
+++ b/include/power/tps65217.h
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2011-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * For more details, please see the TRM at http://www.ti.com/product/tps65217a
+ */
+
+#ifndef __POWER_TPS65217_H__
+#define __POWER_TPS65217_H__
+
+/* I2C chip address */
+#define TPS65217_CHIP_PM			0x24
+
+/* Registers */
+enum {
+	TPS65217_CHIPID				= 0x00,
+	TPS65217_POWER_PATH,
+	TPS65217_INTERRUPT,
+	TPS65217_CHGCONFIG0,
+	TPS65217_CHGCONFIG1,
+	TPS65217_CHGCONFIG2,
+	TPS65217_CHGCONFIG3,
+	TPS65217_WLEDCTRL1,
+	TPS65217_WLEDCTRL2,
+	TPS65217_MUXCTRL,
+	TPS65217_STATUS,
+	TPS65217_PASSWORD,
+	TPS65217_PGOOD,
+	TPS65217_DEFPG,
+	TPS65217_DEFDCDC1,
+	TPS65217_DEFDCDC2,
+	TPS65217_DEFDCDC3,
+	TPS65217_DEFSLEW,
+	TPS65217_DEFLDO1,
+	TPS65217_DEFLDO2,
+	TPS65217_DEFLS1,
+	TPS65217_DEFLS2,
+	TPS65217_ENABLE,
+	TPS65217_DEFUVLO,
+	TPS65217_SEQ1,
+	TPS65217_SEQ2,
+	TPS65217_SEQ3,
+	TPS65217_SEQ4,
+	TPS65217_SEQ5,
+	TPS65217_SEQ6,
+	TPS65217_PMIC_NUM_OF_REGS,
+};
+
+#define TPS65217_PROT_LEVEL_NONE		0x00
+#define TPS65217_PROT_LEVEL_1			0x01
+#define TPS65217_PROT_LEVEL_2			0x02
+
+#define TPS65217_PASSWORD_LOCK_FOR_WRITE	0x00
+#define TPS65217_PASSWORD_UNLOCK		0x7D
+
+#define TPS65217_DCDC_GO			0x80
+
+#define TPS65217_MASK_ALL_BITS			0xFF
+
+#define TPS65217_USB_INPUT_CUR_LIMIT_MASK	0x03
+#define TPS65217_USB_INPUT_CUR_LIMIT_100MA	0x00
+#define TPS65217_USB_INPUT_CUR_LIMIT_500MA	0x01
+#define TPS65217_USB_INPUT_CUR_LIMIT_1300MA	0x02
+#define TPS65217_USB_INPUT_CUR_LIMIT_1800MA	0x03
+
+#define TPS65217_DCDC_VOLT_SEL_1125MV		0x09
+#define TPS65217_DCDC_VOLT_SEL_1275MV		0x0F
+#define TPS65217_DCDC_VOLT_SEL_1325MV		0x11
+
+#define TPS65217_LDO_MASK			0x1F
+#define TPS65217_LDO_VOLTAGE_OUT_1_8		0x06
+#define TPS65217_LDO_VOLTAGE_OUT_3_3		0x1F
+
+#define TPS65217_PWR_SRC_USB_BITMASK		0x4
+#define TPS65217_PWR_SRC_AC_BITMASK		0x8
+
+int tps65217_reg_read(uchar src_reg, uchar *src_val);
+int tps65217_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
+		       uchar mask);
+int tps65217_voltage_update(uchar dc_cntrl_reg, uchar volt_sel);
+#endif	/* __POWER_TPS65217_H__ */
diff --git a/include/power/tps65910.h b/include/power/tps65910.h
new file mode 100644
index 0000000000..ca8430145b
--- /dev/null
+++ b/include/power/tps65910.h
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2011-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * For more details, please see the TRM at http://www.ti.com/product/tps65910
+ */
+#ifndef __POWER_TPS65910_H__
+#define __POWER_TPS65910_H__
+
+#define MPU     0
+#define CORE    1
+
+#define TPS65910_SR_I2C_ADDR				0x12
+#define TPS65910_CTRL_I2C_ADDR				0x2D
+
+/* PMIC Register offsets */
+enum {
+	TPS65910_VDD1_REG				= 0x21,
+	TPS65910_VDD1_OP_REG				= 0x22,
+	TPS65910_VDD2_REG				= 0x24,
+	TPS65910_VDD2_OP_REG				= 0x25,
+	TPS65910_DEVCTRL_REG				= 0x3F,
+};
+
+/* VDD2 & VDD1 control register (VDD2_REG & VDD1_REG) */
+#define TPS65910_VGAIN_SEL_MASK				(0x3 << 6)
+#define TPS65910_ILMAX_MASK				(0x1 << 5)
+#define TPS65910_TSTEP_MASK				(0x7 << 2)
+#define TPS65910_ST_MASK				(0x3)
+
+#define TPS65910_REG_VGAIN_SEL_X1			(0x0 << 6)
+#define TPS65910_REG_VGAIN_SEL_X1_0			(0x1 << 6)
+#define TPS65910_REG_VGAIN_SEL_X3			(0x2 << 6)
+#define TPS65910_REG_VGAIN_SEL_X4			(0x3 << 6)
+
+#define TPS65910_REG_ILMAX_1_0_A			(0x0 << 5)
+#define TPS65910_REG_ILMAX_1_5_A			(0x1 << 5)
+
+#define TPS65910_REG_TSTEP_				(0x0 << 2)
+#define TPS65910_REG_TSTEP_12_5				(0x1 << 2)
+#define TPS65910_REG_TSTEP_9_4				(0x2 << 2)
+#define TPS65910_REG_TSTEP_7_5				(0x3 << 2)
+#define TPS65910_REG_TSTEP_6_25				(0x4 << 2)
+#define TPS65910_REG_TSTEP_4_7				(0x5 << 2)
+#define TPS65910_REG_TSTEP_3_12				(0x6 << 2)
+#define TPS65910_REG_TSTEP_2_5				(0x7 << 2)
+
+#define TPS65910_REG_ST_OFF				(0x0)
+#define TPS65910_REG_ST_ON_HI_POW			(0x1)
+#define TPS65910_REG_ST_OFF_1				(0x2)
+#define TPS65910_REG_ST_ON_LOW_POW			(0x3)
+
+
+/* VDD2 & VDD1 voltage selection register. (VDD2_OP_REG & VDD1_OP_REG) */
+#define TPS65910_OP_REG_SEL				(0x7F)
+
+#define TPS65910_OP_REG_CMD_MASK			(0x1 << 7)
+#define TPS65910_OP_REG_CMD_OP				(0x0 << 7)
+#define TPS65910_OP_REG_CMD_SR				(0x1 << 7)
+
+#define TPS65910_OP_REG_SEL_MASK			(0x7F)
+#define TPS65910_OP_REG_SEL_0_9_5			(0x1F)	/* 0.9500 V */
+#define TPS65910_OP_REG_SEL_1_1_3			(0x2E)	/* 1.1375 V */
+#define TPS65910_OP_REG_SEL_1_2_0			(0x33)	/* 1.2000 V */
+#define TPS65910_OP_REG_SEL_1_2_6			(0x38)	/* 1.2625 V */
+#define TPS65910_OP_REG_SEL_1_3_2_5			(0x3D)	/* 1.3250 V */
+
+/* Device control register . (DEVCTRL_REG) */
+#define TPS65910_DEVCTRL_REG_SR_CTL_I2C_MASK		(0x1 << 4)
+#define TPS65910_DEVCTRL_REG_SR_CTL_I2C_SEL_SR_I2C	(0x0 << 4)
+#define TPS65910_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C	(0x1 << 4)
+
+int tps65910_set_i2c_control(void);
+int tps65910_voltage_update(unsigned int module, unsigned char vddx_op_vol_sel);
+#endif	/* __POWER_TPS65910_H__ */
diff --git a/spl/Makefile b/spl/Makefile
index 174d0a7fc4..b366ac2bb7 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -87,7 +87,8 @@ LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/libspi_flash.o
 LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o
 LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o
 LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o
-LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o
+LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o \
+	drivers/power/pmic/libpmic.o
 LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o
 LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/libonenand.o
 LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/libdma.o