diff options
| -rw-r--r-- | Makefile | 4 | ||||
| -rw-r--r-- | board/stxssa/stxssa.c | 9 | ||||
| -rw-r--r-- | cpu/mpc512x/fec.c | 8 | ||||
| -rw-r--r-- | cpu/mpc512x/fec.h | 7 | ||||
| -rw-r--r-- | include/configs/stxssa.h | 2 | ||||
| -rw-r--r-- | include/image.h | 1 | ||||
| -rw-r--r-- | nand_spl/board/amcc/bamboo/Makefile | 6 |
7 files changed, 25 insertions, 12 deletions
@@ -22,9 +22,9 @@ # VERSION = 1 -PATCHLEVEL = 2 +PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc1 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c index 5882124150..9a2bfbef8e 100644 --- a/board/stxssa/stxssa.c +++ b/board/stxssa/stxssa.c @@ -378,9 +378,12 @@ static struct pci_config_table pci_stxgp3_config_table[] = { #endif -static struct pci_controller hose = { +static struct pci_controller hose[] = { #ifndef CONFIG_PCI_PNP - config_table: pci_stxgp3_config_table, + { config_table: pci_stxgp3_config_table,}, +#ifdef CONFIG_MPC85XX_PCI2 + {}, +#endif #endif }; @@ -393,6 +396,6 @@ pci_init_board(void) #ifdef CONFIG_PCI extern void pci_mpc85xx_init(struct pci_controller *hose); - pci_mpc85xx_init(&hose); + pci_mpc85xx_init(hose); #endif /* CONFIG_PCI */ } diff --git a/cpu/mpc512x/fec.c b/cpu/mpc512x/fec.c index 8104576177..675b7a2e09 100644 --- a/cpu/mpc512x/fec.c +++ b/cpu/mpc512x/fec.c @@ -32,7 +32,7 @@ int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * re int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); -static uchar rx_buff[FEC_MAX_PKT_SIZE]; +static uchar rx_buff[FEC_BUFFER_SIZE]; static int rx_buff_idx = 0; /********************************************************************/ @@ -237,8 +237,8 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) /* Set Opcode/Pause Duration Register */ fec->eth->op_pause = 0x00010020; - /* Frame length=1518; MII mode */ - fec->eth->r_cntrl = 0x05ee0024; + /* Frame length=1522; MII mode */ + fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24; /* Half-duplex, heartbeat disabled */ fec->eth->x_cntrl = 0x00000000; @@ -248,7 +248,7 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) /* Setup recv fifo start and buff size */ fec->eth->r_fstart = 0x500; - fec->eth->r_buff_size = 0x5e0; + fec->eth->r_buff_size = FEC_BUFFER_SIZE; /* Setup BD base addresses */ fec->eth->r_des_start = (uint32)fec->bdBase->rbd; diff --git a/cpu/mpc512x/fec.h b/cpu/mpc512x/fec.h index d2d877aa52..9c38502870 100644 --- a/cpu/mpc512x/fec.h +++ b/cpu/mpc512x/fec.h @@ -164,10 +164,13 @@ typedef enum { #define FEC_RBD_NUM 32 /* The user can adjust this value */ /* packet size limit */ -#define FEC_MAX_PKT_SIZE 1536 +#define FEC_MAX_FRAME_LEN 1522 /* recommended default value */ + +/* Buffer size must be evenly divisible by 16 */ +#define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf)) typedef struct { - uint8 frame[FEC_MAX_PKT_SIZE]; + uint8 frame[FEC_BUFFER_SIZE]; } mpc512x_frame; typedef struct { diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index f32ff67d9f..b41dafaf98 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -230,7 +230,7 @@ #define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ #if defined(CONFIG_PCI) /* PCI Ethernet card */ - +#define CONFIG_MPC85XX_PCI2 1 #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/image.h b/include/image.h index 2f575fd2d7..432fa22393 100644 --- a/include/image.h +++ b/include/image.h @@ -77,6 +77,7 @@ #define IH_CPU_NIOS2 15 /* Nios-II */ #define IH_CPU_BLACKFIN 16 /* Blackfin */ #define IH_CPU_AVR32 17 /* AVR32 */ +#define IH_CPU_ST200 18 /* STMicroelectronics ST200 */ /* * Image Types diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile index 0df86f99d4..8b5461dcf4 100644 --- a/nand_spl/board/amcc/bamboo/Makefile +++ b/nand_spl/board/amcc/bamboo/Makefile @@ -84,6 +84,12 @@ $(obj)nand_ecc.c: @rm -f $(obj)nand_ecc.c ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c +ifneq ($(OBJTREE), $(SRCTREE)) +$(obj)sdram.c: + @rm -f $(obj)sdram.c + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/sdram.c $(obj)sdram.c +endif + ######################################################################### $(obj)%.o: $(obj)%.S |
