diff options
| -rw-r--r-- | arch/powerpc/cpu/mpc86xx/cpu_init.c | 28 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc86xx/start.S | 69 | ||||
| -rw-r--r-- | include/configs/MPC8641HPCN.h | 123 | ||||
| -rw-r--r-- | include/mpc86xx.h | 1 |
4 files changed, 142 insertions, 79 deletions
diff --git a/arch/powerpc/cpu/mpc86xx/cpu_init.c b/arch/powerpc/cpu/mpc86xx/cpu_init.c index 802202478a..0375df26f9 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc86xx/cpu_init.c @@ -35,7 +35,6 @@ #include <asm/mp.h> extern void srio_init(void); -void setup_bats(void); DECLARE_GLOBAL_DATA_PTR; @@ -91,33 +90,6 @@ int cpu_init_r(void) return 0; } -/* Set up BAT registers */ -void setup_bats(void) -{ -#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L) - write_bat(DBAT0, CONFIG_SYS_DBAT0U, CONFIG_SYS_DBAT0L); -#endif -#if defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L) - write_bat(IBAT0, CONFIG_SYS_IBAT0U, CONFIG_SYS_IBAT0L); -#endif - write_bat(DBAT1, CONFIG_SYS_DBAT1U, CONFIG_SYS_DBAT1L); - write_bat(IBAT1, CONFIG_SYS_IBAT1U, CONFIG_SYS_IBAT1L); - write_bat(DBAT2, CONFIG_SYS_DBAT2U, CONFIG_SYS_DBAT2L); - write_bat(IBAT2, CONFIG_SYS_IBAT2U, CONFIG_SYS_IBAT2L); - write_bat(DBAT3, CONFIG_SYS_DBAT3U, CONFIG_SYS_DBAT3L); - write_bat(IBAT3, CONFIG_SYS_IBAT3U, CONFIG_SYS_IBAT3L); - write_bat(DBAT4, CONFIG_SYS_DBAT4U, CONFIG_SYS_DBAT4L); - write_bat(IBAT4, CONFIG_SYS_IBAT4U, CONFIG_SYS_IBAT4L); - write_bat(DBAT5, CONFIG_SYS_DBAT5U, CONFIG_SYS_DBAT5L); - write_bat(IBAT5, CONFIG_SYS_IBAT5U, CONFIG_SYS_IBAT5L); - write_bat(DBAT6, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L); - write_bat(IBAT6, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L); - write_bat(DBAT7, CONFIG_SYS_DBAT7U, CONFIG_SYS_DBAT7L); - write_bat(IBAT7, CONFIG_SYS_IBAT7U, CONFIG_SYS_IBAT7L); - - return; -} - #ifdef CONFIG_ADDR_MAP /* Initialize address mapping array */ void init_addr_map(void) diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S index 32896d49e1..ef80ecf6e5 100644 --- a/arch/powerpc/cpu/mpc86xx/start.S +++ b/arch/powerpc/cpu/mpc86xx/start.S @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007 Freescale Semiconductor. + * Copyright 2004, 2007, 2011 Freescale Semiconductor. * Srikanth Srinivasan <srikanth.srinivaan@freescale.com> * * See file CREDITS for list of people who contributed to this @@ -322,6 +322,73 @@ invalidate_bats: sync blr +#define CONFIG_BAT_PAIR(n) \ + lis r4, CONFIG_SYS_IBAT##n##L@h; \ + ori r4, r4, CONFIG_SYS_IBAT##n##L@l; \ + lis r3, CONFIG_SYS_IBAT##n##U@h; \ + ori r3, r3, CONFIG_SYS_IBAT##n##U@l; \ + mtspr IBAT##n##L, r4; \ + mtspr IBAT##n##U, r3; \ + lis r4, CONFIG_SYS_DBAT##n##L@h; \ + ori r4, r4, CONFIG_SYS_DBAT##n##L@l; \ + lis r3, CONFIG_SYS_DBAT##n##U@h; \ + ori r3, r3, CONFIG_SYS_DBAT##n##U@l; \ + mtspr DBAT##n##L, r4; \ + mtspr DBAT##n##U, r3; + +/* + * setup_bats: + * + * Set up the final BAT registers now that setup is done. + * + * Assumes that: + * 1) Address translation is enabled upon entry + * 2) The boot rom is still accessible via 1:1 translation + */ + .globl setup_bats +setup_bats: + mflr r5 + sync + + /* + * When we disable address translation, we will get 1:1 (VA==PA) + * translation. The only place we know for sure is safe for that is + * the bootrom where we originally started out. Pop back into there. + */ + lis r4, CONFIG_SYS_MONITOR_BASE_EARLY@h + ori r4, r4, CONFIG_SYS_MONITOR_BASE_EARLY@l + addi r4, r4, trans_disabled - _start + EXC_OFF_SYS_RESET + + /* disable address translation */ + mfmsr r3 + rlwinm r3, r3, 0, 28, 25 + mtspr SRR0, r4 + mtspr SRR1, r3 + rfi + +trans_disabled: +#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L) \ + && defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L) + CONFIG_BAT_PAIR(0) +#endif + CONFIG_BAT_PAIR(1) + CONFIG_BAT_PAIR(2) + CONFIG_BAT_PAIR(3) + CONFIG_BAT_PAIR(4) + CONFIG_BAT_PAIR(5) + CONFIG_BAT_PAIR(6) + CONFIG_BAT_PAIR(7) + + sync + isync + + /* Turn translation back on and return */ + mfmsr r3 + ori r3, r3, (MSR_IR | MSR_DR) + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r3 + rfi + /* * early_bats: * diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 84d95bb7c6..93b360a2ba 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -99,9 +99,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * when 36-bit is enabled. When 36-bit is not enabled, these bits are 0. */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f00000000ULL +#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f #else -#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0 +#define CONFIG_SYS_PHYS_ADDR_HIGH 0x00000000 #endif /* @@ -114,14 +114,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Physical addresses */ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf -#define CONFIG_SYS_CCSRBAR_PHYS (CONFIG_SYS_CCSRBAR_PHYS_LOW \ - | ((u64)CONFIG_SYS_CCSRBAR_PHYS_HIGH << 32)) -#else -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW -#endif +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH CONFIG_SYS_PHYS_ADDR_HIGH +#define CONFIG_SYS_CCSRBAR_PHYS \ + PAIRED_PHYS_TO_PHYS(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH) #define CONFIG_HWCONFIG /* use hwconfig to control memory interleaving */ @@ -181,8 +177,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_FLASH_BASE 0xef800000 /* start of FLASH 8M */ -#define CONFIG_SYS_FLASH_BASE_PHYS (CONFIG_SYS_FLASH_BASE \ - | CONFIG_SYS_PHYS_ADDR_HIGH) +#define CONFIG_SYS_FLASH_BASE_PHYS_LOW CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_FLASH_BASE_PHYS \ + PAIRED_PHYS_TO_PHYS(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} @@ -204,12 +202,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * required for the smallest BAT mapping, so there's a 64k hole. */ #define CONFIG_SYS_LBC_BASE 0xffde0000 -#define CONFIG_SYS_LBC_BASE_PHYS (CONFIG_SYS_LBC_BASE \ - | CONFIG_SYS_PHYS_ADDR_HIGH) +#define CONFIG_SYS_LBC_BASE_PHYS_LOW CONFIG_SYS_LBC_BASE #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE (CONFIG_SYS_LBC_BASE + 0x00010000) -#define PIXIS_BASE_PHYS (CONFIG_SYS_LBC_BASE_PHYS + 0x00010000) +#define PIXIS_BASE_PHYS_LOW (CONFIG_SYS_LBC_BASE_PHYS_LOW + 0x00010000) +#define PIXIS_BASE_PHYS PAIRED_PHYS_TO_PHYS(PIXIS_BASE_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) #define PIXIS_SIZE 0x00008000 /* 32k */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ @@ -315,10 +314,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CONFIG_SYS_SRIO1_MEM_BASE 0x80000000 /* base address */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_SRIO1_MEM_PHYS 0x0000000c00000000ULL +#define CONFIG_SYS_SRIO1_MEM_PHYS_LOW 0x00000000 +#define CONFIG_SYS_SRIO1_MEM_PHYS_HIGH 0x0000000c #else -#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BASE +#define CONFIG_SYS_SRIO1_MEM_PHYS_LOW CONFIG_SYS_SRIO1_MEM_BASE +#define CONFIG_SYS_SRIO1_MEM_PHYS_HIGH 0x00000000 #endif +#define CONFIG_SYS_SRIO1_MEM_PHYS \ + PAIRED_PHYS_TO_PHYS(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ + CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 128M */ /* @@ -330,16 +334,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0x0000000c00000000ULL +#define CONFIG_SYS_PCIE1_MEM_PHYS_LOW 0x00000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS_HIGH 0x0000000c #else #define CONFIG_SYS_PCIE1_MEM_BUS CONFIG_SYS_PCIE1_MEM_VIRT -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_VIRT +#define CONFIG_SYS_PCIE1_MEM_PHYS_LOW CONFIG_SYS_PCIE1_MEM_VIRT +#define CONFIG_SYS_PCIE1_MEM_PHYS_HIGH 0x00000000 #endif +#define CONFIG_SYS_PCIE1_MEM_PHYS \ + PAIRED_PHYS_TO_PHYS(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ + CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE1_IO_PHYS (CONFIG_SYS_PCIE1_IO_VIRT \ - | CONFIG_SYS_PHYS_ADDR_HIGH) +#define CONFIG_SYS_PCIE1_IO_PHYS_LOW CONFIG_SYS_PCIE1_IO_VIRT +#define CONFIG_SYS_PCIE1_IO_PHYS \ + PAIRED_PHYS_TO_PHYS(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64K */ #ifdef CONFIG_PHYS_64BIT @@ -355,12 +366,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif #define CONFIG_SYS_PCIE2_MEM_VIRT (CONFIG_SYS_PCIE1_MEM_VIRT \ + CONFIG_SYS_PCIE1_MEM_SIZE) +#define CONFIG_SYS_PCIE2_MEM_PHYS_LOW (CONFIG_SYS_PCIE1_MEM_PHYS_LOW \ + + CONFIG_SYS_PCIE1_MEM_SIZE) +#define CONFIG_SYS_PCIE2_MEM_PHYS_HIGH CONFIG_SYS_PCIE1_MEM_PHYS_HIGH #define CONFIG_SYS_PCIE2_MEM_PHYS (CONFIG_SYS_PCIE1_MEM_PHYS \ + CONFIG_SYS_PCIE1_MEM_SIZE) #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE2_IO_VIRT (CONFIG_SYS_PCIE1_IO_VIRT \ + CONFIG_SYS_PCIE1_IO_SIZE) +#define CONFIG_SYS_PCIE2_IO_PHYS_LOW (CONFIG_SYS_PCIE1_IO_PHYS_LOW \ + + CONFIG_SYS_PCIE1_IO_SIZE) #define CONFIG_SYS_PCIE2_IO_PHYS (CONFIG_SYS_PCIE1_IO_PHYS \ + CONFIG_SYS_PCIE1_IO_SIZE) #define CONFIG_SYS_PCIE2_IO_SIZE CONFIG_SYS_PCIE1_IO_SIZE @@ -455,21 +471,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* CONFIG_TSEC_ENET */ -/* Contort an addr into the format needed for BATs */ -#ifdef CONFIG_PHYS_64BIT -#define BAT_PHYS_ADDR(x) ((unsigned long) \ - ((x & 0x00000000ffffffffULL) | \ - ((x & 0x0000000e00000000ULL) >> 24) | \ - ((x & 0x0000000100000000ULL) >> 30))) -#else -#define BAT_PHYS_ADDR(x) (x) -#endif - -/* Put high physical address bits into the BAT format */ +#ifdef CONFIG_PHYS_64BIT #define PHYS_HIGH_TO_BXPN(x) ((x & 0x0000000e) << 8) #define PHYS_HIGH_TO_BX(x) ((x & 0x00000001) << 2) +/* Put physical address into the BAT format */ +#define BAT_PHYS_ADDR(low, high) \ + (low | PHYS_HIGH_TO_BXPN(high) | PHYS_HIGH_TO_BX(high)) +/* Convert high/low pairs to actual 64-bit value */ +#define PAIRED_PHYS_TO_PHYS(low, high) (low | ((u64)high << 32)) +#else +/* 32-bit systems just ignore the "high" bits */ +#define BAT_PHYS_ADDR(low, high) (low) +#define PAIRED_PHYS_TO_PHYS(low, high) (low) +#endif + /* * BAT0 DDR */ @@ -479,12 +496,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * BAT1 LBC (PIXIS/CF) */ -#define CONFIG_SYS_DBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \ +#define CONFIG_SYS_DBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT | \ BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT1U (CONFIG_SYS_LBC_BASE | BATU_BL_128K \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \ +#define CONFIG_SYS_IBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) \ | BATL_PP_RW | BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U @@ -494,40 +513,40 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * BAT2 Rapidio Memory */ #ifdef CONFIG_PCI -#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \ +#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ + CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \ +#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ + CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U #else /* CONFIG_RIO */ -#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \ +#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ + CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT | \ BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \ +#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ + CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U #endif /* * BAT3 CCSR Space - * This BAT is used early; don't use any macros with ULL - use HIGH/LOW pairs - * instead. The assembler chokes on ULL. */ -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_CCSRBAR_PHYS_LOW \ - | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ - | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ +#define CONFIG_SYS_DBAT3L (BAT_PHYS_ADDR(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS \ | BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR_PHYS_LOW \ - | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ - | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ +#define CONFIG_SYS_IBAT3L (BAT_PHYS_ADDR(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U @@ -545,12 +564,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * BAT4 PCIE1_IO and PCIE2_IO */ -#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \ +#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \ +#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U @@ -565,12 +586,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * BAT6 FLASH */ -#define CONFIG_SYS_DBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ +#define CONFIG_SYS_DBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT6U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS \ | BATU_VP) -#define CONFIG_SYS_IBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ +#define CONFIG_SYS_IBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ + CONFIG_SYS_PHYS_ADDR_HIGH) \ | BATL_PP_RW | BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U diff --git a/include/mpc86xx.h b/include/mpc86xx.h index eb85d60cad..31e83f2cc9 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -84,6 +84,7 @@ static __inline__ unsigned long get_l2cr (void) } void setup_ddr_bat(phys_addr_t dram_size); +extern void setup_bats(void); #endif /* _ASMLANGUAGE */ #endif /* __MPC86xx_H__ */ |
