diff options
| -rw-r--r-- | include/configs/acadia.h | 62 | ||||
| -rw-r--r-- | include/configs/adsvix.h | 17 | ||||
| -rw-r--r-- | include/configs/aev.h | 49 | ||||
| -rw-r--r-- | include/configs/alpr.h | 45 | ||||
| -rw-r--r-- | include/configs/armadillo.h | 8 | ||||
| -rw-r--r-- | include/configs/assabet.h | 15 | ||||
| -rw-r--r-- | include/configs/at91rm9200dk.h | 28 | ||||
| -rw-r--r-- | include/configs/atc.h | 24 | ||||
| -rw-r--r-- | include/configs/atstk1002.h | 57 |
9 files changed, 160 insertions, 145 deletions
diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 517d130d5c..3f5d025ac8 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -123,10 +123,8 @@ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define _CFG_CMD_INCLUDE (CFG_CMD_ALL) #else #define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */ -#define _CFG_CMD_INCLUDE ((CFG_CMD_ALL) & ~(CFG_CMD_FLASH | CFG_CMD_IMLS)) #endif #ifdef CFG_ENV_IS_IN_FLASH @@ -301,27 +299,39 @@ #define CONFIG_SUPPORT_VFAT -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & _CFG_CMD_INCLUDE) | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DTT | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_USB + +/* + * No NOR on Acadia when NAND-booting + */ +#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#endif + + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -330,7 +340,7 @@ *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -373,7 +383,7 @@ */ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405EZ CPU */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ #endif @@ -489,7 +499,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h index c4108912a6..0d64013b21 100644 --- a/include/configs/adsvix.h +++ b/include/configs/adsvix.h @@ -68,10 +68,19 @@ #define CONFIG_DOS_PARTITION 1 -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_NET) | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_IDE | CFG_CMD_PCMCIA) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PCMCIA + +#undef CONFIG_CMD_NET + #undef CONFIG_SHOW_BOOT_PROGRESS @@ -162,7 +171,7 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ /* #define CONFIG_INITRD_TAG 1 */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/aev.h b/include/configs/aev.h index f6f530cedb..ecd84d3e20 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -44,11 +44,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -98,27 +93,26 @@ #define CFG_CMD_POST_DIAG 0 #endif + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - CFG_CMD_PCI | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_POST +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -324,7 +318,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -343,6 +337,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, * which is normally part of the default commands (CFV_CMD_DFL) diff --git a/include/configs/alpr.h b/include/configs/alpr.h index df057d9c95..27f2831b52 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -210,25 +210,28 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_FPGA | \ - CFG_CMD_NAND | \ - CFG_CMD_REGINFO) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -237,7 +240,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -358,7 +361,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h index 9a1c5596b7..7c77fa7311 100644 --- a/include/configs/armadillo.h +++ b/include/configs/armadillo.h @@ -73,10 +73,12 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200" diff --git a/include/configs/assabet.h b/include/configs/assabet.h index 1a69ebe0da..7c6a65ac0a 100644 --- a/include/configs/assabet.h +++ b/include/configs/assabet.h @@ -66,18 +66,23 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySA0,115200n8 root=/dev/nfs ip=bootp" #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 8fad55d81c..db57dc11f1 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -97,18 +97,22 @@ #define CONFIG_BOOTDELAY 3 /* #define CONFIG_ENV_OVERWRITE 1 */ -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | CFG_CMD_MII |\ - CFG_CMD_DHCP ) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_IMI | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC | \ - CFG_CMD_LOADS )) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_LOADS + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/atc.h b/include/configs/atc.h index bf6c1709d9..cb4e7472ec 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -126,25 +126,27 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_DATE | \ - CFG_CMD_IDE) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_DATE +#define CONFIG_CMD_IDE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CONFIG_DOS_PARTITION /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -285,7 +287,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index beaf3851dc..90fe8a55c5 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -111,44 +111,25 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \ | CONFIG_BOOTP_GATEWAY) -#define CONFIG_COMMANDS (CFG_CMD_BDI \ - | CFG_CMD_LOADS \ - | CFG_CMD_LOADB \ - | CFG_CMD_IMI \ - /* | CFG_CMD_CACHE */ \ - | CFG_CMD_FLASH \ - | CFG_CMD_MEMORY \ - | CFG_CMD_NET \ - | CFG_CMD_ENV \ - /* | CFG_CMD_IRQ */ \ - | CFG_CMD_BOOTD \ - | CFG_CMD_CONSOLE \ - /* | CFG_CMD_EEPROM */ \ - | CFG_CMD_ASKENV \ - | CFG_CMD_RUN \ - | CFG_CMD_ECHO \ - /* | CFG_CMD_I2C */ \ - | CFG_CMD_REGINFO \ - /* | CFG_CMD_DATE */ \ - | CFG_CMD_DHCP \ - /* | CFG_CMD_AUTOSCRIPT */ \ - /* | CFG_CMD_MII */ \ - | CFG_CMD_MISC \ - /* | CFG_CMD_SDRAM */ \ - /* | CFG_CMD_DIAG */ \ - /* | CFG_CMD_HWFLOW */ \ - /* | CFG_CMD_SAVES */ \ - /* | CFG_CMD_SPI */ \ - /* | CFG_CMD_PING */ \ - | CFG_CMD_MMC \ - | CFG_CMD_FAT \ - | CFG_CMD_IMLS \ - /* | CFG_CMD_ITEST */ \ - | CFG_CMD_EXT2 \ - | CFG_CMD_JFFS2 \ - ) - -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + + #define CONFIG_ATMEL_USART 1 #define CONFIG_MACB 1 |
