net: Move driver-model code into its own file

Every other uclass is in its own file. Create a new eth-uclass.c file and
move the driver-model code into it, so that networking is consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

1 files changed, 0 insertions, 543 deletions

diff --git a/net/eth.c b/net/eth.c
index 907eb118ff..bdcd6eaafc 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -8,14 +8,10 @@
 
 #include <common.h>
 #include <command.h>
-#include <dm.h>
 #include <environment.h>
 #include <net.h>
-#include <miiphy.h>
 #include <phy.h>
 #include <asm/errno.h>
-#include <dm/device-internal.h>
-#include <dm/uclass-internal.h>
 #include "eth_internal.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -31,544 +27,6 @@ static int __def_eth_init(bd_t *bis)
 int cpu_eth_init(bd_t *bis) __attribute__((weak, alias("__def_eth_init")));
 int board_eth_init(bd_t *bis) __attribute__((weak, alias("__def_eth_init")));
 
-#ifdef CONFIG_DM_ETH
-/**
- * struct eth_device_priv - private structure for each Ethernet device
- *
- * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
- */
-struct eth_device_priv {
-	enum eth_state_t state;
-};
-
-/**
- * struct eth_uclass_priv - The structure attached to the uclass itself
- *
- * @current: The Ethernet device that the network functions are using
- */
-struct eth_uclass_priv {
-	struct udevice *current;
-};
-
-/* eth_errno - This stores the most recent failure code from DM functions */
-static int eth_errno;
-
-static struct eth_uclass_priv *eth_get_uclass_priv(void)
-{
-	struct uclass *uc;
-
-	uclass_get(UCLASS_ETH, &uc);
-	assert(uc);
-	return uc->priv;
-}
-
-void eth_set_current_to_next(void)
-{
-	struct eth_uclass_priv *uc_priv;
-
-	uc_priv = eth_get_uclass_priv();
-	if (uc_priv->current)
-		uclass_next_device(&uc_priv->current);
-	if (!uc_priv->current)
-		uclass_first_device(UCLASS_ETH, &uc_priv->current);
-}
-
-/*
- * Typically this will simply return the active device.
- * In the case where the most recent active device was unset, this will attempt
- * to return the first device. If that device doesn't exist or fails to probe,
- * this function will return NULL.
- */
-struct udevice *eth_get_dev(void)
-{
-	struct eth_uclass_priv *uc_priv;
-
-	uc_priv = eth_get_uclass_priv();
-	if (!uc_priv->current)
-		eth_errno = uclass_first_device(UCLASS_ETH,
-				    &uc_priv->current);
-	return uc_priv->current;
-}
-
-/*
- * Typically this will just store a device pointer.
- * In case it was not probed, we will attempt to do so.
- * dev may be NULL to unset the active device.
- */
-void eth_set_dev(struct udevice *dev)
-{
-	if (dev && !device_active(dev)) {
-		eth_errno = device_probe(dev);
-		if (eth_errno)
-			dev = NULL;
-	}
-
-	eth_get_uclass_priv()->current = dev;
-}
-
-/*
- * Find the udevice that either has the name passed in as devname or has an
- * alias named devname.
- */
-struct udevice *eth_get_dev_by_name(const char *devname)
-{
-	int seq = -1;
-	char *endp = NULL;
-	const char *startp = NULL;
-	struct udevice *it;
-	struct uclass *uc;
-	int len = strlen("eth");
-
-	/* Must be longer than 3 to be an alias */
-	if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
-		startp = devname + len;
-		seq = simple_strtoul(startp, &endp, 10);
-	}
-
-	uclass_get(UCLASS_ETH, &uc);
-	uclass_foreach_dev(it, uc) {
-		/*
-		 * We need the seq to be valid, so try to probe it.
-		 * If the probe fails, the seq will not match since it will be
-		 * -1 instead of what we are looking for.
-		 * We don't care about errors from probe here. Either they won't
-		 * match an alias or it will match a literal name and we'll pick
-		 * up the error when we try to probe again in eth_set_dev().
-		 */
-		if (device_probe(it))
-			continue;
-		/* Check for the name or the sequence number to match */
-		if (strcmp(it->name, devname) == 0 ||
-		    (endp > startp && it->seq == seq))
-			return it;
-	}
-
-	return NULL;
-}
-
-unsigned char *eth_get_ethaddr(void)
-{
-	struct eth_pdata *pdata;
-
-	if (eth_get_dev()) {
-		pdata = eth_get_dev()->platdata;
-		return pdata->enetaddr;
-	}
-
-	return NULL;
-}
-
-/* Set active state without calling start on the driver */
-int eth_init_state_only(void)
-{
-	struct udevice *current;
-	struct eth_device_priv *priv;
-
-	current = eth_get_dev();
-	if (!current || !device_active(current))
-		return -EINVAL;
-
-	priv = current->uclass_priv;
-	priv->state = ETH_STATE_ACTIVE;
-
-	return 0;
-}
-
-/* Set passive state without calling stop on the driver */
-void eth_halt_state_only(void)
-{
-	struct udevice *current;
-	struct eth_device_priv *priv;
-
-	current = eth_get_dev();
-	if (!current || !device_active(current))
-		return;
-
-	priv = current->uclass_priv;
-	priv->state = ETH_STATE_PASSIVE;
-}
-
-int eth_get_dev_index(void)
-{
-	if (eth_get_dev())
-		return eth_get_dev()->seq;
-	return -1;
-}
-
-static int eth_write_hwaddr(struct udevice *dev)
-{
-	struct eth_pdata *pdata = dev->platdata;
-	int ret = 0;
-
-	if (!dev || !device_active(dev))
-		return -EINVAL;
-
-	/* seq is valid since the device is active */
-	if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
-		if (!is_valid_ethaddr(pdata->enetaddr)) {
-			printf("\nError: %s address %pM illegal value\n",
-			       dev->name, pdata->enetaddr);
-			return -EINVAL;
-		}
-
-		/*
-		 * Drivers are allowed to decide not to implement this at
-		 * run-time. E.g. Some devices may use it and some may not.
-		 */
-		ret = eth_get_ops(dev)->write_hwaddr(dev);
-		if (ret == -ENOSYS)
-			ret = 0;
-		if (ret)
-			printf("\nWarning: %s failed to set MAC address\n",
-			       dev->name);
-	}
-
-	return ret;
-}
-
-static int on_ethaddr(const char *name, const char *value, enum env_op op,
-	int flags)
-{
-	int index;
-	int retval;
-	struct udevice *dev;
-
-	/* look for an index after "eth" */
-	index = simple_strtoul(name + 3, NULL, 10);
-
-	retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
-	if (!retval) {
-		struct eth_pdata *pdata = dev->platdata;
-		switch (op) {
-		case env_op_create:
-		case env_op_overwrite:
-			eth_parse_enetaddr(value, pdata->enetaddr);
-			break;
-		case env_op_delete:
-			memset(pdata->enetaddr, 0, 6);
-		}
-	}
-
-	return 0;
-}
-U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
-
-int eth_init(void)
-{
-	char *ethact = getenv("ethact");
-	char *ethrotate = getenv("ethrotate");
-	struct udevice *current = NULL;
-	struct udevice *old_current;
-	int ret = -ENODEV;
-
-	/*
-	 * When 'ethrotate' variable is set to 'no' and 'ethact' variable
-	 * is already set to an ethernet device, we should stick to 'ethact'.
-	 */
-	if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
-		if (ethact) {
-			current = eth_get_dev_by_name(ethact);
-			if (!current)
-				return -EINVAL;
-		}
-	}
-
-	if (!current) {
-		current = eth_get_dev();
-		if (!current) {
-			printf("No ethernet found.\n");
-			return -ENODEV;
-		}
-	}
-
-	old_current = current;
-	do {
-		if (current) {
-			debug("Trying %s\n", current->name);
-
-			if (device_active(current)) {
-				ret = eth_get_ops(current)->start(current);
-				if (ret >= 0) {
-					struct eth_device_priv *priv =
-						current->uclass_priv;
-
-					priv->state = ETH_STATE_ACTIVE;
-					return 0;
-				}
-			} else {
-				ret = eth_errno;
-			}
-
-			debug("FAIL\n");
-		} else {
-			debug("PROBE FAIL\n");
-		}
-
-		/*
-		 * If ethrotate is enabled, this will change "current",
-		 * otherwise we will drop out of this while loop immediately
-		 */
-		eth_try_another(0);
-		/* This will ensure the new "current" attempted to probe */
-		current = eth_get_dev();
-	} while (old_current != current);
-
-	return ret;
-}
-
-void eth_halt(void)
-{
-	struct udevice *current;
-	struct eth_device_priv *priv;
-
-	current = eth_get_dev();
-	if (!current || !device_active(current))
-		return;
-
-	eth_get_ops(current)->stop(current);
-	priv = current->uclass_priv;
-	priv->state = ETH_STATE_PASSIVE;
-}
-
-int eth_is_active(struct udevice *dev)
-{
-	struct eth_device_priv *priv;
-
-	if (!dev || !device_active(dev))
-		return 0;
-
-	priv = dev_get_uclass_priv(dev);
-	return priv->state == ETH_STATE_ACTIVE;
-}
-
-int eth_send(void *packet, int length)
-{
-	struct udevice *current;
-	int ret;
-
-	current = eth_get_dev();
-	if (!current)
-		return -ENODEV;
-
-	if (!device_active(current))
-		return -EINVAL;
-
-	ret = eth_get_ops(current)->send(current, packet, length);
-	if (ret < 0) {
-		/* We cannot completely return the error at present */
-		debug("%s: send() returned error %d\n", __func__, ret);
-	}
-	return ret;
-}
-
-int eth_rx(void)
-{
-	struct udevice *current;
-	uchar *packet;
-	int flags;
-	int ret;
-	int i;
-
-	current = eth_get_dev();
-	if (!current)
-		return -ENODEV;
-
-	if (!device_active(current))
-		return -EINVAL;
-
-	/* Process up to 32 packets at one time */
-	flags = ETH_RECV_CHECK_DEVICE;
-	for (i = 0; i < 32; i++) {
-		ret = eth_get_ops(current)->recv(current, flags, &packet);
-		flags = 0;
-		if (ret > 0)
-			net_process_received_packet(packet, ret);
-		if (ret >= 0 && eth_get_ops(current)->free_pkt)
-			eth_get_ops(current)->free_pkt(current, packet, ret);
-		if (ret <= 0)
-			break;
-	}
-	if (ret == -EAGAIN)
-		ret = 0;
-	if (ret < 0) {
-		/* We cannot completely return the error at present */
-		debug("%s: recv() returned error %d\n", __func__, ret);
-	}
-	return ret;
-}
-
-int eth_initialize(void)
-{
-	int num_devices = 0;
-	struct udevice *dev;
-
-	eth_common_init();
-
-	/*
-	 * Devices need to write the hwaddr even if not started so that Linux
-	 * will have access to the hwaddr that u-boot stored for the device.
-	 * This is accomplished by attempting to probe each device and calling
-	 * their write_hwaddr() operation.
-	 */
-	uclass_first_device(UCLASS_ETH, &dev);
-	if (!dev) {
-		printf("No ethernet found.\n");
-		bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
-	} else {
-		char *ethprime = getenv("ethprime");
-		struct udevice *prime_dev = NULL;
-
-		if (ethprime)
-			prime_dev = eth_get_dev_by_name(ethprime);
-		if (prime_dev) {
-			eth_set_dev(prime_dev);
-			eth_current_changed();
-		} else {
-			eth_set_dev(NULL);
-		}
-
-		bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
-		do {
-			if (num_devices)
-				printf(", ");
-
-			printf("eth%d: %s", dev->seq, dev->name);
-
-			if (ethprime && dev == prime_dev)
-				printf(" [PRIME]");
-
-			eth_write_hwaddr(dev);
-
-			uclass_next_device(&dev);
-			num_devices++;
-		} while (dev);
-
-		putc('\n');
-	}
-
-	return num_devices;
-}
-
-static int eth_post_bind(struct udevice *dev)
-{
-	if (strchr(dev->name, ' ')) {
-		printf("\nError: eth device name \"%s\" has a space!\n",
-		       dev->name);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int eth_pre_unbind(struct udevice *dev)
-{
-	/* Don't hang onto a pointer that is going away */
-	if (dev == eth_get_uclass_priv()->current)
-		eth_set_dev(NULL);
-
-	return 0;
-}
-
-static int eth_post_probe(struct udevice *dev)
-{
-	struct eth_device_priv *priv = dev->uclass_priv;
-	struct eth_pdata *pdata = dev->platdata;
-	unsigned char env_enetaddr[6];
-
-#if defined(CONFIG_NEEDS_MANUAL_RELOC)
-	struct eth_ops *ops = eth_get_ops(dev);
-	static int reloc_done;
-
-	if (!reloc_done) {
-		if (ops->start)
-			ops->start += gd->reloc_off;
-		if (ops->send)
-			ops->send += gd->reloc_off;
-		if (ops->recv)
-			ops->recv += gd->reloc_off;
-		if (ops->free_pkt)
-			ops->free_pkt += gd->reloc_off;
-		if (ops->stop)
-			ops->stop += gd->reloc_off;
-#ifdef CONFIG_MCAST_TFTP
-		if (ops->mcast)
-			ops->mcast += gd->reloc_off;
-#endif
-		if (ops->write_hwaddr)
-			ops->write_hwaddr += gd->reloc_off;
-		if (ops->read_rom_hwaddr)
-			ops->read_rom_hwaddr += gd->reloc_off;
-
-		reloc_done++;
-	}
-#endif
-
-	priv->state = ETH_STATE_INIT;
-
-	/* Check if the device has a MAC address in ROM */
-	if (eth_get_ops(dev)->read_rom_hwaddr)
-		eth_get_ops(dev)->read_rom_hwaddr(dev);
-
-	eth_getenv_enetaddr_by_index("eth", dev->seq, env_enetaddr);
-	if (!is_zero_ethaddr(env_enetaddr)) {
-		if (!is_zero_ethaddr(pdata->enetaddr) &&
-		    memcmp(pdata->enetaddr, env_enetaddr, 6)) {
-			printf("\nWarning: %s MAC addresses don't match:\n",
-			       dev->name);
-			printf("Address in SROM is         %pM\n",
-			       pdata->enetaddr);
-			printf("Address in environment is  %pM\n",
-			       env_enetaddr);
-		}
-
-		/* Override the ROM MAC address */
-		memcpy(pdata->enetaddr, env_enetaddr, 6);
-	} else if (is_valid_ethaddr(pdata->enetaddr)) {
-		eth_setenv_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
-		printf("\nWarning: %s using MAC address from ROM\n",
-		       dev->name);
-	} else if (is_zero_ethaddr(pdata->enetaddr)) {
-#ifdef CONFIG_NET_RANDOM_ETHADDR
-		net_random_ethaddr(pdata->enetaddr);
-		printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
-		       dev->name, dev->seq, pdata->enetaddr);
-#else
-		printf("\nError: %s address not set.\n",
-		       dev->name);
-		return -EINVAL;
-#endif
-	}
-
-	return 0;
-}
-
-static int eth_pre_remove(struct udevice *dev)
-{
-	struct eth_pdata *pdata = dev->platdata;
-
-	eth_get_ops(dev)->stop(dev);
-
-	/* clear the MAC address */
-	memset(pdata->enetaddr, 0, 6);
-
-	return 0;
-}
-
-UCLASS_DRIVER(eth) = {
-	.name		= "eth",
-	.id		= UCLASS_ETH,
-	.post_bind	= eth_post_bind,
-	.pre_unbind	= eth_pre_unbind,
-	.post_probe	= eth_post_probe,
-	.pre_remove	= eth_pre_remove,
-	.priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
-	.per_device_auto_alloc_size = sizeof(struct eth_device_priv),
-	.flags		= DM_UC_FLAG_SEQ_ALIAS,
-};
-#endif /* #ifdef CONFIG_DM_ETH */
-
-#ifndef CONFIG_DM_ETH
-
 #ifdef CONFIG_API
 static struct {
 	uchar data[PKTSIZE];
@@ -935,7 +393,6 @@ int eth_rx(void)
 
 	return eth_current->recv(eth_current);
 }
-#endif /* ifndef CONFIG_DM_ETH */
 
 #ifdef CONFIG_API
 static void eth_save_packet(void *packet, int length)