arm: Remove tx25 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 172 deletions

diff --git a/include/configs/tx25.h b/include/configs/tx25.h
deleted file mode 100644
index 834b6169f6..0000000000
--- a/include/configs/tx25.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
-/*
- * KARO TX25 board - SoC Configuration
- */
-#define CONFIG_MX25
-#define CONFIG_MX25_CLK32		32000	/* OSC32K frequency */
-#define CONFIG_SYS_TIMER_RATE		CONFIG_MX25_CLK32
-#define CONFIG_SYS_TIMER_COUNTER	\
-	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
-
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 kB for U-Boot */
-
-#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_SPL_LDSCRIPT		"arch/$(ARCH)/cpu/u-boot-spl.lds"
-#define CONFIG_SPL_MAX_SIZE		2048
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_TEXT_BASE		0x810c0000
-#define CONFIG_SYS_TEXT_BASE		0x81200000
-
-#ifndef MACH_TYPE_TX25
-#define MACH_TYPE_TX25	2177
-#endif
-
-#define CONFIG_MACH_TYPE MACH_TYPE_TX25
-
-#ifdef CONFIG_SPL_BUILD
-/* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x30000
-
-#define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
-
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_SIZE		(128 * 1024 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
-#else
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Memory Info
- */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* 1 MiB */
-/*
- * Board has 2 32MB banks of DRAM but there is a bug when using
- * both so only the first is configured
- */
-#define CONFIG_NR_DRAM_BANKS	1
-
-#define PHYS_SDRAM_1		0x80000000
-#define PHYS_SDRAM_1_SIZE	0x02000000
-#if (CONFIG_NR_DRAM_BANKS == 2)
-#define PHYS_SDRAM_2		0x90000000
-#define PHYS_SDRAM_2_SIZE	0x02000000
-#endif
-/* 8MB DRAM test */
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1+0x0800000)
-
-/*
- * Serial Info
- */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-#define CONFIG_CONS_INDEX	1	/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200	/* Default baud rate */
-
-#define CONFIG_MXC_GPIO
-
-/*
- * Flash & Environment
- */
-/* No NOR flash present */
-#define CONFIG_SYS_NO_FLASH
-#define	CONFIG_ENV_IS_IN_NAND
-#define	CONFIG_ENV_OFFSET	CONFIG_SYS_MONITOR_LEN
-#define CONFIG_ENV_SIZE		(128 * 1024)	/* 128 kB NAND block size */
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-
-/* NAND */
-#define CONFIG_NAND_MXC
-#define CONFIG_MXC_NAND_REGS_BASE	(0xBB000000)
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		(0xBB000000)
-#define CONFIG_JFFS2_NAND
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-/* U-Boot general configuration */
-#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
-/* Print buffer sz */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-		sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-/* U-Boot commands */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR		0x1f
-#define CONFIG_MII
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BOOTDELAY	5
-
-#define CONFIG_LOADADDR		0x81000000	/* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc0,${baudrate}\0"			\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addmisc=setenv bootargs ${bootargs}\0"				\
-	"u-boot=tx25/u-boot.bin\0"					\
-	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"		\
-	"hostname=tx25\0"						\
-	"bootfile=tx25/uImage\0"					\
-	"rootpath=/opt/eldk/arm\0"					\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm\0"						\
-	"bootcmd=run net_nfs\0"						\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"update=nand erase 0 40000;nand write ${loadaddr} 0 40000\0"	\
-	"upd=run load update\0"						\
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(IMX_RAM_BASE + IMX_RAM_SIZE)
-
-#endif /* __CONFIG_H */